... And Another Air Con Problem

[usaco]

My Heater doesn't work so I did the diagnostic test and had the following error:

31.0 and 31.5 are flashing

Does anyone now what this error means?

Thanks

[adam-__-]

Are you sure that's an error or the temperature?

Have you checked the 'main' diagnostic thread? They topic starter had a list of what the error numbers mean. The thread's in the DIY section. If I'm not too lazy, I'll post back with the thread link.

[usaco]

Are you sure that's an error or the temperature?

Have you checked the 'main' diagnostic thread? They topic starter had a list of what the error numbers mean. The thread's in the DIY section. If I'm not too lazy, I'll post back with the thread link.

Are you referring to this thread: http://www.skylinesaustralia.com/forums/R3...l&hl=aircon

Yeh I've read through that main diag thread... I use the temperature turning dial to switch between diagnostics. My unit doesn't have any heat/cold button etc as it's an r34 unit

2 is shown as 20 (sometimes flashes 25 but apparently that's ok)

3 is flashing 31.0 and 31.5 (I think it's got something to do with air mix door actuator??!!!)

If it is the air mix actuator, does anyone know where it's located (possibly a photo of it would be awesome)

[adam-__-]

Yeah, that's the thread I was talking about. Seeing that your car's an R34, I can't help you there. I've got a 32 and the technology would be worlds apart.

I'll let one of the R34 members answer this question for you.

Cheers

[usaco]

Cool... Thanks.