Jump to content
SAU Community

Recommended Posts

Well, the turbo on my 33 died today, warmed it up got 20m down the road barely changed to second gear and bam knock knock knock :) . Didnt even hit boost (i dont hit boost until its at full operating tremperature) Guess i'll be without a car for a few weeks as i can't afford another turbo right now. It was only on 10psi too, so really, there is no safe limit, it's touch and go 82000 kms on the odo. Does anyone have ANY spare turbo for sale that would bolt on? :)

Link to comment
https://www.sau.com.au/forums/topic/19523-turbo-died-today/
Share on other sites

I've now clocked 130,000km's. I've been running 15-16psi for over a year now and have done around 30,000km's last year.

Just luck of the draw I guess.

When I had the turbo off the ceramic blades did look like they had hairline fractures but 20,000km's later and its still running.

Couldn't you manually disconnet the wastegate and jam it fully open so the exhaust well most of the exhaust gasses bypass the turbine in turn allowing you to drive it around until you get the new terd?

Link to comment
https://www.sau.com.au/forums/topic/19523-turbo-died-today/#findComment-410756
Share on other sites

If your ceramic turbo has blown, there should be nothing left of the turbine wheel and then there would be no need to do the waste gate thing u mentioned JOEL.

The easyest way i rekon to tell is to unbolt your turbo down pipe and look inside your turbo where the turbine wheel should be, if theres nothing there then it's deffenitly crapped out.

Link to comment
https://www.sau.com.au/forums/topic/19523-turbo-died-today/#findComment-412668
Share on other sites

have you had a look at the turbo area?

are you sure that you are not missing bolts of the exhaust or other flanges causing the turbo to knock against the other metals?

as mentioned.

a blown turbo wouldn't make a knocking sound..

and why would your turbo blow when you are driving off boost and at like 20 km/h

Link to comment
https://www.sau.com.au/forums/topic/19523-turbo-died-today/#findComment-413204
Share on other sites

I rang a mechanic up and asked him about it, he said it sounds like the exhaust wheel has come off and is rattling around. He said it was possible that something happened while it was cooling down in my garage the night before and stuffed up when it got running that day. I don't know too muh about internals of a turbo so i'll just take his word for it as i can't get the car anywhere to get checked out. I want a bigger turbo anyway so now's as good a time as any to get one.

Hmm anyone know all the HP limits for my stock engine?

the injectors (with good fuel pump), gearbox, how much boost before its dangerous to internals etc.

Link to comment
https://www.sau.com.au/forums/topic/19523-turbo-died-today/#findComment-413452
Share on other sites

Well i must have the strongest factory RB20 turbo in OZ.

On Monday i did a little over 35 minutes (approx 28 laps) in the one session running 0.85bar of boost at Wakefield.

The car did not sit idle by the side of the track for more then 45-60 minutes without at least a 20min blast around the track. Every 7-8 laps would have to slow for a lap to get tyre temps back so the car handled reasonable.

Other then that the car was driven all day whilst shifting at about 5,500-6,000rpm, trying to get quick some consistant laps. (im only kidding myslef, my pace was far from quick, and laps far from consistant...but i was trying);)

I was oh so proud to have clocked the magical 150,000 km mark whilst on the track. The only downer on the day is that i now have an exhaust leak, from a gasket, too many sheared manifold studs???? Will have to wait and see.

But my point, the turbo is still in one piece.:P

Link to comment
https://www.sau.com.au/forums/topic/19523-turbo-died-today/#findComment-414336
Share on other sites

hhmm...I wouldn't only call one mechanic and trust what he says, especially if what he says lines him up for a job of $200 - $300 at least. I guess the easiest way to check would be to jump back in your car, warm it up and then go for a fang - if it gets on boost, then it's working, if it says well under 0 manifold pressure then it's obviously not making boost and wheel very well may have fallen off.

Link to comment
https://www.sau.com.au/forums/topic/19523-turbo-died-today/#findComment-415193
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I haven’t taken them out of the cases yet    inside the box is this packaging which is pretty much like a massive blister pack 
    • Purchased a NC MX5 a while ago Basic suspension mods done, BC coils and Whiteline sway bars  New DBA calipers, discs and pads Added some 17 x 8 Konig Decagrams with 215/45 17 PS5's Added some typical NA bolt on's, i.e. full exhaust and intake  Added 0.5ltrs with a MZR2.5 swap, nice bump in torques  Found a detachable hard top which is locked in for a colour match with my local paint shop in Feb 25, this also includes some PDR as it has received a few love taps from parking in the local shops when in the hands of my Minister for War and Finances, me, I park nowhere near other cars and typically park on the street The little thing is awesome, I drive it everywhere, it handles like a dream whether I'm up it or just cruising  But now,  because I'm a idiot, I keep looking at turbo kits....... did I mention I'm a idiot Why is dose so appealing  All of the NA 2.5 glory, well.......until sometime in 2025 anyway....🤪  
    • I would not be surprised if you are the only person on earth that has the interest/desire to do that lol.  The Haltech base map is a really good starting point, the car will fire easily and drive very well, even on mild boost levels. To me, following your advice sounds like some sort of ancient Chinese water torcher lol (this is not an insult Josh, never change <3)
    • Those car show concepts from the 2000's and 2010's like the Floria and IDx were brilliant and should've gone ahead, at least one of them. But neither Honda nor Nissan are thinking about affordable performance any more, which is truly sad.  Even if Toyota's liquid hydrogen ICE development reaches the point where it's commercially viable and the infrastructure to support it, Honda/Nissan would have to wait until Toyota allow fee access to their patents to offer it with any smaller performance models they released to take advantage of it.  
    • A sporty manual RWD coupe with a IL4 Honda engine would only be a good thing I assume we won't see anything released for a few years though, unless informal talks and designs have been going on for a few years,  and due to the current, and future, emmisions and safety requirements, I assume anything "sporty" they would do would be at least some hybrid thingie And hopefully anything they are thinking of has nice lines, without lots of plastic and fake bits hanging off it like that horrendous FK8 that looked like it was designed by a 13 year old The other issue of course in the current market is cost, currently the type R is around $70k, a twin is around $50k Meh, I'm old and grumpy and would rather buy a older model car and waste my coin on that than buying anything currently available new  
×
×
  • Create New...