MRGTR911 Posted November 21, 2007 Share Posted November 21, 2007 hey guys does anyone know if engineers can engineer Filters if i had made a aluminium box around it ?? Because the RTA Is getting really tough on these boxes around them .. A workshop was telling he couldnt pass it, or is he just having me on any ideas guys ?? thanx.. Link to comment https://www.sau.com.au/forums/topic/194716-engineers/ Share on other sites More sharing options...
D3bb4 Posted November 21, 2007 Share Posted November 21, 2007 Pretty sure they can pass it. You may need an emissions test done however. I think the laws/ADR's for pod filters and such are regarding changes to emissions if intake is modified, thus you may need an emissions test. From top of my head; you're allowed ONE intake modification legally... else needs to be engineered or something? Which is modifications including putting a FMIC on, filter, anything... Call up any certified engineer and ask if they'll do it/criteria is your best bet. They always change the rules. Link to comment https://www.sau.com.au/forums/topic/194716-engineers/#findComment-3489392 Share on other sites More sharing options...
MRGTR911 Posted November 22, 2007 Author Share Posted November 22, 2007 hey mate didnt realise on my engineered Papers He had Engineered the Aluminium Box for the Filters... My question is now that i have it on a Engineers certificate can they still say anything. ??? thanx guys.. Link to comment https://www.sau.com.au/forums/topic/194716-engineers/#findComment-3490684 Share on other sites More sharing options...
Sl!m Posted November 22, 2007 Share Posted November 22, 2007 you can still get defected for the stuff the engineer has passed, just have to take the engineers papers to cop shop or whatever to clear it though Link to comment https://www.sau.com.au/forums/topic/194716-engineers/#findComment-3490720 Share on other sites More sharing options...
D3bb4 Posted November 22, 2007 Share Posted November 22, 2007 Basically; yes.... They can be pricks and there's not much you can do about it. In my case, car was engineered, so they made shit up, which i had to change before i could get a clearance blue slip. Link to comment https://www.sau.com.au/forums/topic/194716-engineers/#findComment-3491472 Share on other sites More sharing options...
MRGTR911 Posted November 22, 2007 Author Share Posted November 22, 2007 Ok thats kewl guys, I have already cleared my RTA Defect With a blue slip.. Trying to get my EPA One cleared Now. Doing a emissions tune got that under control But then its Got Rectify Noise for Filters in which case i have built the aluminium box for filters to try and seal off all noise .... I do have engineers papers for this box. Why i am very concerned about this is i cannot put the standard box back on because i am running a power FC D jetro which runs Without AFM'S So in this case if they still try and stuff me up what can i do there , The rta is not clearing my EPA Defects but there is a list of too workshops in sydney....?? I did speak to the engineer and he said it will be fine but im not too sure.. Any thoughts guys ? thanx for all the help.. Link to comment https://www.sau.com.au/forums/topic/194716-engineers/#findComment-3491539 Share on other sites More sharing options...
D3bb4 Posted November 22, 2007 Share Posted November 22, 2007 Put the stock box back on and unplug the AFM. Link to comment https://www.sau.com.au/forums/topic/194716-engineers/#findComment-3491621 Share on other sites More sharing options...
MRGTR911 Posted November 22, 2007 Author Share Posted November 22, 2007 i would have put the stock box back on i did have one but it wont fit due to all my aftermarket piping there is no way it will fit.. ill have to make some changes ti fit it in.. What a headache.... im just trying to think if there is any other ways.,. hmmmmm i appreciate your help champ... Link to comment https://www.sau.com.au/forums/topic/194716-engineers/#findComment-3491646 Share on other sites More sharing options...
D3bb4 Posted November 22, 2007 Share Posted November 22, 2007 If the car's tuned with aftermarket intake, etc. and nothing's been modded since the emissions tune... then car should pass emissions, which is the main concern - as this be where major fines can occur. EPA are seperate body, hence RTA cannot clear business with them, but can take your car off road because of them... Pretty sure emissions tests aren't all that accurate either If the only issue is noise from filters, maybe you could try putting a smaller one on? and block up your box a bit so that less air can pass through - if induction noise was the issue. Stock intakes are restricted and don't make alot of noise, thus restricting it should shut it up a bit. Link to comment https://www.sau.com.au/forums/topic/194716-engineers/#findComment-3491719 Share on other sites More sharing options...
