Jump to content
SAU Community

What Events Does Sau Vic Have In The Next Few Months For A Less Experienced Driver?

some_cs_student

By some_cs_student,
in Victoria

 Share

Recommended Posts

some_cs_student Veteran

some_cs_student

Posted
  • Author
Posted
two decent bolts should be sufficient. i have 4 in each extinguisher. i would not be a fan of just 1 bolt. and just to be sure, you are using nuts and bolts, not screws? lots of people screw them in and get knocked back.

4 bolts? Where? Why? :huh:

Anyway, I'm not a fan of 1 bolt but its a street car that *rarely* sees the track (due to $$$), I'm using the rear footwell so one bolt, no nut!

The rear seats have a bolt at the bottom on each side that secures the rear seats in, I've got the Fire Extinguisher with 1 bolt (well its now an allen-key like bolt) going through the extinguisher then securing the rear seat.

I am just using one bolt in mine, with an oversized washer.

The bolt that is used to hold in the rear seat, in the footwell.

Same here, only question is have you done AASA / CAMS events with it before? Just been paranoid, last thing I want is to get knocked back after driving to Shepparton.

dezz Grand Master

dezz

Posted
Posted

You won't get knocked back at DECA. I dare say 99% of people that have them mounted in the rear footwell are only using the 1 botl (Just as I do, and I've done plenty of DECA's)

Do-Luck Veteran

Do-Luck

Posted
Posted
You won't get knocked back at DECA. I dare say 99% of people that have them mounted in the rear footwell are only using the 1 botl (Just as I do, and I've done plenty of DECA's)

But now they will proably notice, and check :thumbsup:

Belsil80 Mentor

Belsil80

Posted
Posted
4 bolts? Where? Why? :thumbsup:

Anyway, I'm not a fan of 1 bolt but its a street car that *rarely* sees the track (due to $$$), I'm using the rear footwell so one bolt, no nut!

The rear seats have a bolt at the bottom on each side that secures the rear seats in, I've got the Fire Extinguisher with 1 bolt (well its now an allen-key like bolt) going through the extinguisher then securing the rear seat.

Same here, only question is have you done AASA / CAMS events with it before? Just been paranoid, last thing I want is to get knocked back after driving to Shepparton.

4 bolts in the 4 holes of the mount into the floor pan and tunnel. why? because 4 will spread the load better and there is no chance of getting knocked back at a track day. bolting it to the seat mounts would drive me nuts if the seat is on rails as i cant see it not being in the way.

anyway, seat bolts are rather large and would do the job fine, and as al said, an oversize washer is a good idea, however as you said it could be the reason you get knocked back at a cams day. it all depends on the scrutineer you get and weather you drive a datsun ;) you will be fine at deca.

Al Grand Master

Al

Posted
Posted

I have done an offical CAMS track day with the same one bolt mounting method and did not have any issues. I know Snowy used the same method for years, when his car was more street than track, and he never had any issues (as far as I know).

Scotsman Veteran

Scotsman

Posted
Posted
Same here, only question is have you done AASA / CAMS events with it before? Just been paranoid, last thing I want is to get knocked back after driving to Shepparton.

The one bolt setup your describing is the same way most of the motorsport guys do it, and have done at CAMS L2S events for 4+ years. This is how my car / snowys car runs at Dutton Rally with two extinguishers (one each side).

Basically if a scrutineer can grab the fire extinguisher and give it a shake and it doesn't move, you pass! So one bolt can do this and get you a pass, but what ryan is saying is correct, we all 'should' mount them better, and if a scrutineer does take a closer look then they would probably be within their right to knock you back. Bottom line is you will be fine for DECA and most of the time you will pass L2S sprint days. Just make sure that I can come along and see a metal bracket fire extinguisher mounted securely enough that I can't shake it loose (move the bracket). This is what I advise my scrutineers to check for.

Ryan - They are talking about the rear seat foot well (rear seat mounting point) not the front seat, so seat rails aren't an issue.

If we were all to rock up to a C3 race meet with this mounting system, I imagine we would all be going home early thou.

Snowman Grand Master

Snowman

Posted
Posted

Or you do what I "maybe" used to do and when presenting for Scrutineering take the extinguisher out of the holder and keep it in your passenger seat. That way you can hand them the extinguisher to check the date (the main thing they want to look at) and if they ask where it is bolted just point and then they can't "shake it around" and complain. They will just look at it and say OK.

