Jump to content
SAU Community

Recommended Posts

Im no HeKitC KrNt but on a serious not. Apart from f**king you turbo in the long run, its there a down side to this. A few of my friends who was set their cars up for drift have blocked up their BOV's. I never thought to ask them why...Is there any particular reason for this?

Edited by Lock_to_lock

omfg you want some dose uleh?

You'll be a fully sick hectic bro, and all the women will get instantly wet when they hear the tuutuuutuuutuuut and dive in your windows just because they think its all fully sic bro uleh bling.

Then all you need to do is have a big mofo rocket switch, so that you can rig up some fully sic atmospheric blow off valves, so when you had enough of the fully sic tuutuuutuuutuuutuuutuutuuutut you can make it go WHOOOOSH. (cough, stall, omg uleh, etc)

The atmospheric BOV will be even more fully sic, and you'll need to fit bigger windows because there will be more womenz getting fully sic and wet and trying to dive into your car.

Then wehn you have too many women, you can turn it back to some fully sick dose.

apparantly blocking off the bov will give u less lag, thats the only advantage i believe

im horrible at explaining things but thats a load of poop. if anything, blocking your recirc valve or not running one, will slow the turbo down at a much faster rate. although its been proven that you can 'boost spike' it for a second apon an extremely fast gear change. Basically you have to be quick enough to change gears before the already built up boost pressure escapes through your filter, if you can do that and open your TB back up in time, its more inclined to throw the boost through your intake rather than out through the turbo because the blades are already spinning that way, and its the easiest direction for the air to flow. So say your usual 10psi of boost, supposively you may spike it to 13psi for a split second after your gear change. ive read about various WRC cars using this technique.

I think this is where people get the misconception about it cutting a bit of lag.

anyway, i told you im horrible at explaining things but i hope that makes atleast a little sence. :P

just thought a little more in to that, and i missed the obvious. What i explained, IF you can change gears fast enough, it WILL cut back on the lag. im not thinking straight tonight. sorry mark.

atleast i was able to explain the theory a little :P

Curious to know for it to flutter, Do you just block the plump back pipe? or do you completely remove the bov and block everything? as a friend asked and I couldn't give him a proper answer because I have no clue, A apexi pod filter is plenty of whoosh for me :P

Bro..................i put my skyline on it, it will annoy the crap out of you with in a month

and you would wanna take it off.......................

Lol btw...........im leb and i hate that sound. uleh

lol

omfg you want some dose uleh?

You'll be a fully sick hectic bro, and all the women will get instantly wet when they hear the tuutuuutuuutuuut and dive in your windows just because they think its all fully sic bro uleh bling.

Then all you need to do is have a big mofo rocket switch, so that you can rig up some fully sic atmospheric blow off valves, so when you had enough of the fully sic tuutuuutuuutuuutuuutuutuuutut you can make it go WHOOOOSH. (cough, stall, omg uleh, etc)

The atmospheric BOV will be even more fully sic, and you'll need to fit bigger windows because there will be more womenz getting fully sic and wet and trying to dive into your car.

Then wehn you have too many women, you can turn it back to some fully sick dose.

point proven.. this ladies and gents is what we call a douche bag..

the whole point to this exercise is for me to learn a bit more about my car and f**k around with it and not really have to spend money..

as for the attuides on the forums most have been nice to try to help me with any queries.. for the rest with the flame wars tryin to stir shit its just sad.

all i wanted to kno was ( if its possiable, how would i go about it, where there any issues with it and half the fknin posts are dick heads actin like the scum of the earth, im sorry but you are on a even playin field with all those penis hair cut c**ts.

And thank you to all that answered my question

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Cheapest Jaycar one is only $65.
    • Probably best way would be using a proper dB / SPL meter lol Buy one and ship it from state to state to have a consistent test device lololol  
    • Not electric car good of course, it's still just a crappy old ICE
    • Yeah, but the good news is that can all be tuned out...the V37 has excellent throttle response now, and with the tiny factory turbos is pretty quick without lag
    • I did change bodyshops. The most recent place was very fast. I think the trick is to have smaller, simpler jobs. A front end repaint and some (extensive) sideskirt and fender stuff is a 'small cash' job for them. It was expensive but 'worth' it purely cause: 1) They did everything great 2) They did everything fast Get what you pay for maybe? Pictured: Very stock looking car from my very old phone. I did realise that oncoming traffic would probably be like "Oh look at this guy, commuting around in a GTR!" (until they see the side profile). This is the sad state of my fender liners and front fitment with my current stock GTR sized wheels (18x9 +30) This is how the rear sits with a 25mm spacer. I say 25mm because it's actually a 20mm spacer sitting on the studs which are ~30-31mm, and the wheels have a ~5mm cutout. So... this is very not safe to drive. This is the other side.. .with a 22mm spacer. Yes, the studs are ~27mm. Yes they're different both sides. I spent a fair amount of time measuring. This was the old pod setup behind the box in the past. Old vs New Pod she tells you not to worry about:   Turns out I measured this pod filter pretty damn accurately which I was chuffed about. I went for a ~3hr drive for 'testing' reasons up into Healseville hills. Believe it or not, the induction noise is the same between small and large pod. I guess it has more to do whether a pod is *present* or not, and the diameter of the pipe. It does sound very decent in cabin though (and extremely 'smooth') - Though behind the car the exhaust noise is nonexistent now. So uh, it's all for the driver. I'm confident it has to be quieter than @Dose Pipe Sutututu's car. I should test it. Is there a way to do it with an app or something we can both agree on? (we are both very old men now competing for quietest car) I've texted Trent at Chequered to book in to see some before/after. I can now twist the pod entirely out of the engine bay on the dyno to really rule in/out any intake restrictions. And/or remove the pipe entirely which I will probably do for testing reasons. The logs show *maybe* a difference in ambient KPA vs Intake KPA at wot. But I'm talking the difference to -3/4 before to maybe -2/3 now. The tune is not wildly out or even changed at all. The only takeaway I have is the car is on 17% ethanol as it's still got the fuel from the dyno in it. It's plausible that that tune would have resulted in the car erring on the side of being too rich (it was) and right now it seems to be bang on perfect or within -0.5% either side of target. I was tempted to take it to a Drag day to see what MPH it would trap (and tune the car) but then I wouldn't have a number and a pretty line. I may do that after I re-hit the dyno, purely to go to LS1tech and shout about how their dynos are all very inaccurate while my low HP car traps the same MPH as cars with the same setup in the US, who make 375RWKW (supposedly). It was safe to say Mr Mamo was not really happy with me posting the results yet. So I owe it to at least try the intake thing for my own sake and not besmirch people who want to buy a similar USA heads and cam setup and get disgusted that they make lower HP than simple bolt-ons which can be up to the "330rwkw+" kw region over there - Which here equates to about 270kw. (and runs the same 115-118mph)
×
×
  • Create New...