Jump to content
SAU Community

Recommended Posts

  • Replies 95
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Some interesting points from Bill Tuckey.

Try read it with an open mind and some patience as it is long, but this is the message that needs to get out to convince people that staying under the speed and .05 limit will not guarantee your safety on the roads.

It's time the government stopped making revenue from speed.

http://www.theaustralian.news.com.au/story...5010800,00.html

Emphasis in all Australian states has shifted from surveillance and visual deterrence to speed measurement, as if this is the main crash factor apart from alcohol.

The overemphasis on speed as a factor justifies government investment in ever more sophisticated technology to trap more vehicle users; in fact, government polling shows this gives voters a nice warm feeling because the authorities are seen to be doing something. Thus, as mobile road patrols vanish, we are losing the ability to check on the use of phones, suspended licences, outstanding warrants, underage drivers, the wearing of seat restraints, lane discipline, tailgating, unroadworthy vehicles and the rest.

No longer do police sit and watch for those rolling through stop signs, as they did in the 1970s, nor can they lurk at railway level crossings to stop the growing incidence of vehicle-train crashes. They can't. They simply don't have the manpower, or are diverted to more revenue-worthy pursuits.

Thanks for that Geoff.

and pulling all the bombs off the road...

Went past a 40/45 series land cruiser this morning on the way to the shops to get milk and it was so full of rust if he had hit a pole it would fall apart...

I could see the pedals/feet through a rust hole in the door at the lights...

Man i agree with that Australian article, it's all about public perception to what causes fatal crashes and not actual facts. Same as the whole every import driver is a hoon perception and that hoon's cause fatal crashes....

  • 3 weeks later...
Tarragindi off-ramp (M1) on Brisbane's Southside

wow, they're going to get a shitload of tickets out of this one

Saw the camera busy flashing yesterday (targeting car towards city).. i guess not many people realize there was a camera installed in between highway.

Also spotted some lines on Kingsford smith drive somewhere near Harvey st (Eagle Farm) ..? can't see the nice little box tho.. :D:D Anyone seen this ?

  • 3 weeks later...
As far as I can tell it is about where the red circle is in the map, on the Hwy there is a gap where the popo used to sit with their radar trap.

That's the one that i saw few weeks ago busy flashing.. so i guess it just started to operate now.. :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • No. GKTech arms have spherical bearings in them. No bushes. You will not need bushes for those arms. The sphericals are a bit of a maintenance nightmare. I have replaced all of mine several times in the 5 or so years I've had them, and I have the arms out regularly to clean and lube the balls. Worth the pain on an R32, because the standard arm design is trash. If you need the camber adjustment, there are other options (than the GKTech ones), although I would still lean towards and prefer the GKTech ones, even with the maintenance load of the sphericals. The caster adjustment is also highly valuable, allowing for setting the car up to drive straight. There are a million options for these, including the GKTech ones. I've had Tein rods on mine for 20 years and the balls are much less trouble in that location. Never given me a moment's pain. All positives, no negatives. I consider them compulsory.
    • Lol yeah I ordered the clips mentioned and as far as the amayama diagrams go i think thats all I'll need. Fogured id ask, sometimes people's first hand experience doesnt always match up to diagrams haha, i guess I'll wing it and worse comes to worse I'll just deal with it as I go
    • Thanks for all that information I appreciate it. To answer your questions: - Yep that's what I mean. These guys are professional painters to so I must be missing something. It's a bit hard to explain. - With the primer landing on clearcoat, I make sure that the surrounding clearcoat is scuffed to 240 grit as my epoxy primer says that I only need to sand the area to 240 grit. - Yeah so similar to the first question, assuming that the paint landed on the unscuffed clearcoat because I've seen that happen. - Yep I want to prep the surface in that order. Only reason because epoxy primer will protect it from rust and I need that atm with this crappy Sydney weather. I think I was worried about time, if I try to put the filler down but screw it up somehow and I don't have time to sand it off and reapply it then need to put primer later that it might start to rust again so I wanted to apply the primer as quick as possible to not deal with rust.  - I just deleted some answers, I just realised after watching a video and what you said about looking at the data sheet, that I need to read the data sheet on the specific filler I'm using. It's possible now that I put epoxy primer first was a waste of time and need to go to bare metal lol
    • I did. I went to a suspension guy and he told me because I don't have adjustable camber arms it's the reason why my car veers towards the left if I take my hands off the wheel but if I drive my other every day car and take my hands off the steering wheel it goes completely straight. I think it's common with Skyline's. In order to fix the problem, I likely need gktech camber arms then nismo bushes since I have poly bushes atm, then a wheel alignment after that. With my car if I take my hands off the steering wheel on a really bumpy road before stopping at a light I have to hold my steering wheel somewhat tight otherwise my car will legit just go completely in the other direction quite quickly and I'll slam into something lol instead of stopping straight. I Believe this YouTuber had the same issue and fixed it with gktech arms. At timestmap 6:05 he talks about how the car doesn't veer anymore after installing these arms.  
    • hello! does anyone have a schematic that shows how to test the blower motor resistor for the vac system? i believe the part# is 27761-15U00. I think the resistor is toast, but would like to be able to test it somehow before i embark on the journey to find a new one. cheers! 27761-15U00
×
×
  • Create New...