Jump to content
SAU Community

Recommended Posts

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

I would assume it would be slightly me responsive being ball bearing as opposed to journal (kkr items are journal bearing type are they not?) ...

also aren't the kkr series only oil cooled whereas the HKS item is water and oil cooled??

if I could have my pick I would have anything HKS put on my car over anything else on the market :D

Don't get me wrong, I love the japan stuff, but he already has the bigger KKR. A 2530 won't make the same power. It's considerably smaller. If we're talking a comparable Jap turbo you'd be looking at something the size of a 2840 or a GT30 I would think?

only making around 295rwhp

yes its laggy bout 4500rpm full boost

the car with 2530 on it i took it for a drive last nite, very good low down torque and mid range wheel spins coming on in 2nd but yeah

i dunno wot to do lol

help me!!! some ppl say 2530 2 small for rb25? im only really after 300rwhp would 2530 get me there easy enough?

well the motor has 250,000kms on it and ive been running 19psi thru it for last 6 months

so 300rwhp is pretty much the limits i think and response would be nice my thing is laggy as hell haha its a joke!

obviously you're unhappy with your current lag and you've seen the down low response of the 2530. whats holding you back?

well the motor has 250,000kms on it and ive been running 19psi thru it for last 6 months

so 300rwhp is pretty much the limits i think and response would be nice my thing is laggy as hell haha its a joke!

250000kms? wtf juz?

295RWHP@19psi, with fully boost at 4500rpm = VERY SHIT TURBO!!

For a turbo to make full boost at 4500rpm i would expect it to be pretty damn big and make at least 330rwkw (450rwhp)

Kkr's aren't shit ..

however the kkr430 would have been the better option... unless you want to use it for just drags etc. it's not going to get great response with a stock engine,

John Cane runs (drifter) runs a kkr430 on his Rb25det in his laurel and it goes awesome!

Read specs here > otomoto

Edited by RB_turbo_bitch

I had a HKS 2535 which is a little better but I have been in an RB25 with a 2530 on it and there is almost no lag! It was an awsome street car the only downfall it had was that you couldnt push it to redline you were better of shifting at 6 - 6,500 rpm...

I would do it.. it will make about 220 - 230 max but i have seen them run mid 12's in an R33.. PM Robo's on the forum, he had one.

Its not all about rwkw.... from how laggy you have said your turbo is, the 2530 would destroy the kkr setup on the street even if it was making a bit more power.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I’m doing some side developments on SR20det S13 engines, its one my hobby cars used it to compare flow capacity of some smaller size wheels. SR20det is one of another JDM legendary engines I'm sure there are plenty of SR enthusiasts on this forum, I will share results some common turbo configurations here. a quick run down of what the car is: Wide body 180sx Type X with black top engine (blue). It has: Stock bottom end Haltech 1500 ECU 5-0 motorsports trigger kit Kelford SR20DET Beehive Spring with Titanium Retainers Kelford Cams SR20DET S13 188-B 268/272 Cams G25-660 Turbocharger in T2 .64 rear housing internally gated ARP Head studs MLS head gasket 1000CC ID injectors Walbro 450L Fuel pump Front mount cooler kit JJR’s 3 inches turbo back exhaust (its too short for the 180sx it had to be extended) Pump 98 fuel Hub Dyno tune So far made 270rwkws at 22psi full boost by 4500RPM. Engine is very knock limited hence a pretty bad looking top end. From previous experiences it seems like SR20dets are happier with bigger size turbine, some thing like a GT30 would make way better top end, but on same time response is lost. It won't be a problem with S15 VCT engines. I'll be testing alternative turbine housing, turbine wheel and possibly dump pipe options for extra flow to resolve the problem and of course E85 would resolve all the issues.            
    • Awesome writeup and details. Thanks for sharing the story so far. I can relate to parts of it with my previous car and some of the issues I had to deal with.
    • Wow the colour matched hard top completely transforms the car. Are there any nice front lip options for the car or is that off the table?
    • Generally yes but for some reason I've been ruthless this time around!  I might even need to do another tip run after the way I've finally been able to hit the delete button on shit I've stepped over, stepped around and tripped over for the past 10 years!
    • I just quote the Rolling Stones. Paint it black.
×
×
  • Create New...