[fs - Qld] Holden Vl Turbo W/ Rb25det&box (12000) Lots Of Performance Mods

[ragex]

Make:Holden

Model:commodore

MType: vl turbo

Transmission:manual

Colour:white

Location:gold coast

RWC supplied? yes

Currently registered?yes

Price:12000

Contact:0405233458

Comments / Modifications:ALOT look below

VL TURBO RB25DET& BOX / LOTS of spent on performance

1986 VL TURBO FOR SALE REGO TILL APRIL 08 RWC APPROX 120,000 KLM'S WITH THE FOLLOWING MODS:

RB25DET MOTOR SERIES 2, LATE LATE SERIES 2 ( 40TH ANEVERSY MOTOR) WITH THE R34 CAS 66,000

RB25DET GEARBOX ORIGINAL WITH MOTOR.

KKR 480 TURBO CAPABLE OF 480 HP

AFTERMARKET 480 CC INJECTORS ( STANDARD WERE 370 CC) CAN HANDLE UP TO 480HP( STILL HAVE ORIGINAL)

HIGH MOUNT EXHAUST MOUNT TURBO SITS JUST ABOVE THE ENGINE , DOES NOT TOUCH THE BONNET

EXTERNAL TIAL WASTEGATE, WITH PLUMBACK (LEGAL)

MICROTECH LT12S WITH PLUGIN LOOM, AND LAPTOP ADAPTER, AND DASH CONTROLLER ( RRP 1800) HAS BEEN PRETUNED TO SUIT MY MODS, DOES NEED FINE TUNNING.

FRONT FACING PLENUM, PIPING GOES THOUGH THE BODY OF THE CAR TO THE INTERCOOLER

BRAND NEW LIFT INTANK PUMP

BRAND NEW BOSH 044 FUEL PUMP EXTERNAL, RATED AT 700 HP

FRONT MOUNT INTERCOOLER HYBIRD TYPE LARGER COOLING TUNNELS NEW

DRIFT AIR FILTER NEW

BLOW OFF VALVE NEW

ADJUSTABLE RISING RATE FUEL PRESSURE REGULATOR WITH GUAGE NEW

FULL 3 INCH EXHAUST WITH CAT AND LARGE CANNON ON REAR LEGAL SOUND

LOWERED WITH LOW KING SPRINGS NEW BUSHES ON FRONT AND BACK

HIGHLY REGARDED NISSAN GTR BRAKES ON THE FRONT 4 PISTON CALIPERS WITH WHEEL SPACER

HAS 3 MODIFICATION PLATES FOR THE CAR

1 INCH MASTER BRAKE CYLINDER

NEW NGK SPARK PLUGS

MODIFIED TAILSHAFT TO SUIT THE RB25DET GEARBOX, HAS AN EXPENSIVE SPLIT SHAFT BEARING TO HANDLE HUGE POWER,

RECO VL TURBO LSD, WTIH DISC BRAKES

COMES WITH ALOY MAGS THAT SUIT THE CAR, 225/16 WITH BRAND NEW TREAD, 2000 KM

I HAVE 2 MONZA RACING SEATS, ONLY ONE INSTALLED

HAS A 100 MM TACO MOUNTED ON THE DASH

OPTIONAL EXTRA'S ARE I HAVE THE STANDARD COMPUTER FOR THE ENGINE R33 AND THE AIR FLOW METER (REMOVED DUE TO MICROTECH DONT NEED IT) I CAN PUT THIS BACK IN THE CAR WE CAN WORK OUT THE PRICE, BARE IN MIND THE STANDARD COMPUTER COMES WITH A Z32 AIR FLOW METER AND THE COMPUTER HAS BEEN CHIPED TO SUIT BY (ESSENTIAL NERVE IN JAPAN) STICKERS TO PROVE.

I HAVE ALOT OF SPARES INCLUDING SPARE VL TURBO TAIL LIGHTS AND TRIMMING AROUND THE BOOT, SPARE SEATS, CUSTOM SEAT FOR THE REAR NOT FITTED, SPARE FRONT GUARDS IF EVER WANT THEM FOR ANY REASON, BITS AND PEICES OF TRIMMING FOR THE DOORS, SPARE DASH CLUSTER.

THIS CAR WAS DESIGNED TO BE AIMING FOR 280-300 REAR WHEEL KW, AND BELIVE ME ITS MORE THAN CAPABLE

IT HAS THE GEAR, INJECTORS AND TURBO AND COMPUTER ARE THE BASIC LIMITS OF THE RB25DET GOING PAST 230 REAR WHEEL KW, I HAVE SETUP MORE THAN IT NEEDED.

CAR WAS DESIGNED TO BE A SLEEPER.

SINCE IT NEEDS A FINE TUNE ON THE DYNO, IM NOT SURE WHAT ITS MAKING, EST 230 ODD REAR WHEEL KW, RUNNING 12PSI

I AM LOOKING FOR MONEY OR A SWAP, A SKYLINE R33 OR A VERY GOOD SKYLINE R32 OPEN TO OTHER OPTIONS

CALL DAN FOR MORE DETAILS

0405233458 LOCATED ON THE GOLD COAST INSPECTIONS WELCOME

I WILL UPLOAD PICS ASAP, I CAN SEND VIA PHONE UNTILL THEN

DELIVERY CAN BE ORGAINISED BUY THE BUYER

Asking Price: 12000 ONO

Edited November 26, 2007 by ragex

[DRR33]

hey mate still keen on your vl

let me know what u are doin

[ragex]

hey mate still keen on your vl

let me know what u are doin

yea man give me a call 0405233458 phone was flat all day today