Jump to content
SAU Community

Recommended Posts

Under the tarmac rally rules I must run 16 inch wheels on the R32 GTR.

So despite doing all my research and then ordering what I believe to be the best value 6 pot callipers And two full sets of pads at a cost of $3k plus air freight plus GST and duty of $550, I now have a set of 6 pots that are brand new, that retail for $5k, that cost $3610.00 that are of no use to me.

They are not a cheap chinese alloy copy but a perfect forged steel replica of the AP racing brake system and they do fit 325 to 375 mm rotors under 17 inch and larger rims.

These are not sold in OZ and are bright red. The company that manufactures them builds OEM callipers for many US, Jap and Euro cars.

I was going to use them on my 260 kilowatt rally car, but now I cant.

Includes adaptors for R33 R34 and Braided lines.

Im in Sydney and I can provide you with a tax invoice on any item.

[email protected]. or 0414 626 243 SMS and Ill ring back

Item: 6 pot brake callipers as above

Age: New

Condition: New

Price: $1,500

To Fit: any car at all but comes with adaptors for R34 and R33

Location: Sydney Northmead or Box hill

Contact: Dom [email protected]. or 0414 626 243 SMS and Ill ring back

Item: Volks 17 X 10 pro with caps and 265/40/17 tyres, again selling as I must run 16s on the GTR

Age: 2 years

Condition: wheels 9/10 tyres 5/10

Price: $1200

To Fit: (What car) They have the GTR offset so should fit all 5 bolt skylines etc

Location: Sydney Northmead or Box hill

Contact: Dom [email protected]. or 0414 626 243 SMS and Ill ring back

Item:Nismo struts and king springs

Age: about 3-5 years old

Condition: were perfect on my car but made it too low for tarmac rally use

Price: $100

To Fit: (What car) R32 GTR

Location: Sydney Northmead or Box hill

Contact: Dom [email protected]. or 0414 626 243 SMS and Ill ring back

Edited by Dominic
  • 2 weeks later...
  • 3 weeks later...
Under the tarmac rally rules I must run 16 inch wheels on the R32 GTR.

So despite doing all my research and then ordering what I believe to be the best value 6 pot callipers And two full sets of pads at a cost of $3k plus air freight plus GST and duty of $550, I now have a set of 6 pots that are brand new, that retail for $5k, that cost $3610.00 that are of no use to me.

They are not a cheap chinese alloy copy but a perfect forged steel replica of the AP racing brake system and they do fit 325 to 375 mm rotors under 17 inch and larger rims.

These are not sold in OZ and are bright red. The company that manufactures them builds OEM callipers for many US, Jap and Euro cars.

I was going to use them on my 260 kilowatt rally car, but now I cant.

Includes adaptors for R33 R34 and Braided lines.

Im in Sydney and I can provide you with a tax invoice on any item.

[email protected]. or 0414 626 243 SMS and Ill ring back

Item: 6 pot brake callipers as above

Age: New

Condition: New

Price: $1,500

To Fit: any car at all but comes with adaptors for R34 and R33

Location: Sydney Northmead or Box hill

Contact: Dom [email protected]. or 0414 626 243 SMS and Ill ring back

Item: Volks 17 X 10 pro with caps and 265/40/17 tyres, again selling as I must run 16s on the GTR

Age: 2 years

Condition: wheels 9/10 tyres 5/10

Price: $1200

To Fit: (What car) They have the GTR offset so should fit all 5 bolt skylines etc

Location: Sydney Northmead or Box hill

Contact: Dom [email protected]. or 0414 626 243 SMS and Ill ring back

Item:Nismo struts and king springs

Age: about 3-5 years old

Condition: were perfect on my car but made it too low for tarmac rally use

Price: $100

To Fit: (What car) R32 GTR

Location: Sydney Northmead or Box hill

Contact: Dom [email protected]. or 0414 626 243 SMS and Ill ring back

Under the tarmac rally rules I must run 16 inch wheels on the R32 GTR.

So despite doing all my research and then ordering what I believe to be the best value 6 pot callipers And two full sets of pads at a cost of $3k plus air freight plus GST and duty of $550, I now have a set of 6 pots that are brand new, that retail for $5k, that cost $3610.00 that are of no use to me.

They are not a cheap chinese alloy copy but a perfect forged steel replica of the AP racing brake system and they do fit 325 to 375 mm rotors under 17 inch and larger rims.

These are not sold in OZ and are bright red. The company that manufactures them builds OEM callipers for many US, Jap and Euro cars.

I was going to use them on my 260 kilowatt rally car, but now I cant.

Includes adaptors for R33 R34 and Braided lines.

Im in Sydney and I can provide you with a tax invoice on any item.

[email protected]. or 0414 626 243 SMS and Ill ring back

Item: 6 pot brake callipers as above

Age: New

Condition: New

Price: $1,500

To Fit: any car at all but comes with adaptors for R34 and R33

Location: Sydney Northmead or Box hill

Contact: Dom [email protected]. or 0414 626 243 SMS and Ill ring back

Item: Volks 17 X 10 pro with caps and 265/40/17 tyres, again selling as I must run 16s on the GTR

Age: 2 years

Condition: wheels 9/10 tyres 5/10

Price: $1200

To Fit: (What car) They have the GTR offset so should fit all 5 bolt skylines etc

Location: Sydney Northmead or Box hill

Contact: Dom [email protected]. or 0414 626 243 SMS and Ill ring back

Item:Nismo struts and king springs

Age: about 3-5 years old

Condition: were perfect on my car but made it too low for tarmac rally use

Price: $100

To Fit: (What car) R32 GTR

Location: Sydney Northmead or Box hill

Contact: Dom [email protected]. or 0414 626 243 SMS and Ill ring back

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yeah that's true, but idk. Only a 6 month lifespan seems a little short. Oh also, is there a preferred way to send images? Like any sites? I'm used to just being able to upload them lol
    • Hey, like MBS206 mentioned; I dropped off my short block and rotating assembly Monday. With a quick verification, he believes he can clear it up with just a hone and new rings but he will confirm once the rotating assembly is out. If I were you, I would either go stroker or just replace the block if it does need to be bored over to next size. Block is cheaper then forged pistons. 
    • live in the UK, and London has introduced a Low Emission Zone (LEZ) that requires individuals to pay £13 if their car doesn’t meet the required emissions standards.   The standard specifies that NOx emissions must be less than 0.08 g/km (i.e., the vehicle must meet Euro 4 standards or better, which generally results in NOx levels of around 0.08 grams per kilometer).   I reached out to Nissan UK, and they advised me to contact Nissan Japan directly. Does anyone have contact details for Nissan Japan or any certifications of conformity that show the emission details or NOx levels for the RB25DET engine?   Any guidance would be greatly appreciated.
    • these guys recommended to me and supplied custom 4 inch mufflers, couldn't be happier. They will spec a muffler to your preferred level of sound and know RB's well.  https://spmufflers.com.au/
    • Yeah this used to happen to me every year and a quick call would at least raise the agreed value back up / reduce the premium, but usually both.    That said for the first time on the renewal this year our agreed values went up or stayed the same over the fleet and the premium came down so that was a nice surprise. 
×
×
  • Create New...