Jump to content
SAU Community

Recommended Posts

Guest RedLineGTR

GoFastBits Hybrid B.O.V All In Silver Colour, With Flange To Fit a R33 gtst, just remove stock bov and fit this one. In Perfect Conditon, also have receipt.

bov.jpg

Includes:

1x GFB Bov

1x Flange Adapter For R33 gtst (Assume will fit one Some others)

1x Vacuum Hose

1x Weld on Adapter (Comes with bov if not needing flange)

1x Custom Plumb Back Hose (From Bov to stock pipe)

*Have Original Receipt As Well*

PM OR EMAIL ME (LOOKING FOR MELBOURNE BUYERS)

The HYBRID Atmosphere and Plumback totally eliminates backfiring on air-flow metered cars, but will still give the great sound you want. It has a larger venting capacity than the Mach 1, and in addition to the single trumpet it also has a plumback outlet which is connected to the Factory Valve's return line. Designed for all turbo vehicles, including BIG BOOST applications.

Specs

Venting: Twin staged outlets, 1 plumb back nozzle and 1 atmosphere trumpet.

Inlet area: 506 mm2

Outlet area: 400 mm2

Flow capacity: 80.1 cfm (at 20.5 inches of water).

Piston seal/cushioning: Yes, tapered acetal.

Quad-ring piston seal: Yes.

Total length: 125 mm

Materials: 6262-T6 aluminium except the piston (brass) and seat (acetal).

Fitting method: Fits 35 mm I.D. rubber hose or 1" O.D. steel/alloy pipe. A short length of 1" pipe is included in the kit for weld on applications. Standard plumb back outlet fits 30 mm I.D. hose.

Spring adjustment: Yes, via the vacuum nipple.

Maximus boost: Factory tested to 110 psi.

PM OR EMAIL ME (LOOKING FOR MELBOURNE BUYERS)

Link to comment
https://www.sau.com.au/forums/topic/19813-gfb-hybrid-bov-kit/
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As I implied in my post, I have NO idea what the were. But in case I didn't make it clear, the way they performed was brilliant; whatever the brand was. I think it was the compound that made the difference. And if they were Bendix, then sign me up, I want another set. I did drive down mount Ousley (just outside of the Gong) a few times, and they showed no untowards performance.   Its not the low dust that I am looking for NOW. At the time I needed low dust, but now I have no issues with dust but want the initial/early bite of the pads that were used. Yeah, the early cold squeal may of been due to a missing shim or such.  And to repeat, its not the low dust I am seeking, its the initial bite of the pads and increase in bite as  the warmed up during each breaking. As soon as I let off, I don't remember the breaks being extra sticky if I used them again soon after. But I also did not test that theory.   Thanks for the recommendation, But I would prefer to choose something specifically with the behaviour I described.   I assume that they didn't use the default compound off the shelf, as we discussed the dust issue at length. And the early squeal when cold, I have seen the sound is more of an issue with some pad compounds. Mostly ceramic, which also are said to produce less dust.
    • Well, in 2007 he must have been charging about $1800 an hour. He only looked at the car for 5 minutes. And another 4 to write the report wrong, and another minute to correct it. Mind you, this was for a car that was: Stock engine, fmic (hole in drivers guard), all alloy intake and custom air box, 3 inch turbo back exhaust, lowered, and a set of 17" Advans (255/40/17 rear and 235/45/17 front). It was nothing crazy. The blue slipper wanted the "hole in the guard" engineered. But that was because he got the shits that I wouldn't "relocate the battery from the boot, back to the factory position in the engine bay"... In an R33 GTST...     Also for emissions, E85, and don't go wild on timing. It's amazing how the closer you get ignition timing towards max torque, the last couple of degrees really throw NOx counts right up. And for the huge increase in emissions, it's only a small increase in torque.
    • He'll be looking down and swearing about "the damn apprentice" for trying to convince Duncan to use percussive maintenance... 😛  
    • I swear at my GKTech ones every time I have to take them apart and replace a spherical. But I wouldn't swap them for anything else. They absolutely slay every other option, at least in terms of how they actually work. You sure you don't want to live with bearings? I mean, they don't have "ball bearings". They are rod ends and sphericals throughout. Tough as nuts, even though I have found more than one way to wear them out.
    • From when I was looking at getting the 86 engineered for the turbo, the joint said to put in a few euro 5 or 6 cats, then tune the car on a nice clean E85 tune When I was looking at a turbo for the MX5, it was basically the same thing, a couple of cats and a nice clean tune Although, it will depend on the year of the Jeep IRT emmisions standards required, and what mods are done, especially if it has a newer engine installed that requires a higher Euro
×
×
  • Create New...