Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...
  • 1 month later...
  • 1 year later...

If you want a sleeper or stealth look - do not change anything... just go hardcore performance.

If you want to be a ricer, then different story. There's nothing wrong with a bit of exterior mods, as long as it is what you want to achieve.

Stealth and Sleeper have two diff categories with only minor differences.

Stealth is to stay under radar sort of, hence black on black, dark featues. Pick the stealth bomber for instance.

And sleeper..well im sure evryone knows what that is.

jesus... thread revival much?

do you even still have the car?

gtr front bar

black or carbon ganadors

window tints

smoked indicators

if it were me i'd get the wheels, stealth wing, ganadors, washer arms and fmic all sprayed in satin black

JDM TUFF and not gonna cost much

lol...

Sorry guys, i was just lookin for stuff to do to my car, saw this, pretty much a clone of mine.

Got GTR front bar

Gettin F1 type mirrors in Carbon

Carbon B Pillars

Windows are tinted

Indicators will be smoked.

i dont know about my stealth wing painted satin black though?

  • 3 weeks later...

best looking s1 ive seen yet.

i got the same bumper and skirts to go on mine, black rims but too bad my car is in the ghay wine red most s1's came in...

just needs a gtr style front grille and done. clean, simple and bloody tough as!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...