Jump to content
SAU Community

Recommended Posts

Hey Guys, just got an R32 RB20DET 1/2 cut to do a conversion into my 180sx. It arrived and is in VERY good condition!!

I already had a gearbox, will now have one spare so will be selling it all as a manual conversion package. Unless the price is right...

Below are pics of what there is... Basically I am removing engine package and brakes. Everything else is up for sale.

All Items come from this nice, clean R32GTS-t Half cut... Genuine 80,000kms – With Exception to the obvious (I.e. 180sx bits)

Stock Front bar (Average Condition) – Pickup Only - $10

r32sale01mj1.jpg

Glovebox – $20 Pickup or $40 Posted

r32sale11fl6.jpg

Instrument Cluster (Just under 80,000km) – $50 Pickup or $70 Posted

r32sale12tp0.jpg

Thermo Fan – $15 pickup or $35 Posted

r32sale30ry2.jpg

Washer Bottle – $15 Pickup or $30 Posted

r32sale31yd3.jpg

Engine Fan – $20 Pickup or $40 Posted

r32sale32ll4.jpg

Stock Intercooler (no piping) – $20 Pickup or $40 Posted

r32sale33cp8.jpg

Aircon Condenser – Pickup Only $20

r32sale34pn8.jpg

Climate Control Unit – $40 Pickup or $50 Posted

r32sale39ac3.jpg

Steering Wheel (Shithouse Condition – No Horn Button) – Free Pickup or $20 Posted

r32sale40pj1.jpg

ABS Controller Unit – $50 Pickup or $70 Posted

r32sale42un1.jpg

Front ABS Senders/Sensors – $20 Pickup or $30 Posted

r32sale43tt1.jpg

Aircon Bottle/Canister – $20 Pickup or $30 Posted

r32sale44ub8.jpg

Front Wiper Motor – $10 Pickup or $20 Posted

r32sale45cb6.jpg

Kick Panels – $10 each Pickup or $20 each Posted ($30 for the pair Posted)

r32sale46ad1.jpg

Empty Front Cut – Pickup Only – Free

r32sale47xm3.jpg

Dash (Average Condition) – Pickup Only - $10

r32sale49ak7.jpg

Aircon Compressor – Prefer Pickup - $30

r32sale51vf4.jpg

Front Sway Bar – Pickup Only - $10

r32sale52hr3.jpg

Bonnet Catch Etc – $20 Pickup or $30 Posted

r32sale53kg4.jpg

180sx Hatch Brake Light – $10 Pickup or $20 Posted

r32sale54jn5.jpg

180sx Mirrors – $30 Pickup or $50 Posted

r32sale55vy2.jpg

180sx Front Indicators – $15 Pickup or $25 Posted

r32sale56pc2.jpg

R32 Skyline Gauge Holders (One Damaged – as in Pic and Other Brand New – Purchased off Ebay and never fitted. Looks the same, may need trimming) – $30 for the pair Pickup or $50 for the pair Posted

r32sale57hb4.jpg

r32sale58qm0.jpg

r32sale29ym3.jpg

Well, as you can imagine, this has taken me quite a while!!

You are best to PM, SMS or Give me a call.

Thanks,

Todd

Ph: 0400 113 776

Edited by CATKICKER
Link to comment
https://www.sau.com.au/forums/topic/195607-r32-gts-t-halfcut-cleanout-more/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

HUGE UPDATE IN THE FIRST POST AND HERE!

Front Sway Bar – Pickup Only - $10

r32sale52hr3.jpg

Bonnet Catch Etc – $20 Pickup or $30 Posted

r32sale53kg4.jpg

180sx Hatch Brake Light – $10 Pickup or $20 Posted

r32sale54jn5.jpg

180sx Mirrors – $30 Pickup or $50 Posted

r32sale55vy2.jpg

180sx Front Indicators – $15 Pickup or $25 Posted

r32sale56pc2.jpg

R32 Skyline Gauge Holders (One Damaged – as in Pic and Other Brand New – Purchased off Ebay and never fitted. Looks the same, may need trimming) – $30 for the pair Pickup or $50 for the pair Posted

r32sale57hb4.jpg

r32sale58qm0.jpg

R32 GTS-t Manual Conversion Package

Includes:

RB25DE 5sp Gearbox (80,000kms) – Same as RB20DET

Used Factory Clutch Kit

Rubber Shift Boot

Flywheel

Clutch Pedal

Brake Pedal

Clutch Master Cylinder + Lines

Clutch Slave Cylinder

Instrument Cluster Surround

Centre Console Surround with Gear boot

All Nuts, Bolt Etc

PLEASE LET ME KNOW IF I AM MISSING ANYTHING THAT IS REQUIRED

Price $900 FIRM, Prefer Pickup but will pack and ship on pallet if buyer organises and pays freight.

WILL SELL BOX ALONE FOR $600 FIRM

r32sale60dz4.jpg

r32sale61kx7.jpg

r32sale62pv3.jpg

r32sale63uv8.jpg

r32sale64ap4.jpg

r32sale65bv1.jpg

r32sale66lj6.jpg

r32sale67ta5.jpg

Thanks,

Todd

Ph: 0400 113 776

Edited by CATKICKER
  • 2 weeks later...

hey todd, ure a bloody hard bloke to get a hold of over the phone! noticed you only had $10 on the stock bar, how much on the reo ....? (I can view the pics, but how pushed in is the bar? bit more than love taps or not?? I'll freight it up here to me, can have it picked up from ure house, Damo

Edited by madaz R33
  • 1 month later...

hey Todd, intereseted in a price for the centre surround console and gear boot cover, this prob doesnt make sense but also want the inner console piece to go with the centre surround console,

thanx Damo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • But if I smoke test 5th cylinder it’s all ok, no leaks  when I try with 2nd it’s leaking exhaust and intake, it doesn’t come from oil dip stick.    so maybe when car was running poorly, rich or sth. Spark plugs were black and covered in charcoal or sth lookalike. could potential contamination make valves not seal properly? is there also a possibility that rb’s don’t have equal performing cooling passages  meaning back of the engine will be hotter than front. Can this cause improper wear if engine was running under load for short time? Or carbon build up could just burnt from 4-6 and is still on 1-3?   I out of my head like really. Timing is as manual crank-exhaust 47, exhaust-intake 38 at this point I thinking about give it a try and make another 500-1000km and check if anything change, if not I will most likely disassemble engine head /or whole engine and send it back to rebuild. It’s killing me     
    • Thanks Duncan, I don't have a GTR these days mate. Gone soft..
    • Yeah. air pressure leakdown test is where I would be headed next here, using one's ears to determine whether it's the valves or bores/rings leaking...
    • More likely you didn't bed the rings in correctly and have glazed the bores. Running with misfires on a fresh build is somewhat of a no-no. Surely no-one "smoke tests" the combustion chamber? That's what a leakdown test is for. Smoke testing is, um, a bit of a wank at best, and only really useful for external pipework.  
    • Well, obviously that kit is not a relocation kit or anything other than just the original isolators and the like. I would suggest that it should be a matter of just bending up some flat bar to build a mount over the top of some other diff, with the flat bar held to the back of the diff by the rear hat bolts. A little welding, a little thinking about how to secure the front of this structure, maybe some different hoses in case you can't get it in just the right place.
×
×
  • Create New...