Jump to content
SAU Community

How Often To Replace Air Filter?


Xizor
 Share

Recommended Posts

Have an apexi pod since i imported the car probably about 18 months now. Just wondeirng if i should replace it? Car has done almost 30k kms.... plus im going to throw a pfc and tomei pump in shortly and get it tuned, but yeah regardless of that as a general question... how often?

Cheers!

Link to comment
Share on other sites

just replaced my HKS air filter (on the pod) after 35k .. on the back of the packaging it says 6k-10k replace,, if i did that i would buy a filter every month and a half :)

I reckon after 25k if overly worried.. 6k seems too soon.

my 2c

-JD

Link to comment
Share on other sites

oiled foam filters normally need cleaning every 5k. the HKS oiled foam ones are known to be quite poor at filtration so i'd ditch it anyway.

nissan service schedule says 20k for air filter replacements - using the standard paper type of course.

Link to comment
Share on other sites

The "best" air filters are debatable.

Out of the reviews I've seen, Apexi, K&N & 3A Racing filters are the pop. As to which is better is debatable, and which ever you use is your personal choice.

I myself use a K&N Filter. Costs the same as an Apexi pod but at least its washable/reusable. $20-$30 bucks for a cleaning kit which will last you 5 oddish or so cleans. Beats paying $80 for a new pod every time.

As for ones who say K&N are AFM killers, its a bunch crapola. Mine has worked fine from the day I bought it and it has gone though 2 cleans already. Just don't over oil it and bobs your mothers brother. If it does get some oil on it, electrical contact cleaner is your friend.

Link to comment
Share on other sites

I have two apexi filters... I had the first one on my 34GTT RB25DET(Neo) from 11/2004 till 7/2006.. then I swapped my engine for a RB26DETT. My roommate totaled his R33 gtst so I took his used apexi filter and my used apexi intake and put them on the RB26DETT. It's now 12/2007 and I still have yet to change my filters. Every once and a while when I'm washing out the engine bay I'll take'em off and blow them out real good with an air compressor... nothing more. they still look fairly new but I'm going to replace them in a few months anyways.. I'm getting two new Apexi filters and will probably keep them for another 4 years or so. They say it lasts a lifetime... It probably does if you maintain it real good.

You can order all kinds of filters thru www.rhdjapan.com. they ship to the US and they ship fast. prices are good. If you want the Apexi filter you might have to wait because Apexi went bankrupt and their products are out of stock... gotta wait in line.

Link to comment
Share on other sites

I thought apexi going out of business was a false rumour. Or they were in trouble and things are looking fine now They certainly seem to be pumping out the PowerFC's as per normal.

I just bought secondhand Apexi pods so i too am interested in cleaning. I thought air compressor at a lowish setting would do the trick

Link to comment
Share on other sites

they are not like k&n you cant clean and reoil type thing, they are not "the last air filter you will ever buy". they are a filter that needs to be replaced when it gets clogged. if you blow it out every 6 months or so, it will not get clogged :wave: however, the more dirt on it, probably the better the air is filtered. happens with air handling units in hotels, or even at home. it gets finer and finer gaps until it is clogged and you need to clear it out or replace.

Link to comment
Share on other sites

About 2 months ago I tried to order some apexi pods from japan... but their stock is low and it would take a while. A friend of mine in japan told me that apexi got sued by nissan because of the power fc... not really sure about the details or anything. Apexi is still alive but barely. My friends auto store in japan is pumping out madd power fc's just like everyone else. I think that's one of the reasons why apexi is still hanging on.

All that was info I heard about 2 months ago... it might be different now.

Apexi makes a good filter that'll last a long time if you take care of it... just clean it out everyother or third wash and you should be more than fine. I clean mine every couple of months or so (i'm lazy) but they're still in good condition.

Link to comment
Share on other sites

oiled foam filters normally need cleaning every 5k. the HKS oiled foam ones are known to be quite poor at filtration so i'd ditch it anyway.

thats why you get the new dry 3 layer ones.. they are not oil based and last longer, i.e. you can wash them without removing something that should be there..

cheers.

i got mine from nengun

Link to comment
Share on other sites

  • 2 weeks later...

i have a blitz pod on my m35 stagea and i'm looking to get a new one. anyone no if i can just swop to an apexi filter with out buying the whole induction kit. i.e. will the apexi filter fit on the blitz intake?

Link to comment
Share on other sites

Panel filters or the Apexi power intake filters are good, both paper element filters.

The foam filters tend to break and deteriorate over time, which means half of it ends up in your engine if you don't change the elements it on a regular bases.

Apexi power intake has been known to be one of the best filtering pod filters around. Very Good quality design, and lasts a long time.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Welcome.  Glad to hear that you have gained some knowledge that has helped you. I believe the only fix for the power steer belt is an electric conversion with a Holden astra pump. If you get a chance, post pics of your car, please. 🙂
    • Just ordered those bosses, hopefully that does the trick thank you very much everyone for your replies it's really appreciated  
    • to have this type of adjustment possible with a curve as I wish, what budget (engine) should be planned?  
    • People still have Skylines? I thought they're non-existent now. 
    • Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
×
×
  • Create New...