Jump to content
SAU Community

Rb30 Front Diff Adaptor Plate

GTS4WD
 Share

Recommended Posts

GTS4WD Grand Master

GTS4WD

Posted
Posted

Hay guys..

Im doing a 25/30 conversion and Im looking for a sump adptor plate for an RB30 so as it will mate up to my front diff.

I know there is such a thing.

Does anyone have one?

How much?

Where from?

And how does it acctually work? If the wholes in the diff dont mate up to the holes in the bottom end, how do they get them to mate?

Cheers guys!

Link to comment
https://www.sau.com.au/forums/topic/192693-rb30-front-diff-adaptor-plate/
Share on other sites
N1GTR Grand Master

N1GTR

Posted
Posted

Ive got one

I think its from Pro Engines in Canberra, or it could be the Fitzpatrick Speed Works one. I know that sounds wierd, but its one of those things you pay for and never see, you know what i mean :)

GTS4WD Grand Master

GTS4WD

Posted
  • Author
Posted

WHAT!?! $900!?!?!?!

For that price you'd almost expect an LSD to be thrown in as a free-bee!

Thanks for the imput guys!..

a couple of PM's have been sent.. so Ill have to see whats happening..

I just think that $900 is a stupendus amount of money!

Much appreciated fellas!

Been awesome help!

:huh:

Beer Baron Grand Master

Beer Baron

Posted
Posted

well personally I reckon $900 is pretty bloody reasonable. have you ever seen a sump adapter? have any idea of the work they have put into developing and then producing it?

GTS4WD Grand Master

GTS4WD

Posted
  • Author
Posted
well personally I reckon $900 is pretty bloody reasonable. have you ever seen a sump adapter? have any idea of the work they have put into developing and then producing it?

Thats why it pays to shop around.. :)

thats why the thread was started.. and Shanes a good bloke :D

I just think.. $900 is a STUPIPD amount of money.. Especially for a uni kid!.. I figure.. with $900 I could get an awesome system! A re-tune, a shitload of random bits and peices - Seats, suspension goodies, guages etc. etc. etc. chip in a few hundred more.. and I got a Power FC, LSD, Coilovers, Brakes..

It just seems so much more practicle to spend that amount of money on other peices.

GTS4WD Grand Master

GTS4WD

Posted
  • Author
Posted (edited)

How many of the holes do aligne?

And with an adaptor plate.. if you put a place something between the block and the diff.. it will raise the block, or lower the diff. According to which one it does, it will play around with geometry of the front drive shaft and miss aligne it.

How do these adaptor plates work? Is it just a different diff housing?

what about re-drilling into the block/housing so as they to align?

Edited by GTS4WD
Beer Baron Grand Master

Beer Baron

Posted
Posted

dude they have nothing to do with the diff at all. they go between the sump and the block. the diff does not sit under the block mate. it's beside the block. basically it allows you to bolt a GTR/GTS4 sump to a 30 block. again, the diff is not really in this equation at all except that the diff housing is integrated into the sump (hence the need to fit your original sump to a new block).

proengines Rising Star

proengines

Posted
Posted
WHAT!?! $900!?!?!?!

For that price you'd almost expect an LSD to be thrown in as a free-bee!

Thanks for the imput guys!..

a couple of PM's have been sent.. so Ill have to see whats happening..

I just think that $900 is a stupendus amount of money!

Much appreciated fellas!

Been awesome help!

:)

$900 is a fair bit of money, depends how much you value your own time. For $900 you get an adaptor plate that fits, the bolt holes are drilled, tapped and countersunk in a CNC mill, a silicone relief is milled in the plate, the same design as the original sump so it actually does seal oil, you get every fastener needed to bolt it all up, laser cut steel templates to notch the block, a pickup that fits inside the sump, so no need for complicated external pickups even detailed instructions on how to fit it.

Then again, you could buy a piece of 10mm steel plate for $30, a bench drill at super cheap for $50 and a piece of chalk and do it yourself... It sounds like a lot of money until you try to do it yourself. A few people on this forum or gtr.co.uk have bought them and seem quite happy with them.

post-8303-1194863983_thumb.jpg

post-8303-1194864032_thumb.jpg

Maybe I should add a sticker with some catchy jengrish phrase like "The joy of sump bolting" and make it $1000 :blush:

s13_Skyline_inside Proficient

s13_Skyline_inside

Posted
Posted (edited)

900 is pretty good if ask me, as said by pro engine, consider the time etc to make one, cnc machined quality and all the bit included, not to mention it 100% works by sealing the oil and its strong, have a look at the bottom of an rb26 block and then look at the bottom of your rb30 block, then think about making one that will actually seal and be as strong yourself at home, and yeh i think they're about 10mm thick so it's lower your sump 10mm and that means lowering your diff so yeh the drive shafts will be missaligned and put more pressue on the cv joints. so you might want to raise the engine from the mounts by 10mm to keep the sump where it was orignally and yes you probably will have clearance issue's up top given the extra 30mm extra up top the rb30 block has over other rb engines. :(

(biggest turn off doing the conversion in a gtr not a gtt/gtst :domokun: )

Edited by s13_Skyline_inside
Scooby Veteran

Scooby

Posted
Posted (edited)
Maybe I should add a sticker with some catchy jengrish phrase like "The joy of sump bolting" and make it $1000 :ermm:

Having seen the Proengines kit I can tell you it is excellent. Remember also that you will soak up a lot of time and money rooting about if you go with an external pick up unless you've got access to someone that has done it before, so effectively the plate is only $550 or so.

