Jump to content
SAU Community

Recommended Posts

Hi everyone,

A very weird problem had just occured. i drive a r34 gt-t in automatic/tiptronic. i was driving down a slope when i started to notice that my car started spluttering. it was raining and i thought that some water had gotten into my intake so i just hit the accelerator harder. when i did that it spluttered more and started to stall. i pulled over and put it into neutral and just started to rev it out. put it back into drive and it just stalled. i tested out every gear and put it into reverse and it was fine. put it back into drive and it stalled again. gave it some revs in neutral and chucked it into drive and then stalled again.

all this resulted in me waiting 1.5 hours for a tow truck and then got charged $80 for a 5min ride :)

its at hills motorsports now and they are going to look at it tomorrow. hopefully it wont be too expensive. this is my 2nd incident regarding the rain....first was a misfiring/cant start issue.

any insight or information would be greatly appreciated!

cheers!

being auto, and you said it works ok in nuetral and reverse, my guess would be the isolator/safety switch that wont let you start the car in gear?

Im no expert, but its just an idea. maybe its got a loose connection or exposed wire somewhere

do you have an aftermarket vent to atmosphere BOV?

nope...bov in standard position

One would think its electrical, if it only occurs in the rain. Have you changed anything recently? Do you have a vented bonnet? CAI? Try checking error codes.

no vented bonnet. the mechanics seem to think thats its electrical but still not sure yet. no cai.

if it's rain related, it must be water getting in to something.

Vented Bonnet = spark plug swimming pool

fully sick pod filter in front bar = wet muff .. sorry.. I mean wet MAF.

im not so sure if its just a coincidence with the rain that my car always seems to break down on. but yea last time i had the spark plug swimming pool incident regarding it so no vented bonnet. also my pod is at the standard position where my airbox use to be.

being auto, and you said it works ok in nuetral and reverse, my guess would be the isolator/safety switch that wont let you start the car in gear?

Im no expert, but its just an idea. maybe its got a loose connection or exposed wire somewhere

no idea.. its not that it wont start in gear..u cant start autos in gear.. it just keeps stalling in gear thats all except for reverse which is weird.

thanks everyone :D

i just heard back from the mechanics. he plugged the scanner on and it didnt show up with an error code. he says that its either mechanical or theres a problem with the ecu.

just wondering if anyone else has had this problem before??

finally got a word back today after a whole week of it sitting in storage. he had told me that the computer was not giving out any power. power was going in but not coming out so he sent it away to get it tested.

does this sound right to anyone?

if the computer didnt work then the car wouldnt start right?

don't get it repaired.

buy another stock auto ecu from wreckers or these forums.

cost a fraction of repair..

but you're right.

the ecu controlls everything including the auto box.

so if it was faulty, it wouldn't run at all.

I don't know muuch about auto's, but there must be something that controls idle when in gear.

just like when the air con is on etc..

yea just got word back from mechanics couple days ago.

the 1,2 shift valve solenoid has failed. this means that when drive is selected, 1st and 2nd gear both comes on at the same time. now im just patiently waiting for the part to come in. im a little annoyed as he promised to have my car ready 2 days ago but he had ordered the wrong part for my car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...