R33 GTR clutch problem

[33GTR]

I recently bought a 1996 GTR with an unknown single plate heavy duty clutch installed by Hills mtorsport a few weeks back.

First thing i noticed was the clutch grips extremely high on the pedal making it very awkward to drive, got used to it quickly so no probs. This arvo finally gave it a decent launch at about 5000rpm and took of nicely with no slip. The problem is after the launch the car wouldnt engage gears when the clutch was let out, it would just grind. Let the car cool down and afterwards was fine. Second problem is wierd, when you turn the car off sometimes it "hops" a little as if you let the clutch out with the car on.

Could it possibly need adjusting? Is the pick up point odd? Could the slave cylinder need adjusting? Otherwise the clutch is fine and does not slip under load or launch.

Any advice would be appreciated.

cheers

[ma160802]

i also have the same problem? but dont know what it is . does anyone know what it is?

[ma160802]

hey buddy can u please give me a call on 0404810421 . I just had my clutch done by hill motor sports and its doing the same thing.

thank

matthew

[ma160802]

bump

[ricknismo]

I think you have a button clutch and the fact it is off the floor is due to the clutch booster.

at a guess maybe the fingers on the pressure plate are uneven or flywheel not machined properly