Rear Wheel Alignment

[CEF]

Hi Guys,

I'm already done with my engine/ differential install on my a31 using all r32 items. My question is, since I used the rear cradle off an r32 and it came with HICAS, what should be the correct alignment on it so that it won't wear my tires very quickly? Thanks for any help you can give.

[daisu]

R32/S13/A31 cradles all the same, use cefiro settings then. You'd want different settings if you were hitting the track.

Did you remove the hicas and associated equipment and fit a lockbar?

Edited December 5, 2007 by daisu

[CEF]

I installed the rear cradle of an r32 with the HICAS then later on, I just replaced it with a HICAS bar so it won't create movement but the tie-rod adjustments are still there. The camber bar are still the same. I just want to know what should the correct setting be used for toe since camber is still stock?

[A31cefiro]

for best wear and some decent handling

camber -0.5

toe 1mm toe in

that should do it, for drift just bring the toe out a little, and for grip, just set the camber a bit more into the negative

[CEF]

That is very helpful info. Thank you so much!!!!