Wat Do U Reckon

[r32rb20detgtstQLD]

hey i got this r32 gtst coupe, rb20det, completely standard, except carbon fibre clutch.

The mods I wanna do:

Chuck a big front mount intercooler, then a full exhaust system

then I was thinking about chucking a RB25 turbo on

at the moment its boosting roughly 7PSI (slow ), but with this set up I reckon I could wind the boost up to about 13PSI, so it will go twice as fast

should cost me about $3500 or so give or take a couple hundred

what do you reckon, would this be good, and would it be safe to run 13PSI? OR would a different turbo be better?

oh and obviously add a POD filter.

[r32rb20detgtstQLD]

oh yeh and a sequential BOV, the ones that go "blarrrr CH CH CH CH " yeh

[toffy]

edit.

Edited December 2, 2007 by toffy

[Simon-S14]

easy

25 turbo

walbro pump

remapped ecu

FMIC

full 3 inch exhaust with dump

13 psi boost

=180-200 rwkw (depending on dyno and tuner )

[krzysiu]

oh yeh and a sequential BOV, the ones that go "blarrrr CH CH CH CH " yeh

Comp serge anyone?

A blow off valve doesn't make that sound

[r33cruiser]

i agree with simon 32. i boosted 12-13 psi. it becomes guttless, like hitting a brick wall. u really need an ecu that has been tuned to cope with it. but at 10psi the rb25 turbo pulls and pull.

now keep in mind i have a r33, not r32.

[r32sky_line]

Those mods should be good. Make sure you get a ecu remap, it'll make it run heaps better.

[vinnie32GTS4]

dont get an intercooler too big other wise it will be a bit laggy

[-_-StRyDeR-_-]

anyone else notice that he said it will cost him about $3500... what the!!!

r33 turbo - $350

just jap fmic kit - $400 delivered

no point gettin a tune if you havnt changed the ecu or added a piggyback. o and if your only gettin 7psi...you should you dont have a r33 acuator on it? r32 should run about 10.

[KISIN]

Comp serge anyone?

A blow off valve doesn't make that sound

My HKS does

[r32rb20detgtstQLD]

na u can get sequential BOVs (not HKS SSQV) and they give the cool compresser surge sound without the bad effects

[r32woohoo]

if you're still running the std rb20 turbo why is it only running 7psi when the actuator is set for 10psi?

[GeeTR]

na u can get sequential BOVs (not HKS SSQV) and they give the cool compresser surge sound without the bad effects