Jump to content
SAU Community

Recommended Posts

Hi guys, we need to ask for some parts in japan and need help to write them down in japanese...

How do we ask for an oil cooler kit with remote filter and carbon fibre aero mirrors to suit R32 GTR in japanese?

Any help appreciated, Martin.

Link to comment
https://www.sau.com.au/forums/topic/196984-simple-translation-please/
Share on other sites

depending on where your sourcing the parts from, the japs usually know very little english which helps alot. if you are to write it down. be simple and write in block capitals and dont use unessory words.

BNR32 - OIL COOLER KIT + REMOTE FILTER

BNR32 - CARBON FIBRE AERO MIRRORS. (thats pushing it, if you know brand names that you want it'll make it easier for them to piece what your saying)

HKS OIL COOLER

GANADOR MIRRORS

Most Japs try theirbest to communicate with you, even on one occasion i came across whilst trying to buy parts one got on the phone and dialed for a translator and had it on loud speaker.

Are you in Japan? Then all you need to do is find a printer and show them this, pictures are the best way. You can stuff around for ages misunderstanding each other but it does get tiring.

cooler_m4.gif

587x523-2006053000002.jpg

If you are not in Japan, the best way to get them is to ask me!

ah san ni sukyrine ganador cahbon mihro onegaishimasu.

but as laurence suggested either pics, or get the catalogue and point will be your best bet if you have zero japanese.

thanks guys, I will be in japan from jan 8 - 19 for TAS. Have been once before ( jan this year) and was lucky enough to be at Crystal Auto with a translator last time. This time we are on our own....

Hey Laurence.. I just saw that you are in Osaka... we will be there for about 3 days from 15/16 - 19 jan. I am trying to find some good tuning shops and get directions. I have a map to Trial but all in japanese.... can you suggest any others? Never been to Osaka before.

Thanks, Martin.

Here is some info... the closest train station is called Eganosho (li恵我ノ荘)on the Kintetsu - Minami Osaka line to work out how to get there just type your local station and Eganosho into this website and it will tell you which trains to take. Jorudan Train Route Finder :: CLICK ME

When you get to the train station you will have to take a Taxi to Trial, again the best way to do that is to hand the driver the address and one of the maps below. If you want to say Trial in Japanese you say something like Toe-Rye-A-Loo but that probably won't help at all. Then hand over around ¥1,070 and look at some fancy cars.

After you are at Trial you should ask them where Up Garage is and you can walk there. Also in the taxi you will pass a really cool small shop with Time Attack GT-Rs that I have never looked at.

post-662-1197567857_thumb.jpg

post-662-1197569625_thumb.jpg

Edited by Laurence

If you want to go to Signal... not that much there really

You need to go to Toyokawa station on the Osaka-Monorail (work out the route using the website above, in fact you should spend every living on that website planning your trips before you come to Japan). Then either jump in a Taxi or just walk the 1.7km to the workshop and ummm, have a look at some purple cars.

post-662-1197571233_thumb.jpg

post-662-1197571311_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha yea it's a bit of a weird setup at the moment, just wanted to make sure I sorted out any headaches before dyno day. At the moment I've changed the exhaust manifold, turbo and downpipe, 460lph fuel pump and rising rate reg as well as the previously mentioned headstuds and gasket. The nistune was already mapped for the car as it was and drove around for a few months no worries. The plan is to run flex fuel hence the big pump, which I've wired direct to the battery through a relay to avoid voltage issues.
    • Um. Was the ECU the same as the one previously there? I know R33's needed R32 GTST ECU's or other tomfoolery to run Nistune. This is such a wild setup. Most people would plumb in the turbo then not drive the car (i.e tow it to a tuner). What's actually changed since it last ran?
    • I'm a bit stuck with this one fellas, I recently decided to undertake a turbo conversion on my GTS-4, ended up pulling the motor to replace all the seals and do an mls head gasket and arp head studs while I was at it. Everything has gone according to plan, no oil or coolant leaks, compression checked out, and decided to give it a test before I book it in for a tune As it stands right now, the turbo only has oil lines plumbed so that I don't put boost into my untuned engine, and I'm using the factory GTS-T crossover pipe with a maf and poddy as a temporary intake. The car starts with relative ease and idles amazingly, however as the title suggests it really doesn't want to rev up, runs very smooth but almost feels choked out and unresponsive to the throttle, almost like it's running lean or something? I've triple checked my vacuum lines and timing with a timing light, injectors haven't been touched as of yet to avoid flooding the engine and worked perfectly beforehand, new plugs and coilpacks, I've even unbolted the cat just to see if it spontaneously collapsed, no dice The car currently has a nistune r32 gtst ecu installed so I have no way to check for fault codes. At this point I'm a bit stumped. Is this normal behaviour for a car with a turbo bolted onto the exhaust going nowhere? I'd imagine the turbo wouldn't cause this much restriction in the exhaust without the boost going through the intake. Any ideas? If necessary I can link a video of how it responds to full throttle while in neutral.  
    • Insert tab A into slot B?
    • Instructions seem simple enough to understand.....
×
×
  • Create New...