Jump to content
SAU Community

Recommended Posts

Hey guys/girls,

This my be a stupid qustion but can i potentially do any damage to my car if I drive with the silencer in the exhaust?

The car is tuned at 381rwhp @ 18psi and I'm running a Blitz Nur SpecR exhaust which is pretty loud.

Running poncams also which makes it a bit lumpy and even louder again - pretty much instant yellow sticker job if I pull up next to a cop car.

So although it drives like an excel with the silencer in, if I am just putting around not driving at all fast can anything go wrong?

Obviously i would take it out when wanting to drive it hard, but I'm just concerned I might damage something by restricting the flow so much.

Cheers,

Tay

Edited by taynewguy
Link to comment
https://www.sau.com.au/forums/topic/197836-driving-with-silencer-in-exhaust/
Share on other sites

I remeber a magazine article were they were testing a high flow cat, car had been tuned for the high flow cat, so they decided to see the diff the original cat made.

Stock cat ended up being a massive restriction causing detonation etc(high rpm end). so I see your new silencer as causing similar effects IMHO.

Ok cool, thanks for the heads up guys. I just put it on yesterday to see how much it would quieten it down and went for a sunday drive.

Didn't really give it a hard time but didn't see any excessive knocking either way.

Found out pretty quickly that it's no fun, deadly slow and with absolutely no accelleration.

Anyway, that drive didn't last long. Quickly went home ripped it off and went for a real blast up in the hills.

All smiles again :banana:

Edited by taynewguy

I got one of those.. keep it in the boot actually, it's got me off a yellow sticker before for my exhaust being too loud :laugh: I just said it'd loosened and come out and I needed a screwdriver to get it back in ;)

Driving with it thou is boring, and sounds like crap!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • yeah i agree paint match stops it from standing out so much, oh that's actually really good to know i was wondering if it would help with air flow now actually having an outlet in the bonnet. Will have to focus on ducting into and out of the radiator now to make the most of it.
    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
×
×
  • Create New...