R33 Rb25 Differences With Neo R34

[GreeceS13]

The following R33 parts...

Greddy intake fit to neo?

Clutch for fits to neo?

Forged pistons for r33 fits to neo?

Exhaust manifold fits to neo?

Nissan OEM gasket kit fits to neo?

That's all

[Adriano]

The following R33 parts...

Greddy intake fit to neo?Yes

Clutch for fits to neo?No, same as late 32/33 gtr

Forged pistons for r33 fits to neo?No

Exhaust manifold fits to neo?yes

Nissan OEM gasket kit fits to neo?should

That's all

Edited December 21, 2007 by Adriano

[GeeTR]

The following R33 parts...

Greddy intake fit to neo?

Clutch for fits to neo?

Forged pistons for r33 fits to neo?

Exhaust manifold fits to neo?

Nissan OEM gasket kit fits to neo?

That's all

[E_Lu-SHuN]

Greddy intake manifold needs to be modified..not a perfect fit

[STATUS]

Greddy intake manifold needs to be modified..not a perfect fit

bolts straight up perfectley with no mods, wiring and shite needs mods.

http://www.skylinesaustralia.com/forums/In...eddy+plenum+r34

http://www.skylinesaustralia.com/forums/Gr...=plenum+r34+gtt

[E_Lu-SHuN]

interesting read.

thanks for that URAS .mite look into it now

[R34GTFOUR]

clutches are different

the gtt uses pull type

the gtst uses push type

[GreeceS13]

NEO has cable throtle body like R33 or wire (as new technology cars) ?

Can I put Q45 throttle body ?? (in greddy intake manifold)

[GreeceS13]

And another question...

I would like to put wisecos because they are cheap..

What compression I will have with stock headgasket with

R33 RB25 pistons?

RB26 pistons?

Here there are the spec of the pistons... I don't know how to calculate the ratio so anyone how knows please let me know!

http://www.wiseco.com/PDFs/Catalogs/SC08/N...aruToyotaVW.pdf

[Adriano]

And another question...

I would like to put wisecos because they are cheap..

What compression I will have with stock headgasket with

R33 RB25 pistons?

RB26 pistons?

Here there are the spec of the pistons... I don't know how to calculate the ratio so anyone how knows please let me know!

http://www.wiseco.com/PDFs/Catalogs/SC08/N...aruToyotaVW.pdf

Neither are appropriate, you will end up with >10:1 comp.

R34 neo throttle body is basically the same as r33 except it has the TCS butterfly on the front, no probs fitting a Q45 one to the greddy. IMO save the $1300 for the greddy/Q45 and do the motor properly, maybe with an rb30(then you can just use rb30ET forged pistons to give you high 8's:1 comp)

Edited December 21, 2007 by Adriano

[GreeceS13]

Anyone know what pistons I can put to NEO??

Wiseco don't have neo pistons?

EDIT

Adriano are you sure? In this post they say Abo Bob said that will be 8.75:1!

http://www.skylinesaustralia.com/forums/Rb...rged&st=20#

RB25 and RB26 aren't different high pistons? Who knows to calculate the compression? Always with stock gasket!

For both 25 and 26 pistons!

Edited December 22, 2007 by GreeceS13

[Spoolup]

NEO has a smaller combustion chmaber so R33 pistons will produce a high ( as in too high ) a comp ratio.

Exhaust manifold is the same stud pattern.

OEM gaskets - some will be different, like valve stem seals etc - but most should be same as R33

[E_Lu-SHuN]

rocker cover gasket is different from 33 and 34