Thats what I might have done for years and years without a problem :P

(This was for the 1 bolt rear seat footwell jobby)

some_cs_student Veteran

some_cs_student

Posted
  • Author
Posted
The one bolt setup your describing is the same way most of the motorsport guys do it, and have done at CAMS L2S events for 4+ years. This is how my car / snowys car runs at Dutton Rally with two extinguishers (one each side).

<cut>

Ryan - They are talking about the rear seat foot well (rear seat mounting point) not the front seat, so seat rails aren't an issue.

<cut>

If we were all to rock up to a C3 race meet with this mounting system, I imagine we would all be going home early thou.

Understood with C3 events, thanks for the information there, just wanted to confirm that I'm not doing something stupid by using only 1 bolt, and I don't exactly intend on real racing :)

Ryan, there is 1 bolt on each side securing the bottom section of the rear seats, ie. just behind the driver/passenger seat, under the rear seats, there is a bolt that secures that bottom cushion in, that's where I'm bolting too.

Due to the way the Fire Extinguisher is designed I've drilled the top / bottom hole out, the middle section is where the hinge is so it can't be drilled there, as long as the bolt is tight it should be secure :banana:

some_cs_student Veteran

some_cs_student

Posted
  • Author
Posted
Or you do what I "maybe" used to do and when presenting for Scrutineering take the extinguisher out of the holder and keep it in your passenger seat

Well what I may or may not do may be the same thing :)

Excellent idea.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By joshuaho96 · Posted

      I mean the other day I had to walk someone through diagnosing why their timing belt was walking off the cam gears. At least one of the issues was a bent tensioner stud. Local mechanics have found runout on the CAS mechanism causing weird failures. I'm also no saint here I've documented some of the things I've had to learn the hard way. Something I discovered recently is that my CA emissions catalytic converters weren't even welded correctly to align the downpipe to the main cat and they tossed the support bracket that goes from the transfer case to the downpipe to support everything there. I spend a lot of time chasing down these decidedly unsexy problems and the net effect is it feels like I never actually get to the original objective (flex fuel, VCAM, oil control, cooling, etc).
    • r32-25t
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By r32-25t · Posted

      At times with how you make everything sound, all I imagine Americans doing when they see a gtr is standing there looking at it and bashing it with a gun like how a caveman would with a club and hoping it fixes itself 
    • joshuaho96
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By joshuaho96 · Posted

      I think this is just a product of how the US market works for this stuff. Shops are expensive and there's no real way of knowing what kind of results you're going to get, people don't really have the institutional knowledge. I have heard too much at this point to really put faith in anybody "full service" except maybe DSport and they aren't really a full service kind of shop. If you go to the right place I have no doubt they'll get it right for you. Some locals have set it up right but the cost really is nuts and even now they're still fighting issues. And you know I'm a crazy person who thinks things like twin scroll, relatively short low-mount cast headers, PCV recirc to intake, recirculating BOV, right-sized for ~400 whp, MAF load, validating all of that to a standard comparable to OEM test programs, etc are relevant. For what it's worth, multiple local owners at this point have been stuck in a perpetual cycle of blowing a motor -> getting someone to rebuild it -> some missed detail causes the bearings to wipe and spin just outside of break-in mileage or drop valves or some other catastrophe -> cycle repeats. I usually only find out about this because I'm perpetually helping random friends with diagnosing car troubles, Skyline or otherwise. The single turbo stuff if I'm honest is mostly secondary, it just doesn't seem to achieve the numbers in the ~2000-3000 rpm region that I would expect given the results I've seen here or in Motive's videos. I don't really know what we're missing here in the US to be causing this. Lots of people like to emphasize the necessity of finishing the project first and foremost, but I'm not made of money and I can't afford to be trashing a 15k+ USD engine build with any regularity. Or spending my relatively limited garage time these days unable to triangulate problems because too much was changed all at once. Also, even if it isn't a catastrophic failure I would consider spending the cost of single turbo conversion with nothing to show for it to be pretty bad. 
    • V35_Paul
      So whats the deal with the porous block VR30DDTT

      By V35_Paul · Posted

      The water pump is know to leak as well. So if the coolant is low checking that first as well as hoses. 
    • Murray_Calavera
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By Murray_Calavera · Posted

      Reading your posts Josh, sometimes I feel like I've gone in a time machine back to the 90's when everyone was doe-eyed and figuring things out for the first time.  I've lost track of how many single turbo GTR's I've seen on track that haven't burnt down lol. Everything has been figured out a long time ago. These things are at the point now where its essentially turn-key to go single turbo. 
×
×
  • Create New...