Jump to content
SAU Community

Problems With My R33 Gtst

Guest tofast4you

By Guest tofast4you,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

Guest tofast4you

Guest tofast4you

Posted
Posted (edited)

hey guys, ok iv got a r33 gtst and i got a problem and i was wonderin if any one could help me, ok so here it is, i was driving home to day and i noticed that my car has lost a little bit of power and then when i got home i poped the bonnet and i could see steam or smoke coming from the back of the engine it looked like it was coming from down the bottom of the engine thou, so if any one could help me that would really great, coz i really love my car and this is really startin to worrie me, thanks guys.

ps, my email is [email protected] thanks.

Edited by tofast4you
Link to comment
https://www.sau.com.au/forums/topic/197337-problems-with-my-r33-gtst/
Share on other sites
Spunky Munky Grand Master

Spunky Munky

Posted
Posted

It sounds to me that either the exhaust piping is cracked or something's wrong with your engine... sounds serious enough to bring straight to a mechanic... if I were you, I would dropped it off asap - when you see this much smoke and losing power - I would not even try to fix it myself.

Guest tofast4you

Guest tofast4you

Posted
Posted

hey guys thanks for the advice but my car is fine now its got no steam comin from the engine and i have full power again, wierd aye lol, any way its gettin checked out on thursday when i get my timing belt changed, and it wasnt heaps of steam it was just a lil bit but i still got worried but thanks any way guys cay l8er.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • pogman
      George's R33 GTST build

      By pogman · Posted

      yeah i agree paint match stops it from standing out so much, oh that's actually really good to know i was wondering if it would help with air flow now actually having an outlet in the bonnet. Will have to focus on ducting into and out of the radiator now to make the most of it.
    • The Bogan
      George's R33 GTST build

      By The Bogan · Posted

      I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • shortyboy
      Drive By Wire Conversion options

      By shortyboy · Posted

      Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • pogman
      George's R33 GTST build

      By pogman · Posted

      small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
×
×
  • Create New...