My R33 Gts-t Keeps Stalling

[zafeniak]

Hi guys,

I tried searching this topic but couldn't find any info. If once of you guys could send me a link regarding this topic that would be great.

Basically, everytime a accelerate, and let go of the clutch to change gears, the car will stall. The car idles and drives fine when I am not pushing it, but as soon as I give it a lottle, itll stall when changing gears.

The car is standard apart from me putting a pod filter on in and taking off the plumb back BOW system on it to get the flutter. Do you think it could be the flutter (compression surge) that could be casuing the problem? because the air exists the filter when the butterfly on the throttle body closes, would the Air flow meter be getting reverse readings (air going out)?

I seriously am puzzled, ive got heaps of mates with the same mod as me and there car doesnt stall, has anyone had the same problem or know of a solution?

cheers

[THE_350GT]

Short answer, thats your problem taking off the plumb back system to get the flutter. If you don't want your car to stall put the standered BOV back on, or put up with the stalling.

[zafeniak]

Short answer, thats your problem taking off the plumb back system to get the flutter. If you don't want your car to stall put the standered BOV back on, or put up with the stalling.

How come it doesn't happen on other skylines?

[joeyjoejoejuniorshabadoo]

You realise you just answered your own question don't you?

Ties are ways around it, like getting a map sensored ecu, but thats a lot of cash to spend on a ghey little noise

[4drftn]

when i first got my car it fluttered because the bov was jammed. but ran perfectly. the compression surge forced the air through my HKS pod filter making the flutter...

Edited November 17, 2007 by 4drftn

[BAMR33]

god damn, another one of these threads. Whens it going to end

[MRGTR911]

god damn, another one of these threads. Whens it going to end

Hey man let the guy post.. if you aint gonna help him go do something better with your time...

[TRUSTM3]

You know it totally screws with the AFM signal and the air fuel ratio when there's air not goin where its supposed to. Put the pipe back on and LEAVE IT ALONE. For gods sake man its just a stupid noise anyway......