R33 GTST ECU Wiring Diagram ?

[DJ_L3ThAL]

anyone got one ?

or better still, does anyone know of the wire for the neutral sensor for a manual R33 gtst ? like that tells the car if the car is in neutral or not in neutral (ie. in gear)

cheers

[meggala]

check my parts and info page should be there

[DJ_L3ThAL]

thanks

[Al]

Correct me if i am wrong, but manuals don't have such a sensor, from factory any.

That is why you can start your car when it is in gear and it will launch forward.

This is also why people with remote start alarms should install such a sensor.

my 2c

[Roy13]

I'm pretty sure it may be pin 44 at least that may give you a start. Yes manuals have them as it is a indication for the computer to idle up when in gear and moving!

[DJ_L3ThAL]

i nolticed that.. when im in gear but clutch is in it revs higher and as so0on as i put it in neutral and let clutch go the revs drop to normal idle

[Roy13]

Sounds like it is working ok then as mine does the same!

[Al]

OOOps, my Bad!

Learn somethin every day.

So why are some people buying these safety switches/sensors, for the gear stick, when it has one already?

Is it possible that the sensor is on the clutch and not the gear?

[DJ_L3ThAL]

because they didnt know about it my alarm guy just told me he found out about it a couple weeks ago...

[predator]

there are a couple of suspicious looking wires down near the gearbox near the centre console.. they're probably for that.. they probably hook into the ECU somewhere u just gotta find out which ones they are..

Get out your multimeter and start measuring some of the voltage on the wires near there, then try popping it into 1st and neutral.. maybe u can isolate it that way.

[Guest mort]

The neutral switch is used to tell the ecu when the car is in neutral so the ecu can switch to idkle logic, the car will idle fine without this

cheers

[meggala]

I 'm pretty sure its the switch or wires at the rear of the gear box