MRGTR911 Posted November 22, 2007 Author Share Posted November 22, 2007 The issue isnt actually the noise from the filter box .. its the actual box , if you see the box i have put on now there are no gaps wat so ever its a perfect box not some dodgy back yard box... I dunno i guess ill take it and see if it passes if not ill have to work something out... Link to comment https://www.sau.com.au/forums/topic/194716-engineers/#findComment-3491988 Share on other sites More sharing options...
jeff Posted November 24, 2007 Share Posted November 24, 2007 (edited) The rta is not clearing my EPA Defects but there is a list of too workshops in sydney....?? the 2 workshops.... 1 at Granville and another at Campbelltown? I didnt go to Campbelltown so I cant make a comment about them..... However, I did go to the guy at Granville and from my experience, he's too strict and right down to the letter of the law. I have no doubt he would have still failed me if my GTR exhaust was 91db!! Luckily, the car came in at 88.6 (but he still yelled out 89.6!!) I didnt give a shit by then as the car finally passed (afer 3 tries at it) cheers jeff Edited November 24, 2007 by jeff Link to comment https://www.sau.com.au/forums/topic/194716-engineers/#findComment-3494638 Share on other sites More sharing options...
MRGTR911 Posted November 24, 2007 Author Share Posted November 24, 2007 Yeah jeff thanx for that, The guy at granville is a bit of a prick i did go there didnt get a test though as i havent done a emissions test as yet.My noise test will be fine though i do have the standard exsaust on there.. i did indeed call the guy at cambeltown i did have a chat to him Mainly about My Air filter Aluminium Box which i had somebody build for me. He told me its not up to us to decide the EPA office will decide But he was being negative about it, i do have an engineers Report for the Box but some people are saying even thats no good these days ( I READ A POST ABO BOB MADE ABOUT THE DECC I READ IT ALL :-( ).... . My question is if i do need to put the standard Air box on how will i do it . I am Running APEXI D-JETRO Which runs Without Air Flow metres ? and the standard box runs with air flow metres ? Anybody have any ideas on this ? THANX.. Link to comment https://www.sau.com.au/forums/topic/194716-engineers/#findComment-3494663 Share on other sites More sharing options...
D3bb4 Posted November 24, 2007 Share Posted November 24, 2007 As you said, it's a problem to make it fit. The afm itself shouldnt be the issue. Your box should have something to let it breathe. I'm not quite understanding what the EPA's problem is/what you've got to pass? If the noise test is fine; is it an emissions test? if so, that's exhaust emissions - nothing to do with your intake. and if your intake is modified and cleared by an engineer, they shouldnt have a leg to stand on against you. Link to comment https://www.sau.com.au/forums/topic/194716-engineers/#findComment-3494918 Share on other sites More sharing options...
MRGTR911 Posted November 24, 2007 Author Share Posted November 24, 2007 My EPA Defect Rectify Increased induction noise ( AIR FILTER ) Ensure all Emission Control Equipment Conforms with Manufacturers Specifications Large Intercooler Fitted Remove Variable Boost controller Waste Gate Actuator Arms Welded , Remove Welds These idiots got no Idea, My intercooler is actually Standard Size as a R32 GTR But its an aftermarket Firstly , My Mechanic told me The waste Gate Arms arnt welded that they dont know wats going on ( EPA ) , Boost controllers gone to get it passed . Emissions Tuning i am doing this week to get it passed. Emission test gets done at the RTA , Rest of the stuff gets cleared at a authorised workshop but there pricks. i Rang up one of them and told them i had built a filter box to get it passed which had been engineered and he told me it may not be good enough the DECC Is getting really tough.. When you hear stuff like this you get frustrated Knowing you paid a engineer to pass it and you dont know yourself if its going to help you at all.... . the engineer yes has passed it This is what he wrote : Aftermarket Front-Mounted Intercooler and Ducting Aftermarket Intake Plenum and Throttle Body A K & N Air Pod Filter Enclosed In a suitably Selected Air Box , With Cold Air Intake Shouldnt this be good enough ... Thanx for all your help george.. Link to comment https://www.sau.com.au/forums/topic/194716-engineers/#findComment-3495068 Share on other sites More sharing options...
jeff Posted November 24, 2007 Share Posted November 24, 2007 i was talking to the guy at granville about coilovers and other mods to be done on my car and if they will pass.... he said to me that if im unsure, get an engineer's certificate so i dont have any probs. so i dunno, with that, i reckon if i had engineer's certificate for my mods, he'll take that into account and pass me? if you have a lot of time in your hands before the due date, why not get it tested and see if you fail or pass before spending more money getting things changed just for the test? Link to comment https://www.sau.com.au/forums/topic/194716-engineers/#findComment-3495122 Share on other sites More sharing options...
