Jump to content
SAU Community

R33 Fire Extinguisher Install

evil_weevil

By evil_weevil,
in General Maintenance

 Share

Recommended Posts

evil_weevil Grand Master

evil_weevil

Posted
Posted

For this guys who are looking to install a fire extinguiser for track days,

read ahead!

Make sure you have a CAMS approved Fire extinguisher and it is in its current date/charged etc

All you'll need is a 12mm socket to undo the bolt. And a drill to drill the hole in the metal extinguisher bracket to make the hole slightly bigger.

After doing a few searches and talking with Duncan and Sam916 - this was prob the best place we could think of, its still in reach from drivers seat while seat belted in (which is a CAMS requirement)

I have my back seat out, so I dont know how it goes with backseat in...

2174033_17_full.jpg

Thats the bolt on the passenger side of the back seat. Just get the 12mm socket, take her out!

Drill the hole (note - I cannot remember size, however best to start small and if the bolt still doesnt fit, go to a bigger drill)

2174033_19_full.jpg

You need the nozzle/top of the extinguisher facing towards the left of the car. So make sure you drill into the top hole in the metal bracket.

2174033_14_full.jpg

Tats it fitted!

Do the bolt up tight. We did it up tight and tried to budge it, sits in quite secure.

2174033_16_full.jpg

Cheers,

Chris

Link to comment
https://www.sau.com.au/forums/topic/198338-r33-fire-extinguisher-install/
Share on other sites
Victory Mentor

Victory

Posted
Posted

Chris this is exactly what I was thinking of doing for my cars with the exception that I was going to place the extinguisher behind the drivers seat as my rear passangers seat gets used.

Looks good in practice and does not involve drilling additional holes in the car - now I know what I will be doing over the Xmas break.

moobaque Rising Star

moobaque

Posted
Posted

Have you done a track day since you've done this install?

Im sure the scrutineers prolly never check how safely your fire extinguisher is mounted in your car but i highly doubt thats exceptable.

There is to much wieght hanging on a single point of attachment. under a collision i can see the weight of that extinguisher bending the sheeeet out of those wobly alloy brackets. Worse case senario it snaps all together.

The brackets require both mouting points to be used to keep its integrity. and 2 points of attachent almost means safety if one fails.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • djr81
      R32 update from 1990's spec.

      By djr81 · Posted

      The plan is to get it out of the shed. The reality may fall some way short. But hope is as cheap as despair as they say. Will go a wide band I think. The coils are ok so maybe I’ll miss the $1500 on the R35 coils etc. Im still on the fence about a trigger kit. The HKS one looks nice ($1k) - not sure how it works with the Link or if Link prefer something else. Oil pressure is fine so I’m not that concerned there. Fuel pressure I’ll have a think about. The IAT got changed for the Link anyway as the old RB26 ones were really slow reacting and pretty poor. The Power FC just worked. Wasn’t terribly refined but it just worked. Probably made a mistake replacing it really. E85 isn’t available locally - it is 100+ kms away which puts it in the too hard basket. Lastly I understand Tunecorp in Perth are pretty good so was probably going there.   As for turbos is there are new age -5 drop in replacement? Turbos have come a long way in 20 years, everyone is big single which is fair enough but I prefer the old school complication of twins. Wasn’t chasing more power (well, not much more) but more efficiency would be ok.
    • Duncan
      Replica built of first Gibson R32 chassis

      By Duncan · Posted

      I thought I'd share this....the shell is non genuine but they found or built a lot of the genuine parts. Plus, it is by far the best colour scheme of those years, the winfield once was particularly shit https://www.v8sleuth.com.au/written-off-inaugural-godzilla-recreated/
    • Duncan
      Beers and skylines Fatz style

      By Duncan · Posted

      Good work Pete and glad the car held up well....been a while since I've seen you try properly
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Just quick update, I've had tech issues and so a backlog on life stuff....I will pull lap times from the video and data from the ECU logs to do a proper update. But basically, in order of importance: 1. The car was excellent fun on the track, really felt a lot like the good old days. And nice to have AC while waiting 2. Coolant got really hot; again I need to pull and analyse the logs but the standard system is not up to tracking at 30o+ days, once the system was heat soaked after the first 2x15min sessions I could only do 3 laps before it got 110+ and I had to cool down. If I can't improve that it is a deal breaker 3 Oil temps were fine all day, noting it was short sessions due to 2. I think it will likely need work 4 Biggest surprise AT temps were fine, never went over 100, I would have been OK with 120 before I was too concerned. The auto sucks compared to a manual (of course) but it is faster to launch and I just need to downshift it manually before hitting the throttle, then it was OK. When I post the vids you'll hear it telling me off (beeping) for trying to downshift too early (it needs about 3500 before it will downshift, depending on gear a little but we are mostly talking 3/2 and 4/3) 5 A052s were not great which hurt the lap times, but I will be constrained in what I can get in good tyres that fit the wheel wells. These were small for a heavy car at 235/45/18. In theory I can fit 9.5 on front and 10.5 rear (so not square) but I still need 670mm+ high tyres in good brands. 6 Standard shocks/springs/roll bar are too soft for track work (of course), but that was always on the list. And happily, no white on the mat, despite having a teenaged passenger, extinguisher mount was fine. Also, it was nice to have Wakefield Park back in action  . Because the car was so quiet it is eligible for Green Day, which I thought was a band but is apparently a series of cheaper practice days they run with a lower sound limit, that is a smart idea.  
    • Duncan
      R32 update from 1990's spec.

      By Duncan · Posted

      Great to hear you are bringing it out of the shed again. Unless you have specific issues I'd just add the wideband, get a good tune and enjoy it. Certainly no point changing coils etc if they are working. If would add fuel pressure and e85 sensor if you are doing a general update but not if it runs OK and you are just getting it back on track. The other thing is smaller, modern twins, -5 are OK for motorsport but pretty laggy and old tech for street use (of course, if performance is the priority a modern single with twin scroll manifold etc is the go but not cheap). The final thing worth considering is switching to an ethrottle if drivability is still an issue, it should make things a lot simpler and smoother
×
×
  • Create New...