Jump to content
SAU Community

Recommended Posts

Just got my high flow back and installed on my rb25. Problem is when boost reaches its preset max it pulsates up and down at a fast rate 1-2psi. It Is fine untill it reaches full boost. I've been told it isn't surge because it only happens after full boost...is this correct. Stronger waste gate actuator needed????

pls help.

Link to comment
https://www.sau.com.au/forums/topic/19854-fluttering-turbo/
Share on other sites

I know of one guy who had his highflowed and did the exact same thing, had to take it back because they hadnt matched the wheels properly or something. ask the guys who highflowed? they would have a good idea of whether its the conpressor/exaust wheels or your wastgate actuator.

Link to comment
https://www.sau.com.au/forums/topic/19854-fluttering-turbo/#findComment-417249
Share on other sites

I think you are refering to surge. I have had a turbo that surged before and I can say this is different. I tired a piece of wire to the waste gate and put it through the firewall. I applied preasure to the actuator when reaching full boost and it fixes the problem. I will move the waste gate actuator further back to increase the tension slightly and see how it goes. I have heard of problems with surging when using the RB25 exhuast housing. I am using a VG30 which has a bigger A/R.......fingers crossed.

specs: Comp T04B Vtrim

Turbine and housing are VG30

this setup has made 245rwkw@12psi on a 3ltr.

ps makes full boost before 3000rpm in third.

pps Who is the best dyno tuner in Adelaide???

Link to comment
https://www.sau.com.au/forums/topic/19854-fluttering-turbo/#findComment-417930
Share on other sites

Im getting towards that now, but, I like to have a go myself and it doesn't cost any money. I have experimented with altering then tension on the wastegate and managed to move the surge around the rev range but no aleaviate it all together. I'm still trying different things so I'll keep ya posted... might be one of u one day =)

Link to comment
https://www.sau.com.au/forums/topic/19854-fluttering-turbo/#findComment-419055
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...