Jump to content
SAU Community

Recommended Posts

Hey again,

Buying a 33 GTR and my choices so far is a Standered car but perfect condition inside and out and a bit more expensive, or a slightly moddied car but rough inside and out but a bit cheaper making 260kws.

Just wondering though, what sort of kws do stock as a rock GTR 33s put out?

And if i buy

Power fc

Boost controller

FMIC

Full exhaust

What would that up it to roughly?

That would be a huge help

Link to comment
https://www.sau.com.au/forums/topic/198416-r33-gtr-power-output/
Share on other sites

I don't know why we need another thread on this.

Expect around 250rwkw on standard turbos with a Power FC, small boost increase and an exhaust system.

A bone stock R33 GTR puts out around 160awkw

Upgrading the Intercooler will be a complete waste of time and money at this power level on a GTR.

My advice, buy the dearer and better condition/unmolested car to start with.

I don't know why we need another thread on this.

Expect around 250rwkw on standard turbos with a Power FC, small boost increase and an exhaust system.

A bone stock R33 GTR puts out around 160awkw

Upgrading the Intercooler will be a complete waste of time and money at this power level on a GTR.

My advice, buy the dearer and better condition/unmolested car to start with.

THAT ALL! 160???

but with $2000 it should hit 250kws?

Will the standered clutch, fuel pump and injectors still be ok?

THAT ALL! 160???

but with $2000 it should hit 250kws?

Will the standered clutch, fuel pump and injectors still be ok?

How long is a piece of string? If the standard pump and injectors are in good working order, they will be fine.

As for the clutch, be prepared to replace it.

Where did you pull the figure of $2000 from exactly? Thats a tad unrealistic for the mods list you mentioned.

How long is a piece of string? If the standard pump and injectors are in good working order, they will be fine.

As for the clutch, be prepared to replace it.

Where did you pull the figure of $2000 from exactly? Thats a tad unrealistic for the mods list you mentioned.

Excellent thanks mate...

What sort of clutch would be enough to hold around the 275kw mark mayb 300 eventually as i may replace turbos?

price?

And if i buy

Power fc

Boost controller

FMIC

Full exhaust

THAT ALL! 160???

but with $2000 it should hit 250kws?

Will the standered clutch, fuel pump and injectors still be ok?

$2000 for those mods? you might want to research that.

I see.

Power fc - $1500

Boost controller - $500

FMIC - waste if time the stocker is good for 300rwkw

Full exhaust - $1500 (2 dump pipes, front pipes, cat, catback

Add clutch - $800+

Add install - $500

add tune - $800

$2000 for those mods? you might want to research that.

I see.

Power fc - $1500

Boost controller - $500

FMIC - waste if time the stocker is good for 300rwkw

Full exhaust - $1500 (2 dump pipes, front pipes, cat, catback

Add clutch - $800+

Add install - $500

add tune - $800

yer your right.... was just talking about buying boost controller and power fc... i was under the impression that power fcs for GTRs were a bit cheaper

APEXI no longer make POWER FC.

they are ALL expensive.

and the boost controller for the PFC is not built in so to speak.

you still have to buy the device that will do the boost controlling.

it attached to the power fc which then allows you to make changes to boost via the hand controller.

APEXI no longer make POWER FC.

they are ALL expensive.

and the boost controller for the PFC is not built in so to speak.

you still have to buy the device that will do the boost controlling.

it attached to the power fc which then allows you to make changes to boost via the hand controller.

ahhh so you have to get the apexi boost controller to make it work with the power FC?

Picked up a GTR Power FC yesterday brand new $700. But normally they average $800.

As for boost control i think u can just remove the restrictor in the vacuum line....maybe do some research on that. The money u save on a boost controller u can put towards tuning.

where was that from??

Adam mate, use the search button dude. People have taken the time to post all this info before. So do them some justice by reading it.

You've been here long enough to know where it is, and how to use it :)

GTR PowerFC's are still sold at ANY importer or parts distributor. GTST is wrong with his info.

For power output, check the Dyno sticky thread.

There are a dozen results, if not more for a basic modded GTR. They are not going to be magically different to yours.

Cheers.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I mean it's probably likely that people overestimate their skills in dialling in a setup and noticing the changes. I had SK shocks and springs, and added heavier springs and got them revalved by Sydney Shocks to suit based upon what I told them I wanted the car to handle like. I got back a completely different feeling set of shocks, which probably (?) feel great on track but holy hell are they rough on tram tracks and the like. The shock dyno actually looks pretty similar to Shockworks (from what I can surmise from a screenshot of a youtube video - and my dyno printout...) Truth be told I doubt I'd be any faster or slower with either setup, or camber/castor combination. I also had whiteline eccentric castor bushes up front of my R34. I removed them and put in poly non-adjustable ones to soothe my OCD (nobody ever set the castor the same side to side, and it'd be near impossible to do) and be happy the wheel is centered in the well now for clearance reasons. Yes I wanted it to move 1mm 'back' :p I've effectively set my castor back to stock, negating all the benefits of that which is supposedly massive. I've probably also altered toe and camber in a negative (detrimental) way. I can't tell any difference steering the car.
    • You reckon? I have to disagree. Notwithstanding that at some point we may all be forced to do this to our cars if we want to keep driving them, there is absolutely nothing about an electric-converted-previously-IC-car that is ever good. EVs that are built by OEMs on platforms that were originally IC already suck, let alone the shitty outcomes that result from doing it as a retro to something that was actually built as an IC car. This is because the platform really needs to be designed to house the battery in a useful place (ie, down as low as possible) and the motors are properly located relative to the wheels that they have to drive. Converted platforms already suck at this. But when you try to shove sufficient battery capacity into a previously IC car, you can't put it down on/in the floor, because that space doesn't exist. You can't find enough space where the fuel tank used to be (if it is an inboard fuel tank) and you don't want to hang it out behind the rear axle line if you had a rear fuel tank. And there's not enough space in the tunnel if you still want to use it for anything remotely like what it was originally used for. The engine bay is too big for a motor, and you'd really prefer that the motor for the rear wheels wasn't in the front engine bay anyway. And there's not enough room where the diff was for a proper man-sized E motor. And then.... there is the complete lack of soul and emotion that is provided by EVs. There are some cracking restomods out there. Like the Alfaholics GTA thingo. But it is petrol powered. Look at the alternative EV version of a GTA restomod by Totem. it is jaw droppingly beautiful. But by all reports is is objectively awful to drive, despite having 600 HP or something, simply because there is nothing there. It sounds like a sewing machine or a leaf blower. It should scream and wail and make the hairs on your neck stand up. Oh, and it's 1500 bloody kg in a car that was <900kg when new. GTRs are heavy enough as it is without pushing them up to 2tonnes worth of pork.
    • https://www.dezeen.com/2025/01/06/nissan-electric-r32-skyline-gt-r-godzilla-sports-car/   I reckon this is pretty cool. Lots of other Resto mods have turned to ev power.
    • hahaha @joshuaho96 the most action it gets is when I have to drive from West to SE VIC to meet the fam. Even then, it;s on highway cruising speeds
    • don't know anyone in this thread, but i just found it, read the entire thing in a few hours, realized greg is still posting progress, and just have to say, this is awesome. it looks awesome. 100% right about the Uras kit making it a pain to get on hoists...have the same kit on my 34 and it takes six 2x4s and race ramps to do it without taking parts off. this reminds me exactly of this thread. https://grassrootsmotorsports.com/forum/build-projects-and-project-cars/r63-amg-the-unicorn-of-my-destruction/110824/page8/
×
×
  • Create New...