Jump to content
SAU Community

Recommended Posts

i think he may be talkn about those air ducks on the front bar. like this

r34cwest2.jpg

Arnt they canards? And you can get extra attachments for R34 GTR side skirts, they sit under the side skirts like the front lips do on a frontbar. They are very expensive tho. If you want them for a GTT, East Bear makes them and Power Play Imports sell them. On their site they are called 'under spoiler set' and they are $960 for the pair.

Here is what they look like, if you want them you have to buy the eastbear side skirts too, coz they wont fit on any other side skirts but theirs. Iv copied and pasted the following picture from their website

v.jpg

  • 5 months later...

Julz mate is that Stef's [D34THROW]'s V SPEC II?

if so mate i'll just call him and ask him where he got it from, he doesn't have cheap parts though... the carbon fibre brackets that allow the stock wing to sit higher set him back $1200 lol

if you want dude i'll ask him for you

Andrew :P

JSAI in sydney are making the Z-tune copy with those smaller skirts that go on the side skirt, there is a post on this in the classifieds business traders section, be prepared to take a number and wait though, im sure he is going to be swamped with orders for this GTR Z-Tune Kit for the GTT

Julz mate is that Stef's [D34THROW]'s V SPEC II?

if so mate i'll just call him and ask him where he got it from, he doesn't have cheap parts though... the carbon fibre brackets that allow the stock wing to sit higher set him back $1200 lol

if you want dude i'll ask him for you

Andrew :wub:

Yeh mate its Stef's. cheers if u can let me know. Thanks a lot mate!

Im talkin about something like this, it looks like it connects from under existing skirt...? I reckon they look sweet.

They're called Nismo Z-Tune Side Skirts and Rear Pods.

Just picked my car up yesterday after having them painted and put on.

Available from JSAI ie. www.jsai.com.au at Taren Point.

The fit was perfect with absolutely no gaps; and the owner Josh charged me less than $600 for both pods and skirts.

He has R33 items too including Nismo front lip there for about $180 I remember.

He's helpful and communicates well.

All the best,

Terry

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I am being real ocd and do not want to make amy mistakes so appreciate all help provided. I am overly cautious so asking for opinion even if i know the answer   few questions,   1.re tensioner, should spring be greased lightly?    2.tensioner has two washers , one pressure washer and other has recessed/ seat. I am going to put the recessed one facing tensioner where edges are cut out and pressure washer on top   3. my car has custom triger kit sold few years ago by guy who initially built the engine. I moved the crank gear and it moved in and out easy, only way to remove belt is to slide the crankshaft gear forward which I did. I have seen these being very tough to move , anything to do with my woodruff key?   it has a crank sensor shown in purple which I assume reads from the 12 teeth position mounted to the crankcase gear   4. timing belt doesn’t have arrow stating front or back just a arrow which I think is direction of rotation . Do you agree?   5.i figured out why my crankcase cover was worn as there was no washer installed over the crankcase cover before the harmonic balancer was put in place. It is missing, anyone knows the part number? It looks like this https://justjap.com/products/genuine-nissan-crankshaft-timing-gear-rear-plate-washer-nissan-s13-ca18-a31-r32-rb20-r33-r34-c33-c34-c35-rb25?currency=USD   https://tinypic.host/image/IMG-4535.382Zy2 https://tinypic.host/image/IMG-4537.382dSz https://tinypic.host/image/IMG-4534.382q4U  
    • CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
×
×
  • Create New...