Jump to content
SAU Community

Recommended Posts

Hello this car is a custom one of a kind in Australia that i know of, its got 17 inch mags, 255 bridgestone so3 on back 235 bridgestone g3's on front

hks blow off valve, turbo, full veilside bodykit, very clean and tidy, pioneer 12 inch competition sub, response amp response splits etc cost around $1,000,

4 sped auto, 0-100km in just 6 secs!!!

RB25 DET

250hp - 195kw

1993 model, 70,000km on clock

no problems at all, serviced every 5,000km top grade oils

turbo timer fitted

2 point immobilser anti theft security

LINK TO PICS HERE!!!

Picture 1

Picture 2

Picture 3

Picture 4

tyres are 90% tread cost $1,500 just for the tyres alone.

owned for 2 years, 2nd owner in australia, 1st owner had for 4 weeks as he was the importer, bought at 33,000km

lady owner in japan.

Looking for best offers, serious bidders only please, a lot of money went into this car to modify etc

it has power of a 2 door, good looks and also can fit ya mates in back and baby in car if needed also.

Edited by vice5500
Link to comment
https://www.sau.com.au/forums/topic/197051-r33-veilsde-skyline/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I made a little more progress last night and added some E85 safe fuel tank baffle foam in behind the stock cam cover baffle plate.  It still feels really wrong shoving foam inside the engine but apparently its fine based on it pretty much being the MINES/Hi-Octane RB26 cam baffle kit and the few posts here I have found of people doing it and the lack of posts saying the foam broke down and ruined the motor... Still plan to check it frequently though lol The last step for this round of oil control modifications I plan to make is to add some -12AN fittings to the cam covers and connect them to some (already existing luckily) -12AN fittings on the sump. Basically a sudo head drain/sump breather/pressure equaliser without having to remove the motor and do the one on the rear of the head. My plan is to add them to either the tops or the sides of the cam covers at the back. unless there is a compelling reason to have them at the front on the sides which i have seen a few times though they were all on RB26 cam covers from memory so that may be due to the stock breathers being on the back and the integral baffle being different ?    
    • from an old insurance company i was with (Budget Direct) I had someone roll back into me at the lights got them to pull over. Got a picture of thier licence with address, had a dash cam video and, thier phone number. But only had 3rd party on the shitbox i was driving. insurance did nothing, cops wouldn't do anything due to the value of the damage (under $3000) so i just had to suck it up and go to U Pull It. 
    • Small Update on the Exhaust Situation A 200-cell cat was a bit too expensive for now, so I had the exhaust shop fabricate a new exhaust from the cat to the rear and an exhaust tip. I went this route to avoid cutting into the original exhaust and keep it intact. It’s essentially straight-piped, and the sound is noticeably different. The exhaust tip came with a silencer, so if it gets too loud, I can easily install it to tone things down slightly. Right now, the car bangs and pops like crazy -- which I personally love. In the future, I might add a resonator or a 200-cell cat, as niZmO_Man suggested, but for now, I’m really happy with how it turned out.  
    • And that's a massive problem, because deadshits will deadshit and give you false details. At least in these days of mobile cameraphones, it is trivial to take photos of any ID they are carrying at the same time as the 300 photo extensive documentation of the state of the vehicles that I recommend even for minor incidents. And you get photos of the person's face, any visible tatoos, etc etc, while you're at it. Then you try to avoid mentioning that you're fully capable of making explosives of various power levels and will wreck their shit if you are forced to hunt them down.
×
×
  • Create New...