Jump to content
SAU Community

Recommended Posts

hey there guys

just wanted to share my experience with everyone when i finally brought my r32 gtst 10 months ago

since then what has happen to my 32 is my front driver side fender has been reverse into as it was parked at

the gym, leaving me the bill, as the driver did a hit and run, next to follow that was my car was parked at a friends house slept

overnight and came out the next morning to find that my driver side door had been reverse into, damaged was to great so

had to purchase a new door and respray the whole driver side, yet again leaving me with the bill. After getting my car back in

perfect working order i was involve in a accident today. Was driving on the highway and the driver of another car signal into my

lane without looking at his blind spot and hit my whole driver side (wat luck huh?) so now i need a new side blinker and

another respray on the driver side. l

Link to comment
https://www.sau.com.au/forums/topic/196876-is-my-r32-curse/
Share on other sites

That sucks man did the guy that hit you today have insurance at least? Hope things go better for you soon, theirs nothing worse then constant problems with your pride and joy, makes you so depressed.

Edited by Dave69001
Link to comment
https://www.sau.com.au/forums/topic/196876-is-my-r32-curse/#findComment-3522630
Share on other sites

yeh we have a cursed black car too, 350z, its had 5 good hits in 4 years, every panel has been done, none were our fault. Most recently a jeep turned into us in a corner, I stopped when he hit me but he kept driving - so he scraped the front bumper, drivers side guard, drivers door, drivers rear guard and rear bumper

Link to comment
https://www.sau.com.au/forums/topic/196876-is-my-r32-curse/#findComment-3522792
Share on other sites

yea this is pretty much what has happened to me aswell. black r32 gtst. the front bonnet it damaged and front bar, reverse lights are broken from gettin bumped in the ass, back right panal bumped, number of dents in door from retarded people that cant open doors proply.

i think i might have to get a really touchy alarm and just run out every time

Link to comment
https://www.sau.com.au/forums/topic/196876-is-my-r32-curse/#findComment-3527291
Share on other sites

Wow mine must be the only lucky black car then.

The only problem I have had is clutch went.. Stock clutch my fault because I was pushing it on the skidpans, your usually old worn parts that need to be replaced over time.. And my gearbox needs a reco but thats another story.

Ive had my car for nearly 2 years now.

Link to comment
https://www.sau.com.au/forums/topic/196876-is-my-r32-curse/#findComment-3528069
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
    • Just wanted to say thank you for your input   my man (lead mechanic by trade) and I have done a heap of work as you can imagine just to make the hot side work with the dump pipe, stupid massive intake on turbo, trying to get the waste gate on was not fun.  I’m kinda getting to the point where I don’t know if I try and make this work and not throw all this cash and time away or do I scrap the lot and start again? the Apexi I’ve got was tuned for a few slight differences:   Tomei pon cams (mine are stock neo) Turbo smart 38mm external waste gate (mines 45mm replumbed) with stainless screamer pipe  3inch turbo back exhaust with high flow cat Sard 800cc top feed injectors Sard adjustable fuel pressure reg    
    • Out here E90s are the cheapest way into a sporty-ish car because everyone knows just how expensive the repairs can get. 8-10k USD for an automatic 335i. 
×
×
  • Create New...