Jump to content
SAU Community

Recommended Posts

just wiring a RB20 in to my silvia and got it nearly all done except for about 4 plugs.. They plugs are located just where the ECU sits and there is nothing to plug them into.. i was just wondering if any-1 could tell me what the plug into on a skyline :D just so we have a rough idea what they are :ermm:

1.

DSC00226.jpg

2.

DSC00224.jpg

3.

DSC00218.jpg

4. (this one is located just behind the strut tower on the passanger side) air con maybe :S ?

DSC00217.jpg

Link to comment
https://www.sau.com.au/forums/topic/197615-rb20-plugs/
Share on other sites

I assume you have started by getting all the main power feeds sorted (main engine bay plug near p/s reservoir). This is the source of all the major power feeds to the ECU and sensors. There should be 2 plugs similar to the first photographed and these are the main ECU inputs and outputs like tacho, speed sensor, consult wires, air regulator power supply, fuel pump relay control etc.

The second plug is from the windscreen wiper motor but there is also 1 wire for the fuel pump control module (on turbo RB20s). The last photo is of the windscreen wiper motor plug.

The 3rd photo is of the ECCS and Ignition coil relays.

Cheers

just wiring a RB20 in to my silvia and got it nearly all done except for about 4 plugs.. They plugs are located just where the ECU sits and there is nothing to plug them into.. i was just wondering if any-1 could tell me what the plug into on a skyline :D just so we have a rough idea what they are :ermm:

1.

DSC00226.jpg

2.

DSC00224.jpg

3.

DSC00218.jpg

4. (this one is located just behind the strut tower on the passanger side) air con maybe :S ?

DSC00217.jpg

Link to comment
https://www.sau.com.au/forums/topic/197615-rb20-plugs/#findComment-3532425
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome Alice......hope you have a bit more luck from here on! What was done in the build?  
    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
    • yeah, there's a country that recently started importing Skylines, I blame them.
×
×
  • Create New...