Jump to content
SAU Community

Gtr Modification..


Recommended Posts

Hey ive got an R32 Gtr and i wanna do some sensible upgrades... and need some ideas..

Currently the car is stock other then coilovers, K&N Panel filter, and from what i can tell a Rein Hard exhaust.. (looks like a cat back)

so any ideas on what i could do next? open to all suggestions.. dont really wanna up the boost would like to find the power else where, im new to the turbo scene so want to learn..

also ive been looking at magazines with build segments but has anyone got any HPI mag Articles on the gtr?

Link to comment
Share on other sites

I think you've got most of the basic mods already covered...you can remove the boost restrictor olive which will give you a couple more psi but on old stock ceramic turbos may not be a wise move. Im still new to the rb26 as well but I'd say upgrade to R34 N1 turbos with some 600/700/800cc injectors, a decent size FMIC and chuck a PowerFC in her and you can safely run 260-320awkw which should keep you happy for a while :)

Cheers!

Gagz

Link to comment
Share on other sites

^^^

So dump + Front pipes.. how much am i looking at there..?

ive seen dump pipes on ebay for $170ish,... whats good? what to look for?

From Memory I paid about $1100 for HKS Dump and Front Pipes, and it will cost you about a grand to have them fitted...it is a bitch of a job!

I also added a Pair of GT2560r turbos's for I think about $2500 (fit at the same time as your Front and Dumps if you chose to replace)

Removed the boost restrictor and Made 315rwHP with a 12.6 QTR at 181kmh

Then I added a PFC ($1100 + dyno $400) upped the boost to about 18psi made 390rwHP and ran an 11.9 @ 190kmh

Link to comment
Share on other sites

Doesn't cost $1k to fit dump+fronts, my exhaust bloke has fitted xforce dumps to numerous gtr's from underneath with the turbo's still on the car. Yes it's a bitch but it can be done.

Link to comment
Share on other sites

Doesn't cost $1k to fit dump+fronts, my exhaust bloke has fitted xforce dumps to numerous gtr's from underneath with the turbo's still on the car. Yes it's a bitch but it can be done.

So you'd know how much it costs then?

If so please post a cost so as we dont fill his head with false hope, as so many of these threads tend to do.

I did not get much change from a Local performance shop from a $1000 to have my HKS / Greddy Front and dump pipes fitted as well as 2 x new Turbos, and a quick run up on the dyno :P

Link to comment
Share on other sites

I don't know the exact cost no however it is definitely under $1k to fit dumps+fronts. The reason it cost you so much is because you had your turbo's changed also which is labour intensive (8+ hrs which is still well under $1k).

Edited by benm
Link to comment
Share on other sites

oh ok, so either way though its not a simple thing to do,, fair enough..

so really if im gunna do anything more i might as well go all out with turboupgrades, powerfc, dump+pipes,

how does all this affect drivability? and reliability?

Link to comment
Share on other sites

  • 6 months later...

get your dump pipes, fornt pipes, get a set of cam gears for more zippiness and quicker boost, ofcourse a apexi fc, your not required for a bigger cooler because stock gtr coolers hold over 300kw but if you got heaps of cahs lying around go for a trust or a arc or something, i got a trust one on my gtr and is excellent, just get a good boost controller if you got standard turbos because ntog ood taking the boost retrictor off with those turbos, you said you got filters and your cat back exhaust, put it to about 1 bar of boost and you should happily see about 230-240awkw and it will be a very nice street car just with those mild mods and then later on replace yopur turbos with something better, get some injectors, cams and you will see over 300awkw with a bit off boost and it will be lethal mate

actually wont cost nothing closer to a grand to fit dumps and front pipes,

chasers motorworks are fitting my cousins hpi dump pipes and his tomei cam gears in about a week for $280 but then plus tuning so maximum will cost him $400-$500, 1k is way too much, if you really want you can change your front pipes but ofcourse not the dumps, it will cost you about 1k to fit new turbos, dump pipes, front pipes to be fitted and tuned, i cant see it being more then that, anyway just letting yous guys know,

gl with it mate and i payed $1000 for my hks dump pipes and my bee-r fornt pipes FITTED lol but that was the bloke i bought my r32 gtr off about 2 yrs ago,

cheers tony

Edited by GTRBOS
Link to comment
Share on other sites

Hey ive got an R32 Gtr and i wanna do some sensible upgrades... and need some ideas..

Currently the car is stock other then coilovers, K&N Panel filter, and from what i can tell a Rein Hard exhaust.. (looks like a cat back)

so any ideas on what i could do next? open to all suggestions.. dont really wanna up the boost would like to find the power else where, im new to the turbo scene so want to learn..

also ive been looking at magazines with build segments but has anyone got any HPI mag Articles on the gtr?

You got a budget?

1st of all get new Dump and Front pipes cause the stock R32 GTR ones a terrible. The Diametre is tiny and very restrictive.

If you don't want to boost up the turbos then exhaust is pretty much it. You can install twin air pods but I think most ppl here might say stick to your K&N Panel filter.

Keep your stock intercooler, blow off valve, don't need to upgrade these until heavy modification.

You could upgrade to a Lightweighted Flywheel, it can help with take off + upgrade to a heavy duty clutch.