MRGTR911 Posted November 24, 2007 Author Share Posted November 24, 2007 i was talking to the guy at granville about coilovers and other mods to be done on my car and if they will pass....he said to me that if im unsure, get an engineer's certificate so i dont have any probs. so i dunno, with that, i reckon if i had engineer's certificate for my mods, he'll take that into account and pass me? if you have a lot of time in your hands before the due date, why not get it tested and see if you fail or pass before spending more money getting things changed just for the test? Thats my plan only problem is ive run out of time ehehe.... but i will ring up the DECC TO Get a Extension... By the way that guy in Granvile is a tool hes got no idea... he had no clue with my car all he said is this wont pass this wont pass.. E.G Ive got a aftermarket Plenum hes like na that wont pass I do have it engineered Mabye because it looked very shinny he thought of it as a hazard.. Like i said HE HAD NO IDEA THAT GUY..... I Called up the guy in cambeltown he sounded like he knew what was going on... Hope for the best... Did you have you Standard Air box when you done the Test ?? Link to comment https://www.sau.com.au/forums/topic/194716-engineers/#findComment-3495244 Share on other sites More sharing options...
D3bb4 Posted November 24, 2007 Share Posted November 24, 2007 If there's a specific induction noise level, all they can do is test it and tell you if yours is louder. If yours is restricted enough, shouldnt be louder. Maybe try a deadner/rubber/foam to line the aluminium with, as metal makes more noise than rubber, etc - and it's removable. larger cooler and filter - as said before, i think the rule is only 1 intake mod; and you have 2 engineered. Engineered means that it's certified with ADR, so they can't say shit, all they can do is double check it unfortunately. same with boost controller and waste gate, etc. If it's all certified with ADR by an engineer, the EPA can check it. If it doesn't pass, engineer is liable - unless you changed it after the certificate. You're not permitted to adjust how the engine is running from inside the cabin - part of ADR. Hence adjustable boost controller is not allowed. If you messed with any emissions control systems when you modded the car... big whoopse. Other than that, just get it tested and hope for the best If they say anything, talk it over with engineer or mechanic, and post it up here, and people see what can do about it. I have a 4" pipe runnign from an exposed filter to a reducer to my turbo; got defected but they didnt even notice it Had to get a blue slip to clear all the other b/s defects, and they didnt notice it either -but i wasnt dealing with the EPA.... 'luck. Link to comment https://www.sau.com.au/forums/topic/194716-engineers/#findComment-3495325 Share on other sites More sharing options...
Taleb Tyres Posted November 24, 2007 Share Posted November 24, 2007 The guy at granville told me if i were to put my custom air box in for the test when i did mine, it would have to be engineered before hand, so if its already engineered then there shouldnt be a problem as its been previously approved to clear EPA standards? Link to comment https://www.sau.com.au/forums/topic/194716-engineers/#findComment-3495526 Share on other sites More sharing options...
jeff Posted November 24, 2007 Share Posted November 24, 2007 Did you have you Standard Air box when you done the Test ?? yeah, my car was all back to standard Link to comment https://www.sau.com.au/forums/topic/194716-engineers/#findComment-3495534 Share on other sites More sharing options...
saliya Posted November 24, 2007 Share Posted November 24, 2007 hey guys does anyone know if engineers can engineer Filters if i had made a aluminium box around it ?? Because the RTA Is getting really tough on these boxes around them .. A workshop was telling he couldnt pass it, or is he just having me onany ideas guys ?? thanx.. A workshop won't be able to pass it unless they are an Engineering Signatory (see RTA site for a list). I went through this when I had mine engineered. Some engineers just won't pass pods at all, probably because administering a drive-by noise test is harder than looking over the car then collecting $500. Who'd have thought? Pods can certainly be engineered (mine is). They need to be enclosed; and they need to not change the emissions of the vehicle to beyond the legal limits. Unless there's something wrong with your filter the tailpipe emissions should not change; but you will find that they are noisier (this is what most people get knocked back on). Basically, you need to be able to pass a drive-by noise test. Keep ringing around the engineers on the RTA list till you find one that will tell you how to pass the test; then do what they say and get your car certified... you will definitely find more than one. Regards, Saliya Link to comment https://www.sau.com.au/forums/topic/194716-engineers/#findComment-3495654 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now