Jump to content
SAU Community

Need Advice Update

NISMO

By NISMO,
in V Series (V35, V36, V37 & Infiniti)

 Share

Recommended Posts

NISMO Grand Master

NISMO

Posted
  • Author
Posted
Nice choice Bobby.

Whilst your car is nice, I think the black one the better car.

Best of luck!

Get some pics up when you get the rims on it too. It will look sensational.

Thanks mate,

I think this black one is just a much better all round sports car, where as my auto was more a cruising car.

Yes I know they're the same car with the same engine, but the transmission and the brakes just do it for me.

Will definitely get some pics up once the wheels are on. I'm actually thinking of going for some TE37's now, but will wait till i get these first and see how they look.

NISMO Grand Master

NISMO

Posted
  • Author
Posted

Well, all i can say is WOW.

I sold my 05 auto on Tuesday, flew up to Sunshine coast Wed morning, picked up the 04 manual and drove back to Sydney, arrived this morning.

The, "wow" part is on how different the manuals are to the auto's. I can't believe how much quicker they feel. This of course could be just my perception but man are they great to drive.

The car seems to be in fine condition, and didn't skip a beat doing 1100k's in less than a day. The most surprising part was how much it just wants to pull and pull. In sixth gear doing 120, you can tap the accelerator and the thing throws you back and hits 160 in a blink.

Features wise, the car has full Nismo shocks/springs, Fujitsubo exhaust (i think including the Y pipe)Front lip, one of earth grounding wire kit thingys, sunroof and all the other premium goodies except for the Nav. It also has the auto fold down side mirrors when reversing which will help keep that damn gutter rash away.

It also seems to have an upgraded clutch but this is just cause I don't think the stocker would be so harsh/grippy.

All in all I am one very rapt owner of my new, slightly older 6MT V35, and really can't get over the fact at how different a car it is to the auto.

I clocked my auto a 1:21 around Wakefield so can't wait till it cools down to do a few laps in this one. I should do quite a bit better, with the better suspension, wheels, Brembo's and the manual tranny. In the auto's defence, I took it very very easy as didn't want to overheat the gearbox.

Bed time now. :-)

Blue Arrow Enthusiast

Blue Arrow

Posted
Posted
Well, all i can say is WOW.

I sold my 05 auto on Tuesday, flew up to Sunshine coast Wed morning, picked up the 04 manual and drove back to Sydney, arrived this morning.

The, "wow" part is on how different the manuals are to the auto's. I can't believe how much quicker they feel. This of course could be just my perception but man are they great to drive.

The car seems to be in fine condition, and didn't skip a beat doing 1100k's in less than a day. The most surprising part was how much it just wants to pull and pull. In sixth gear doing 120, you can tap the accelerator and the thing throws you back and hits 160 in a blink.

Features wise, the car has full Nismo shocks/springs, Fujitsubo exhaust (i think including the Y pipe)Front lip, one of earth grounding wire kit thingys, sunroof and all the other premium goodies except for the Nav. It also has the auto fold down side mirrors when reversing which will help keep that damn gutter rash away.

It also seems to have an upgraded clutch but this is just cause I don't think the stocker would be so harsh/grippy.

All in all I am one very rapt owner of my new, slightly older 6MT V35, and really can't get over the fact at how different a car it is to the auto.

I clocked my auto a 1:21 around Wakefield so can't wait till it cools down to do a few laps in this one. I should do quite a bit better, with the better suspension, wheels, Brembo's and the manual tranny. In the auto's defence, I took it very very easy as didn't want to overheat the gearbox.

Bed time now. :-)

glad you're enjoying your new ride. the manual is quite different from the auto. as for the clutch, i may be wrong but i think that's standard. takes a while to get used to but a couple of days drive in traffic will help you get used to it.

looks like a really nice car. has anyone gone over 185 kph on this thing? just wondering because the speedo seems a bit limited to 180-190 although the car certainly feels like it will go beyond that easily.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Rb26 iron block limit

      By MBS206 · Posted

      They care about emissions, and cost the most. Save weight where possible, and make manufacturing easier. Less material also let's the engine transfer heat to water quicker, and bring the engine up to temp quicker, better for emissions and getting them past their warranty period.
    • joshuaho96
      Rb26 iron block limit

      By joshuaho96 · Posted

      I was under the impression the reason why OEMs are going with solutions like relatively thin "right-sized" cylinder walls with technologies like PTWA and open deck is because they care a lot about whatever marginal knock margin benefits they get from that vs the structural rigidity benefits of a closed deck block and thicker cylinder walls. I also see some weird stuff like plastic inserts in the water jacket around the cylinders to try and equalize cylinder wall temperatures. re: the PRP blocks and heads at the end of the day it's hard to know what is and isn't going to work there, just have to see what the initial buyers say about it.
    • GTSBoy
      Rb26 iron block limit

      By GTSBoy · Posted

      Which is why I didn't mention that hardness testing, and specifically mentioned the bore and deck thickness testing. Yeah, not really. The bore temperature will be a lot more even around the top half inch or so, where the material distribution is dominated by the deck, and which is the only place where the bore surface temperature heating any gas in the cylinder is likely to have any effect on detonation. Think about it. Another inch or so down the bore, you might have a hotter spot. The gas there might get a bit hotter, then the piston rises squeezes that gas away from there at high speed and mixes it with other gas from nearby. Instant dilution of the problem. I'd be surprised if it was an issue at any time other than in racing engines or OEM dev engines being run at the ragged edge of tuning. Say what now?
    • joshuaho96
      Rb26 iron block limit

      By joshuaho96 · Posted

      https://dsportmag.com/the-tech/education/engine-tech-material-hardness-testing/ The PRP testing on block hardness I'm not sure how much it actually can be trusted. The thinner cylinder walls on RBs is a bit of a problem vs 2JZ but it really depends on the design goal. Siamesed cylinder bores like a 2JZ cause uneven cylinder wall temps too, which means a bit of distortion induced by that + the hotspot can affect knock margin. Something that actually gives me a bit of pause with the PRP block, whether super thick cylinder walls are going to keep it from being drop-in compatible on an otherwise OEM rebuild. 
    • Sleepergm
      Hks race car install

      By Sleepergm · Posted

      Yeah very valid point. I am waiting for one of the other tuners to come back from vacation so he can help me a bit when the cat is installed again. In the meantime I am going to finish up my polishing and ceramic coating that I have started myself.    N45 Dr Beasley product is highly recommended for a paint primer / polisher. Using this EXO Gtechniq also for the ceramic but next time might use the light serum before hand also. Looks great. 
×
×
  • Create New...