Jump to content
SAU Community

Auto To Manaul Conversion.

Xeaon

By Xeaon,
in General Automotive Discussion

 Share

Recommended Posts

Xeaon Collaborator

Xeaon

Posted
  • Author
Posted

Ok I have done some research and found a list.

Please confirm that these are the only parts I need for a conversion. Thanks.

Part list.

g'box,

pedals,

pedalbox,

clutch master cylinder,

drive shaft,

g'box mount and cross members,

center console,

gear stick,

gear stick cover,

pressure plate,

clutch (i recommend use new clutch)

flywheel,

gear knob (optional)

DanS15 Contributor

DanS15

Posted
Posted

Well if thats the case I can't think of any other parts you would need to supply them with.

If your buying the gearbox from a jap importer sometimes they leave a small section of the driveshaft in the back of the box to stop the oil spilling out during transit. They just cut it with an oxy the lazy buggers. If they do this then I dont think you would have to buy one cos u can just swap the uni joints around from your auto driveshaft. Should check on this cos it will save you some money.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • niZmO_Man
      forum.r31skylineclub.com down or gone?

      By niZmO_Man · Posted

      We will review wtf is going on, but if you made any donations let me know and i will follow it up with the admins
    • MBS206
      Pillar gauges

      By MBS206 · Posted

      See, that button sounds like perfection Duncan! My eyes really don't like light shining at them from a dash when I'm driving. Being part red colourblind, I've found for most cars that I can change colours on, I set everything to red, so my eyes see the elast amount of colour! I miss normal gauges in cars
    • niZmO_Man
      R33 rear seatbelts

      By niZmO_Man · Posted

      bro, knowing the Japanese in  the 90's, i wouldn't be surprised if they shared components across their model lineup.
    • Kapr
      Possible swap on R34 RB20DE NEO?

      By Kapr · Posted

      Maaaan so many "little" things  i rly hope my old RB20 would be "ok" and not too bad. I try to learn what and what not do i need. I look at crossmember at it looks different...even parts numbers are different. Wiring and all that i rly do not know...yeah someone mentioned the speedo thing. On that yoke clip. I rly do not know what can and cant be done "custom" so that is why iam asking to know and not be suprised 🙂  I know what it looks like  
    • GTSBoy
      Possible swap on R34 RB20DE NEO?

      By GTSBoy · Posted

      Oh, there's also the gearbox crossmember which will probably be different between the small box and the big box, and the wiring loom will probably need to be modified, because the plugs for the switches etc, will probably be different. And I think the speedo on the small box R34s is from somwhere stupid, like the diff, possibly, so you'd need to work out what needs to be done about that (assuming it is different). I think the thing you need to realise is that the front end of that yoke is a large hollow tube with splines on the inside that mates with the splines on the box's output shaft. It is a dedicated thing - not available "aftermarket". They were made to suit that box, by the car's OEM.
×
×
  • Create New...