Jump to content
SAU Community

Recommended Posts

I've worked in the compliance industry for a number of years and came across a motor which had a very usual marking on the engine block when I was attempting to get the engine number. It was in a 1994 R32 GTR Vspec with the an engine number that was something along the lines of the following

R B 2 6

R

7 * * * * * X

(The R should sit directly above the X marking)

I believe the X denotes that the block was sold seperately from nissan. That when a engine block is bought from nissan it will have this marked on it and the block requires it to be restamped. What I don't get is what the R marking above the X stands for. The stampings all look factory, but I could be mistaken. Does anyone know what this R marking could stand for? Does it mean that it is an N1 motor?

I also pulled the front cam cover off and all the bolts where brand new, as if it had come like that from factory. I'm quite baffled to know what it could be..

Edited by Baz
Link to comment
https://www.sau.com.au/forums/topic/192670-rb26-block-with-r-engine-number/
Share on other sites

The number on the block that has .........X and then a R above is definatly a R34 Nur engine, these engine's are build by Nissan Motorsport and have the following specs in stead of the STD Rb26:

- R34 NUR cams little different then STD R34

- N1 block (24U)

- N1 piston rings

- piston + conrods weight balanced

- crankshaft weight balanced

- Nismo F112 bearings main + conrod

- N1 oil pump

- N1 waterpump

As you state all the bolts, nuts, the complete bare engine is new from Nissan Motorsport.

Here are some pics of a few I have/had:

img26692oy6.jpg

img26642eq9se1.jpg

Yup.. the engine number on the side of the block was exactly as the same as the one on the picture as above. The only thing I though is that it did not have variable valve timing such as found in the R34 GTR motors. Does that mean that it is not a R34 NUR motor then?

VCT is what I meant to say. Where exactly would the 24U be stamped on the block? Because I'm pretty sure there was a 05U cast into the underside of the block.

No they don't have VCT either. Where do people hear these crazy things?

VCT is what I meant to say. Where exactly would the 24U be stamped on the block? Because I'm pretty sure there was a 05U cast into the underside of the block.

On the passengers side in line with the collant outlet , close to number 3 cylinder, not easy to see under the turbos, you have to look up from under the car.

  • 1 year later...
  • 2 weeks later...
G'day,

Can anyone please send me pics of the RRR block engine stamp. I believe the numbers and letters are actually raised not stamped as such, any help would be appreciated,

Thanks

KG

If you read my post above you will note that the Nismo GT block had RRR in caps ( just like the normal 5uand 24U blocks) on the turbo side close to number 3 cyl inline with the coolant pipe.

The engine number is in the normal place on the inlet side near the dipstick, RRR blocks have RB26 NS Axxx, just a 3 digit number from 001 to 200 , only 200 blocks made.

  • 7 months later...
Wondering if R means refurbished or remanufactured?

yeaqh ive seen this on a few cars that had reco's in japland. I stamp all mine to and engrave certain things on the wings to remind me whats inside :)

  • 3 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Getting Dangerously close to being ready to go back in the car. Rockers in with clearance castings now (and a quick check with the USA for the torque settings for the larger custom bolts) Covers and ported FAST Manifold sitting on there. Not fully tightened down as there's some clearancing required for the water pump with the earlier LS1 water pump styles. Example of the clearancing needing to be done: The body has to be ground a little but I'm struggling finding an actual piece of it. The later variant of water pump resolves the issue as the manifold was designed around it. It only came on the VZ LS1 in Australia, it got a different pulley for Gen4 motors. (it also costs $450... vs... $0).
    • https://files.fm/f/5atwkuvcjd
    • Doing some height adjustment on front suspension on a v35 and noticed this. The passenger side looks correct. So wondering what's happened to the drivers side?
    • Oh...I have the electric mirrors as well iirc ...they're in the same state as just about every other R31 door mirrors, with the 3 plastic screw towers broken/cracked in the plastic molding. All the interior is 'dry', so the mirror switches etc likely all work fine. Some pics below of the trimmer pieces ~ looks to me like previous owner, painted chrome finished trims with black paint ...ergo, the chrome underneath is likely a-ok... ...starts to look yukky posting stuff like this, how much did it cost in fuel on your last sortie up this way?...me just thinking aloud, borrow someone else's 4cyl to cut costs, come do your own pick'n'pull like before to save me some bother...hehe.. but whatever, I'll just earmark bits I know you want, because the way this is all panning out, I'll be able to retire the R31 from daily duty at long last, replacing it with a Subaru wagon I'm lining up in the wings...ergo, my attitude towards the donor pinny shell is starting to wane a bit, and I'm more than happy to help you out there... Like you say though, no rush...and I'll guarantee we won't be moving too far from this locale at any rate 😎
    • Cool, I’m just down Sydney today. Not much time to get online.
×
×
  • Create New...