R32 Gtst Wiring Looms The Same As Gts4

[SXC_R33]

hey ppl i need some help i have a r32 gts4 and need to replace the loom through the whole can i have a loom from a r32 gtst what are the major differences and does any one have a gts4 one if i require 1??

gimme some help much appreciated

[heller44]

mind if I ask, why do you need to replace the loom?

[Jmaac]

Like heller said? Why bother????

[TurboX]

The R32 GTR loom would be a closer up front match I think. Why are you wanting to change it anyway?

The Nissan Australia R32 GTR Manual has wiring diagrams for GTS4 included and they are very similar.

[SXC_R33]

the loom faults so u think a gtr loom would b the sam as a gts4 lom for a r32

[TurboX]

It would be great if you gave a far greater explanation on your situation detailing all faults and symptoms!

We cant be mind readers and the more hard facts allows a greater scope of someone regcognising the problem and suggesting an easier fix.

I had loom problems also but the LAST thing I was going to do was swap it!!

I traced the faulty cables and ran replacement wires back to the ECU to solve the breaks.

Admittedly it did not solve my Knock Sensor problems but the only way I managed to do that was shorting the wires to earth thru a resistor so fooling the ECU that the Knock sensors were OK and no Fault code displayed.

[SXC_R33]

the problem with the loom is that it is burnt, no changing the wirs on that 1. its stuffed. so thats why i require a gts4 loom but i have agtst loom wanna know the major differences but i think the awd plugs required are not there on a gtst loom, can some one confirm or get back to me with the wiring diagrams for both cars

[SXC_R33]

so can anyone on here help me out in what i need???? or am asking??

[heller44]

Sorry that I can't help, I only have the gtr/gts4 wiring diagrams, not the gtst one.

Wouldn't have thought that it would be that hard to get a harness from a wreck somewhere..