Jump to content
SAU Community

Recommended Posts

Hey fellow RB lovers,

I didn't start the car for a week because I had to replace the crossover pipe. When I tried to start it up it was totally dead (i may of left one of the interior lights on). So I jump started it and it started up fine, I left it running for bout 2hours to charge. I then switched it off. I tried starting it again but now it just clicks when I turn the key and the internal lights flash.

I jump-start again but left if longer...bout 4hours, din work again. I repeated the process a 2-3 times, the damn battery wont charge!!! So I charged the battery using a battery charger, din work either. and also checked the fuses aswell!! What shud I do? Maybe a new battery but which one?

Please guys I need ur help!! :nyaanyaa:

Link to comment
https://www.sau.com.au/forums/topic/195568-flat-battery-please-help/
Share on other sites

To charge your battery go for a little drive. It's better than just leaving the car there idling. The higher the car's revving the more it's charging.

Best to get a new battery. If that still doesn't charge up and gets flat. It could be a problem with your alternator.

buy a new battery. go with a gell long life battery or a sealed battery. but they are a bit pricey.

cut your losses man. stop wasting time and money. do it, and move one.

WTF. NFI Y It DOUBLE POSTED.

Edited by r33cruiser

like said, buy a new battery. those fluid type leadcell bateries will die completely if you run them flat. if you dont want to have to worry about that again, spend a bit more money and get a deep cycle, sealed battery, like offered by optima, or odyssey. these can be run flat, and recharged many times, without killing the battery. people get up to 8 years life out of a battery

check the fluid in the battery mate. its only like $3 to top up.

then take it for a spin for about 20 min..

Should be fine after that

unless you have to many dead cells in the battery

he should be running a sealed battery if im not mistaken.

just get a new bat if you can afford it.

he should be running a sealed battery if im not mistaken.

just get a new bat if you can afford it.

Cheers guys! I jump started it and took it for a run. when I came back and turned off the engine...it wouldn't start again. I'm gonna take it to a mate of mines to check if it is the alternator or the battery. How much is a good battery these days?

Edited by HaZ3inSKY

it wont be the alternator mate. hook up a charge light. u will be able to see the charge output from the alternator to the batt. u will find it is in the green.

for another alternator test. turn on your headlights, and rev it. now if the lights dim and brighten really noticably it MAY be the alternator failing to put out enough charge, but fairly unlikely.

Sounds like it was just the alt. regulator and/or brushes... they trick you into buying a whole new one? Your windings would of been fine for a car so young

Your lights wont dim if you rev it. They will dim if you dont cruiser

I let my work van idle for 5hrs last weekend, jump started it then went inside to watch the final round of the v8's then went out after to do some shopping and realised it was still idling away in the backyard, ahh toyota's - love em!

stupid nrma battery is still dead tho.

news flash... if you flatten a lead-acid battery and leave it that way for more than a day s it is CACTUS. if your battery goes flat overnight and you jump start it the next day and take it for a drive you'll be ok, if you leave it for a couple of days or a week then buy a new battery. don't even try to charge the flat one, it has sulfated and is no good.

lead acid batteries will last for years if you store them fully charged but leave them dead flat and they'll die after a day or two. after that they'll never hold a charge again.

probably the damage to your alternator was caused by trying to run the car's electrical system and charge a dead flat battery at the same time. should have just bought a new battery and put it in when you realised it had been flat for a week.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @soviet_merlin Thanks mate!  Nothing too major but will hold me up for a while. I've got lymphomas to get taken off the back of my neck and the middle of my spine which always conjures scary thoughts!  It sounds worse than it is. Yeah great, conjuring more rabbit hole deepening , just what I need! 🤣  
    • I'd argue the F50 kit I got is very good value. For ~2k I got the calipers (refurbed condition), adapters, pads, brake lines, rotors, and top hats. I think you'd be pretty hard to get Evo/GTR/350z brembos + the additional hardware for similar money. Used market for a pair of front calipers alone I've seen tend to run anywhere from $1500-2000 depending on condition.    That said, something like a GTR or 350z brembo is a lot easier to adapt to the Silvia. 
    • Is there a significant price difference between the Evo/gtr/350z brembos vs the F50? Looks amazing.
    • I was actually being a tightarse at the time LOL... My OCD is tickling me into running a 2nd 8AN Teflon hose all the way down and removing the 2x OEM hardlines. My other side of my brain is telling me to run 2x hardlines front to back (also acts as a fuel cooler, so win win).
    • As I mentioned in an earlier post, I had some trouble with the Silvia's brakes dragging back in 2023. I managed to sort it out then, but the same problem came back to bite me late last year. Just take a look at the picture – I had a feeling the handbrake was acting up again, and I was right. Anyway, I'd been wanting to upgrade to bigger brakes for a while. Not that the Silvia's brakes were bad, but it was more of a "want" than a "need", you know? It was funny, though – at the time, I couldn't find any Evo Brembos, 350Z Brembos, or GTR Brembos for a decent price (of course, tons of them popped up online after I already bought my kit!). I ended up going with an F50 Brembo kit, which came with adapters, brake lines, 330mm rotors, and top hats. The F50 Brembo caliper was used in a few other cars too, like the FPV. I also decided this was the perfect opportunity to ditch the Silvia's ridiculous rear brakes and that awful handbrake (some of you were definitely right about that!). I picked up some R33 calipers and all the necessary bits – rear drums, backing plates, and new hardware to refurbish the calipers. Of course, it wouldn't be a project without a few hiccups. Turns out the brake master cylinder was playing up and basically (to put it simply) keeping the brakes engaged. I had it overhauled, and after some adjustments, everything was working again. The whole process took a while, as you can imagine. To top it off, the front right wheel bearings were shot and needed replacing too. This is a rare occasion where I'm posting an update while it's all still fresh! These pictures were taken just this afternoon.
×
×
  • Create New...