avc-r help please!!!!!!!!!!!

[makaveli]

hI GUYS, my uncle and I have recently fitted an Apexi AVC-R to my r32 gts-t. In the etc. menu I have put the correct settings to what car it is etc...

Although my problem is that its boosting more than it should. I have set it to 0.7 bar (11psi) and through testing its reached a max of 0.83 bar and an average of 0.76 bar.

I believe that the duty cycle may need to be set properly. I know that the AVC-R is wired correctly because its showing correct stats on speed, revs, boost etc...

Maybe I have left something out although I can only think its the duty cycle at this point in time.

Thanks

Mark

[MisterTwo]

dude.

did u do the gear judge settings??

[Roy]

Try turning the AVCR off, and taking the car for a drive under load. When i do this my AVCR recalls a boost of 0.83-0.87 bar.

As such it is impossible to drop the boost level to below the actuator boost level.

I have Setting A set up to run 0.85 bar but ramps onto boost a little quicker by reducing wastegate creep. It holds stable boost pressure and never goes over 0.90bar

Setting B i have set on 1.0bar but have only used it about 6 times, as my car pings a little, and unless running toluene doesnt really add any performance.

With a 25% mix of toluene the old girl has plenty more top end.

[Guest RedLineGTR]

mmmm toluene

[MisterTwo]

there is bound to be some over boost. 0.02 of a bar is nothing. i don think tt you can set the boost below the factory actuator level dude.

hope tt everything turns out well for you.

cheers