Jump to content
SAU Community

Sydney Break Ins

Trooper

By Trooper,
in New South Wales

 Share

Recommended Posts

D_I_F Grand Master

D_I_F

Posted
Posted
If they have a buzzer, they'll be back. Get the cars out ASAP

I rang up strata today.. they have only recently changed the buzzers and I told them this isn't good enough they are going to have to take better precautions

D_I_F Grand Master

D_I_F

Posted
Posted

I just spoke to the strata manager.. Hes a f**k..

Apparently we have had complaints because we have had 5 cars in the garage and a bike??? I don't know where he got the 5 from I park the bike up against a wall away from the cars..

They have also had complaints because we were spraying a set of wheels in there the other day WHICH WE PUT f**kING NEWS PAPER DOWN and changing wheels.. Apparently this isn't a work shop guys.

Then hes like we will look into changing buzzers again.. I said to him there is no point they are just going to get back in if they have a self learning remote.. hes like "durrhhh what's that"

He obviously doesn't know much.

Trooper Experienced

Trooper

Posted
  • Author
Posted
looks like the cops arent do their job again

they can fine us and crush our cars for driving around

but cant do shite about stopping theives

geee we have a excellent police force,

I would not really blame the cops about this one. I am upset at strata management.

even after this has happened guess what brilliant idea they had. They are putting bash plates over the door that was broken into. Keep in mind there are another 6 doors exactly the same without the bash plates... I wonder if they will just go to another door if they want to get back in again?

Tight arses - how much is a piece of steel plate ? Compare that to nearly 50k damage last week. hmmmm

Beware of people putting tape over the gate sensors too, they started trying to do that here as well... follow someone inside and put something over the gate sensor so it doesnt close.

Another way of them getting in apparently is a safety switch on a lot of the gate motors, they are 'clever' enough to put a hook on a pole, stick it through the gate and pull the little lever. Places have been putting little boxes around the safety switch so you have to stick your finger up inside it to release the gate to try and stop this.

Anyone want to start up a window repair business with me? :S

Trooper Experienced

Trooper

Posted
  • Author
Posted
Jesus!!!!!

Just move up here Heath...

Crims just aren't that clever up here (yet)

Haha I am trying as hard as I can...

4 exams and 16 days to go and the removal truck arrives :D:D:D:D

Car should be nice and safe at my parents place.

Car will be in the workshop for the entire time, i'll get the truck to pick my car up from the workshop.

MBS206 Grand Master

MBS206

Posted
Posted
I would not really blame the cops about this one. I am upset at strata management.

even after this has happened guess what brilliant idea they had. They are putting bash plates over the door that was broken into. Keep in mind there are another 6 doors exactly the same without the bash plates... I wonder if they will just go to another door if they want to get back in again?

Tight arses - how much is a piece of steel plate ? Compare that to nearly 50k damage last week. hmmmm

Beware of people putting tape over the gate sensors too, they started trying to do that here as well... follow someone inside and put something over the gate sensor so it doesnt close.

Another way of them getting in apparently is a safety switch on a lot of the gate motors, they are 'clever' enough to put a hook on a pole, stick it through the gate and pull the little lever. Places have been putting little boxes around the safety switch so you have to stick your finger up inside it to release the gate to try and stop this.

Anyone want to start up a window repair business with me? :S

A mates old unit had a security gate, wasn't too bad except for the breaking every second day, but the safety release wasn't a handle, you needed to open a door thing up, and then use a ratchet piece to crank the gate open... Do it from outside and it'd break your arm!

Mind you, people just used to climb through the break in the fence!

TTT Grand Master

TTT

Posted
Posted

It's the same in QLD guys..

I couldn't believe it when I went outside one morning to find that someone had stolen one of my "4 for $17" solar lamps from near the mailbox.

I found it down the street in bits.

It's a terrible world this..

:worship:

f**k Sydney.

there is nothing that makes it worth staying there.

As if you would want to live in that sort of society.

These things don't get better.

they get worse.

The way things are in sydney now is what you are going to be wishing it was like in 3-5 years time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      One Headlight isn't working - Driver Side Fuse Keeps blowing

      By GTSBoy · Posted

      Yeah, but knowledge of one wire's insulation worn through to short on earth implies the possibility of other wires doing the same. I had my power steering die, because the wire that runs to the solenoid valve on the rack runs in the same loom as the power wire for the O2 sensor. And when the O2 sensor/wire did something stupid and burnt part of that loom to death, the only indication was the shit(ter) fuel economy and the heavy steering. It took deep excavation of the looms in the bay to find the problem. Not wear through in that case, but similar shit.
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      Ah, I thought he'd wired it to one of the spare ECU inputs! Too long ago since I read that post, ha ha. I've been arguing with radiators, harmonic balancers, alternators and rust since reading it.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Correct. The ECU cannot read oil temp. (Well, I think it probably can in some situations. I did have the thought of potentially repinning the ECU when I was doing oil pressure). I am using this into the MPVI dongle, so that the MPVI dongle can read oil temperature. It is attached to a VDO gauge which is obviously calibrated to whatever curve the sender actually is using. This would be easy if I could setup a table of voltage to temperature like many sensors, but it appears I cannot do this and can only setup the transform rule which appears to be Input (voltage) x Multiplier, and add an offset. This to me means it MUST be linear. So it may be a complete waste of time wiring this into the ECU. The idea was that the MPVI3 has standalone logging. I wanted to use this instead of a laptop with serial cable (for wideband) for long datalogs. Given the wideband also has electric interference, I may never trust this either in a world where the serial wideband and the analog output wideband do not agree. Last time I did a trace I could see the two wideband traces follow each other, but one was a little leaner than the other. I plan on playing with voltage offsets and actually driving the thing to see how close they correlate. If they never correlate... then, well, maybe I'll never use either. Ideally I'd like to have the Analog wideband read ever so slightly leaner than the serial one, because the serial one is 'correct'. Tuning the car to be ever so slightly too-rich would be the aim. Not needing to have a laptop flying around in the footwell connected with cables is... an advantage. About the only one from the forced upgrade to MPVI3.
    • MBS206
      One Headlight isn't working - Driver Side Fuse Keeps blowing

      By MBS206 · Posted

      Hopefully not, since he knows the fuses work ha ha ha
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I don't think he's got it on a gauge and on the ECU. I think he's got it on the gauge and on the HPTuners DAq thingo. Remember, we're talking about oil temp here, not something that the ECU is actually interested in for its own sake.
×
×
  • Create New...