Jump to content
SAU Community

Gtr Bov In R34 Gt-t......

Bass Junky

By Bass Junky,
in Engines & Forced Induction

 Share

Recommended Posts

Bass Junky Grand Master

Bass Junky

Posted
Posted

Hey guys,

Just fit up a GTR BOV to my car, all fit up no probs, actually used a section of HQ Monaro radiator pipe as the plumb back bit :cheers:

Anywho.

It now farts as the boost drops away.

Okay, imagine you are in second gear and accelerating away from a set of lights. Not fast, just normal. Car makes up to say 5 or 6 psi, and you hold you foot steady on the throttle until the acceleration drops away and the car just maintains speed.

As the car goes from accelerating to constant speed and the boost drops from 5-6 psi back to vacuum, the car lets out a fart or elongate blurt from the exhaust. It's very odd, but totally consistent. I can do it every single time.

It also does it when changing gear ON boost, but only very quickly as you are changing gear quickly.

Before I fit the BOV, I changed nothing else, so I'm pretty damn sure its the BOV.

So, had anybody had this before and what causes it, and can I make it stop?

All help appreciated.

BASS OUT

Link to comment
https://www.sau.com.au/forums/topic/196299-gtr-bov-in-r34-gt-t/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Brake pad Compound suggestion

      By GTSBoy · Posted

      Initial/early bite is a feature of.....generic pads. Things that work cold. Just put Bendix Ultimate in it. If you don't like them, it's only $3.50 wasted and an hour to change them. I've been using Intima SR, and they seem to be a good performance pad. Street friendly and able to take at least a little beating.
    • corey2
      Hello from Sydney

      By corey2 · Posted

      This is my first post after registering.. I hope i can find useful resources on this forum. Great forum. 
    • Vee37
      Brake pad Compound suggestion

      By Vee37 · Posted

      As I implied in my post, I have NO idea what the were. But in case I didn't make it clear, the way they performed was brilliant; whatever the brand was. I think it was the compound that made the difference. And if they were Bendix, then sign me up, I want another set. I did drive down mount Ousley (just outside of the Gong) a few times, and they showed no untowards performance.   Its not the low dust that I am looking for NOW. At the time I needed low dust, but now I have no issues with dust but want the initial/early bite of the pads that were used. Yeah, the early cold squeal may of been due to a missing shim or such.  And to repeat, its not the low dust I am seeking, its the initial bite of the pads and increase in bite as  the warmed up during each breaking. As soon as I let off, I don't remember the breaks being extra sticky if I used them again soon after. But I also did not test that theory.   Thanks for the recommendation, But I would prefer to choose something specifically with the behaviour I described.   I assume that they didn't use the default compound off the shelf, as we discussed the dust issue at length. And the early squeal when cold, I have seen the sound is more of an issue with some pad compounds. Mostly ceramic, which also are said to produce less dust.
    • MBS206
      🚨 Need Advice! Overcharged for Engineering Report 🚨

      By MBS206 · Posted

      Well, in 2007 he must have been charging about $1800 an hour. He only looked at the car for 5 minutes. And another 4 to write the report wrong, and another minute to correct it. Mind you, this was for a car that was: Stock engine, fmic (hole in drivers guard), all alloy intake and custom air box, 3 inch turbo back exhaust, lowered, and a set of 17" Advans (255/40/17 rear and 235/45/17 front). It was nothing crazy. The blue slipper wanted the "hole in the guard" engineered. But that was because he got the shits that I wouldn't "relocate the battery from the boot, back to the factory position in the engine bay"... In an R33 GTST...     Also for emissions, E85, and don't go wild on timing. It's amazing how the closer you get ignition timing towards max torque, the last couple of degrees really throw NOx counts right up. And for the huge increase in emissions, it's only a small increase in torque.
    • MBS206
      Neil's R33 Gts-t Build

      By MBS206 · Posted

      He'll be looking down and swearing about "the damn apprentice" for trying to convince Duncan to use percussive maintenance... 😛  
×
×
  • Create New...