Link to comment
Share on other sites

why not just change them yourself? the bolts are pricks to get to and much wd40 will be used... oil even if its bad.. but otherwise... it wont be that bad.

just make sure you have gaskets ready to go on with your new parts and your great...

provided you have stands / role on's are easier, get under the went and remove the old exhaust... that is unless you pussies cant deal with a couple of bolts... shit a t25 isnt as bad to undo as t3's... they suck... >;p

be extremely careful not to snap the bolts.. if it starts to round.. just stop.. if you dont have a good set of tools don't bother i guess is the moral.

we arent talking about gear sets inside the gear box here... it's a piece of piss to pull of an exhaust.

Link to comment
Share on other sites

fair enough..

well i recently discovered that it had a dodgy little cat converter on there restricting the shit out of it.. so thats been upgraded today.. and my mate thats doing it is Phat Pipes in Brisbane here (Excellent Reputation) anyway hes also giving me a quote to do the rest of the exhaust ie. front pipes and dumps..

but tell me whats the real difference in dumps and front pipes from brand to brand..

as ive seen so many different ones including cheap shit on ebay for $200.. all 3inch mandrel..

whats the difference?

Link to comment
Share on other sites

it all depends what kind of material it is, some stainless is really shit but if you go for the hks or sopmething they are much better but in power wise they all do the same shit but its all aboutn reliability, dunp pipes dont give a massive difference but when you change the cat back and the cat or even get it highflowed or something(bash the cat out) that makes alot of difference but it is good to change the whole exhaust while your at it, i wasnt going to change my dumps until i bought new turbos but the bloke i purchased my car off had them there to put in this other gtr but i begged him for them and he said $700 and i negotiated with him so at the end of the day he supplied my hks dumps and also i bought bee-r front pipes which are worth about $600+ and i got it all for 1k fitted, i saved at least $1k just there, but mate just pay couple hundreds more and get yourself some good dump pipes, my cousin bought hpi dumps off one of my mates for $300 but they are second hand but dont seem to have any wholes or anything so even good second hand ones bro they all do the job mate

Link to comment
Share on other sites

also having a full system how does that affect boost and or torque?

less restriction i really think mate, exhaust is probably the most important mod to change on any turbo car

Edited by GTRBOS
Link to comment
Share on other sites

does the cat really make that much difference?

cos im getting a really good one put on as we speak, cos the one that was on there he said he wouldnt even put on his corolla.. lol

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • So next year I am looking at upgrading from my VE SS bomadore ute to something more refined.  I wanted to stick with a V8 but not anything German or Australian, either a coupe or a sedan. So if I wanted anything newish that limited my options to either the Lexus RCF which I quite like. But with the price they demand and a kid on the way a 2 door coupe is probably not going to be the best idea. The next best thing would be the ISF but the newest models are 2014 and commanding over 60k and even the older 2008 models in ok condition starting around 35k is kind of bullshit. So I figured if I could not have the noise I could perhaps make do with easy power. Enter the infinity Q50 or Skyline equivalent. The price difference between the 300 and 400hp models seems a bit crazy. Right now there is 300hp Q50 one on carsales from a dealer with 61km for 27k drive away. If I wanted to get a 400hp Red or 400R car the prices seem to start at 43k From my limited research it seems that the only differences are that the 400r/Red Red runs more boost and a more aggressive tune. There are are turbine speed sensors on the turbos. Has 2 pumps for the water to air intercooler. Runs an engine oil cooler. I'm guessing that the exterior trims might look a little more sporty as well. I had a lazy look for upgrades to bridge the gap on z1motorsports They have kits that upgrade the water to air heat exchanger as well as the coolant pump which should give a non Red/400r better intercooling temps than the stock Red/400r. I added an engine oil cooler with a thermostat as well to try and make things as close as possible. Obviously the ECU is going to need a tickle. Having not done much in the way of research they also sell a ECU flashing tool with pre loaded tunes that are supposed to boost the non Red/400R by 100hp which adds 1k USD to the cost. The total cost of the parts @ the current time including shipping and taxes worked out to be $4350 AUD. Personally I would rather get the car tuned on a dyno which would probably add more cost Assuming the worst that you got a workshop to install the new parts I would guess no more than 5 hours would be required in the worst case @ 5 x $150 per hour = $750 So the total cost could be around $5100 So for easy number 5k + 27K = 32k I guess that would leave some change left over to swap out the open diff and fit a LSD Any thoughts?      
    • Right, not sure why I thought it to be a lean spike. It might be fixable with modern card-style hot film MAFs which have some design features to avoid counting reversion flow but I've never tried it myself.
    • I did not realise this, I'll contribute more and earn my stripes and retry later. 
    • I'm only going to hassle you for posting links to images. It's against my policy to click links that could be some nasty payload. Sadly, you need to make 9 more posts before you can just stick the images directly in a post, unless @PranK sees this and bends the rule for you.
    • Hello,new to the group, I bought a R32 from auction recently, wondering if anyone knows the cars history, seems to have the usual go fast bits on it, plan is to do an engine swap- add 2 extra cylinders and 1 extra turbo. https://www.dropbox.com/scl/fi/i4rjmlzubjbwjtguh6f4s/IMG20241011140744.jpg?rlkey=q0lumm251377vknbqktfwrycq&st=7scvwx4e&dl=0 https://www.dropbox.com/scl/fi/ro24qmwzlczzlfsr4y05x/Screenshot_2024-10-10-10-49-23-90_9a2f5bb2149dae94cd1e190effc09b33.jpg?rlkey=oyguh26ttshlf04ccp48odf4v&st=xloae97b&dl=0   New to forums and posting pics, if links don't work, take it easy on me, 42yrs old and I tune carburettors!!  
×
×
  • Create New...