Jump to content
SAU Community

Import A New Gtr Now

THE_350GT

By THE_350GT,
in R35 GTR

 Share

Recommended Posts

ras1983 Experienced

ras1983

Posted
Posted

Can you get compliance if Nissan Australia is going to officially import and sell the car? I was under the impression that if a car is sold through a local arm of a car manufacturer then that model couldn't be imported unless it was a personal import.

Maybe thats why the car in question is not available for street use.

SS8_Gohan Grand Master

SS8_Gohan

Posted
Posted

you can import cars not sold here as long as they are on the SEVS list (meet certain requirements, basically, power/weight ratio) and they weren't sold here AT THE SAME TIME. The Rx-7, S15 were both sold here but can also be imported as long as you choose a year that they weren't here OFFICIALLY. As we won't be getting the GTR until 2009, that leaves any 07/08 GTR eligible for import... BUT

Nissan OZ seem to be making quite sure there is not going to be a market for this car, so don't expect any "grey" GTR's to make it here for road use

Laurence Mentor

Laurence

Posted
Posted (edited)
how are they making sure theres donna be no market for it exactly?

I suspect the first Australian market one will be "sold" very soon... it is probably here already :laugh:

Well that is what I would do if I was Nissan Oz.

Edited by Laurence

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Skidmore
      Leather Gucci Bag With Receipt

      By Skidmore · Posted

      Gucci bags tend to hold their value well, so someone’s definitely going to get a nice find here.
    • Skip33
      Best Skyline ever

      By Skip33 · Posted

      @Ozdavroz Not going to get a better deal than that. Cash up front and ongoing payments. 🤑
    • MBS206
      Starting again

      By MBS206 · Posted

      I wouldn't even move it like gTSBoy is saying. I'd seriously do what Duncan is saying. Unplug the injectors, and unplug the fuel pump.  Pull the spark plugs out. Have a look in quickly with a bore scope if you want. At most, you can't spray a bit of oil into the bores so there is lubricant in there while you crank it. (Don't fill it, as it's only going to enter the exhaust, or spit at you out the spark plugs holes. Before cranking the engine on the starter, after a 5 year sit I'd probably prime the oil system manually. Easiest way to do so is to look at buying an oil filter relocation block, fit it to the engine. The pressure line going into the engine on this block you can then shove into some sort of oil pump, or put it into a bottle, with that hose going to the bottom. Fill bottle up with oil. Now seal the bottle and add a compressed air line to the top of the bottle. Feed compressed air in, about 20psi will be PLENTY. This will pump oil through the motor. Be aware, it also means it will drain back to the sump, so make sure you don't end up over filling the motor Now bolt the old oil setup back on (or fully install the remote filter system).   This way you've at least pushed fresh oil everywhere, then you're letting the motor crank to then do its own oiling. Then I'd tap the key to make sure it can start to crank, if the motor free bumps, then I'd just hit the key and let it crank. After letting it crank and seeing you can get real engine oil pressure, put new spark plugs in, reconnect the fuel system electrics, and send it.   Additionally, you can look to remove the fuel feed line to the rail, and divert it to a tank so you can get the bottom of the tank shit out, and just incase there's some crud sitting anywhere that gets passed the fuel filter (or is already ahead of it).   If fuel injection at the injectors ends up appearing to be a problem, you can dump the injectors into an ultrasonic cleaner for a quick flush clean out. Note this isn't as good as new injectors, or getting them pro cleaned and flowed    
    • Erelyes
      Jeff R32 Build

      By Erelyes · Posted

      All I can say is, that's still bloody awesome! No plans on caging it I'm guessing?
    • MBS206
      Best Skyline ever

      By MBS206 · Posted

      It seems you'd like your Skyline to go to a great home, that can keep it as a beautiful museum piece.  I feel I can provide the perfect place for it, however, I'm not sure I can justify so much money for a Skyline that has only been crashed 3 times. Due to this and market prices, would you be against me buying it for $100.00, with $60 to be paid upfront, and the remaining $40 to be paid annually in equal payments?  
×
×
  • Create New...