Greg I think we need to work on your Japlish. For example 'The strong freedom of the rising sump power, you feel' is more accurate. :D

Edited by Scooby
R34GTFOUR Mentor

R34GTFOUR

Posted
Posted
900 is pretty good if ask me, as said by pro engine, consider the time etc to make one, cnc machined quality and all the bit included, not to mention it 100% works by sealing the oil and its strong, have a look at the bottom of an rb26 block and then look at the bottom of your rb30 block, then think about making one that will actually seal and be as strong yourself at home, and yeh i think they're about 10mm thick so it's lower your sump 10mm and that means lowering your diff so yeh the drive shafts will be missaligned and put more pressue on the cv joints. so you might want to raise the engine from the mounts by 10mm to keep the sump where it was orignally and yes you probably will have clearance issue's up top given the extra 30mm extra up top the rb30 block has over other rb engines. :D

(biggest turn off doing the conversion in a gtr not a gtt/gtst :( )

i dont think the 10mm would make that much difference to the cvs, cause at the end of the day thats what they are designed to do, otherwise everytime there was travel in the suspension or anyone that lowered a gts4/gtr would be snapping shafts left right and centre

i'll most likely get one of these kits as soon as my build date gets a bit closer :O

GTS4WD Grand Master

GTS4WD

Posted
  • Author
Posted
Stupid amount of money for a uni kid?

So why try build a 25/30 into a 4WD if your a "uni kid" that 'cant afford'

You either pay good money for good work, or mediocre money for shit :ninja:

Alright.. settle down.. No need to get ur panties in a twist.. :O Its just alot more than I expected it to be.

I work hard for my money so why not spend it on something I enjoy?..

hmm.. theres been some good points raised guys!

Definately worth thinking about..

Its alright.. its just gonna take me a little longer to finish the build.. :( no worries..

Thanks again guys!.. And feel free to add more ideas/criticism im just sorting out my parts and ideas for the build.. so every bit helps.. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Are you an oil nerd?

      By Kinkstaah · Posted

      I think the concept is highlighting the various scenarios where thicker oil helps, and thicker oil potentially doesn't help and only generates heat and costs power, in turn for safety which isn't actually any safer (unless you're going real hot). If anything this does highlight why throwing Castrol 10w-60 for your track days is always a solid, safe bet. 
    • GTSBoy
      Are you an oil nerd?

      By GTSBoy · Posted

      Jason should have shown a real viscosity vs temp chart. All the grades have very little viscosity difference at full operating temperature.
    • dbm7
      BCNR33 Blower Motor Resistor - Testing

      By dbm7 · Posted

      Oops... I meant to include the connector  view... BR/W - power from fuse L/W - motor negative to fan control amp (and off to HVAC pin19) OR/B - PWM signal (from HVAC pin20) B --  ground  
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Yep, if you are applying filler it sounds like there is something wrong with the body lol. Safe to assume there is going to be a lot of sanding going on if your still applying fillers.  Picture a perfect bare metal panel, smooth as glass. You lay down your primer, it's perfect. (why are you going to sand it?) You lay down the colour and clear, it's perfect. No sanding at all took place and you've got a perfectly finished panel.  You won't be chasing your tail, sounds like you were prepping to start laying filler. If your happy with the body after the sanding, there is some bare metal exposed and some areas with primer, no issues at all, start laying the filler. You are safe to lay filler on bare metal or primer (of course check your technical data sheet as usual for what your filler is happy to adhere to).  This isn't a 100% correct statement. There is primer that is happy to adhere to smooth bare metal. There are fillers that are happy to adhere to smooth bare metal. Just make sure you're using the right materials for the job.  Typically if you are using filler, you would go primer, colour and clear. I've never seen any instances before where someone has laid colour over body filler (maybe this happens, but I haven't seen it before). So your plan sounds pretty normal to me. 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I don't think there's any way someone is push starting this car.. I honestly can barely move it, and moving it and steering it is just flat out not possible. I'm sure it is, but needs a bigger man than me. I have a refurbished starter now. The starter man was quite clear and consise showing me how nothing inside a starter really should contribute to slow cranking, and turned out that for the most part... my starter was entirely fine. Still, some of the wear items were replaced and luckily it didn't show any signs of getting too hot, being unfit for use, etc. Which is 'good'. I also noticed the starter definitely sounded different, which is a bit odd considering nothing should have really changed there.... Removed and refit, and we'll pretend one of the manifold bolts didn't fully tighten up and is only "pretty" tight. GM only wants 18ft/lb anyway. I also found a way to properly get my analog wideband reading very slightly leaner than the serial wideband. There's Greg related reasons for this. The serial output is the absolute source of truth, but it is a total asshole to actually stay connected and needs a laptop. The analog input does not, and works with standalone datalogging. Previously the analog input read slightly richer, but if I am aiming at 12.7 I do not want one of the widebands to be saying 12.7 when the source of truth is 13.0. Now the source of truth will be 12.65 and the Analog Wideband will read 12.7. So when I tune to 12.7 it'll be ever so slightly safer. While messing with all of this and idling extensively I can confirm my car seems to restart better while hot now. I did add an old Skyline battery cable between the head and the body though, though now I really realise I should have chosen the frame. Maybe that's a future job. The internet would have you believe that this is caused by bad grounds. In finding out where my grounds actually were I found out the engine bay battery post actually goes to the engine, as well as a seperate one (from the post) to the body of the car. So now there's a third one making the Grounding Triangle which is now a thing. I also from extensive idling have this graph. Temperature (°C) Voltage (V) 85 1.59 80 1.74 75 1.94 70 2.1 65 2.33 60 2.56 55 2.78 50 2.98 45 3.23 40 3.51 35 3.75 30 4.00   Plotted it looks like this. Which is actually... pretty linear? I have not actually put the formula into HPTuners. I will have to re-engage brain and/or re-engage the people who wanted more data to magically do it for me. Tune should be good for the 30th!
×
×
  • Create New...