Jump to content
SAU Community

Recommended Posts

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

i have used mark for a long time now and they are the only ones that touch my car he is also a very good friend of mine there is always good cars there but even if there isnt that doesnt mean that the work isnt good yes he does all the work on christians car but mostly thats after hours and sometime he is closed for races but not often he's in america right now but the shop is open martin is tuning and a guy named ben does all the other work

Yeh i heard over the last few days that they have been tuning on an uncalibrated dyno, i alos heard about unsatisfied staff. Just wanted to know if its hearsay or fact.

I suppose its all irrelevant if boostworx are cheaper and do better work.

Yeh i heard over the last few days that they have been tuning on an uncalibrated dyno, i alos heard about unsatisfied staff. Just wanted to know if its hearsay or fact.

I suppose its all irrelevant if boostworx are cheaper and do better work.

Well thier decent engine builder left there to go to JMS, and now he's on the move again i think to Wheelworx!!

All i know is it seems you need to know them or know someone that knows them!!

BOOSTWORX FTW!!

word around says that tillbrooks has a bad rep for blowing cars up on the dyno. i was going to take mine there last time for a tune and i had at least half a dozen people tell me not to.

whats peoples thoughts on morpowa?

ive heard good things about tilbrooks and morpowa, but havnt heard any bad about morpowa yet i dont think, but yeh heard a few things about tillbrooks but u can never be sure whats just bs. depends where u live really, if u live north of the city morpowa is probably easier for u, if u live south of the city boostworx is probably the go.

My car is tuned by Morpowa. Simon seems good, I've got a problem with a knock sensor at the moment and he didn't hesitate to run it up on the dyno and then on the street to check it out FREE OF CHARGE. He said that i had paid for a tune and it's gotta be right. Turns out the tune was right but the knock sensor was/is faulty.

I'm happy :P

Morpowa are good & they have more workers so will generally get things done quicker (although not always for the better) but, comes at a higher $$rate. Since swapping over 16mths ago & converting several mates to BoostWorx we've found Shaun a lot more proficient with the tuning side of things (ECU's, EBC & other electronics) than Simon/ Andrew. Only prob with BW is they should be up more North way considering Troy & Shaun live up this way :).

I can recommend morpowa also. Boostworx are my first choice for tuning especially and I'll hopefully be booking my car in there soon for a 100,000km service.

However, being out north I have been to morpowa several times, mainly just for regular servicing - since they have an auto trans specialist right next door and you can book into morpowa for a service and get the auto trans serviced at the same time and morpowa handle the whole lot so its just one transaction and your car is off the road for just one day. Their prices are quite good and I've been happy with their work.

i have just my car done by tilbrooks and they did an awesome job on the car....its gone a lot smoother then before....so my experience with tilbrooks has been a good one and mark the owner does look after you well....

as for morpowa my mate used to get his car serviced there and his car was just a pain to drive.....and they never figured the problem out so he took it to tilbrooks and they sorted it all out for him and now that thing boots.....

boostworx never been there as it is way down south and bit too fair for me.....but i have heard of a lot of good things about them and will get my ecu tuned down there as they are apparently the best in tunning...

AAA+++ for Boostworx Great Blokes & Awesome Tunning,

First time i ever got my car tunned i booked in it at TillBrooks, when i turned up the guy i wont mention any names wasnt even there and they didnt know anything about the tune, plus they said it was going to cost me $600 for a tune & i would have to wait till the afternoon and it was 8am???

So i went straight off to Boostworx and was really impressed with there service :(, great price 1/4 of that and car went great!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • OK, that is a helpful description, because that sounds exactly like a bleeding issue in the clutch....these are hard to bleed manually even when the damping loop has been removed. I'd suggest bleeding again....start by filling the master cylinder up and opening the bleed nipple. Come back and check every now and then that the master cylinder is not empty. Let it gravity bleed for a few hours and see if that improves
    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
×
×
  • Create New...