Jump to content
SAU Community

Recommended Posts

hay ive got a 1994 s1 skyline with the fog lights and indecators in the front bar, but ive got no button for the fog lights and i dont even know if there is any in there haha. just wondering if i was to put some h3 lights in there where could i wire them up to or where are they supposed to be wired up to????

i think it was an option on the S1's. mine doesnt have lights in there either.

caution: i remember reading that the plastic in these units isnt made to handle the heat of lights. so maybe use LEDs or soemthing small.

i think it was an option on the S1's. mine doesnt have lights in there either.

caution: i remember reading that the plastic in these units isnt made to handle the heat of lights. so maybe use LEDs or soemthing small.

My Type M S1 had globes, wiring, etc but no little twist-knob on the indicator stalk. I pulled the surround off the steering column and there was a little two-wire connector there, just taped back against the rest of that loom. short out the two pins - foggies on. For a while I had a little switch wired up to this connector, but after a while I ended up picking up an indicator stalk which had the fog dial and swapping that in. Just wanted it to look factory rather than an aftermarket switch!

  • 4 weeks later...

i like how you got the pic of the white R33 with it marked on to show what globes go where.

1 of them for all the models would be awesome!

totally up to yourself,but maybe speak with DAN666 who runs the interior globe sales thread.

Maybe we could get a list of every globe on most our cars.

cheers

Well if I can get definitive answers on what bulbs go where (I will probably need confirmation, unless I go around my mates cars with a socket set :P) then I can certainly make more of those pics :D

I can confirm that the front indicator light bulbs for R33 Series 2 GTS-T are T15s which are about 35mm x 15mm

The parkers are T10s as well as rear number plate light bulbs and side indicator bulbs

The interior centre dome festoon bulbs are the 31mm types known also as 3022

The driver and passenger interior bulbs are BA9S 1895

the rest is pretty much covered in the 1st post

  • 11 months later...
i think it was an option on the S1's. mine doesnt have lights in there either.

caution: i remember reading that the plastic in these units isnt made to handle the heat of lights. so maybe use LEDs or soemthing small.

Yeah i've got a 1995 Series 1 and i've got my fog light switch on the stalk, just have to twist it on or off.

I'm definately going to replace most my lights with blue now lol, i've got like a blue theme going lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Gosh these Rb pulleys/alternator or whatever is causing the problem is absolute rubbish lol. Haven't even done that many km on it.
    • Yeah man, will only progress further hopefully. The bonnet is coming off to get sprayed very soon
    • Once the belt slips it can very easily cause a cascade that encourages more belt slip. Check the pulleys carefully and see if the grooves have cupped. If it has it's time to replace the pulleys. If the rubber has glazed you also need to replace it. Shouldn't be shiny. From the factory there's a lot of exposed fibers(?) on a v-belt that will go away as it's broken in but some should still remain visible without sticking out significantly like a new belt. I went through this on my dad's Camry recently. It would keep slipping even after setting the tension higher, only solution was a new belt.
    • Belt polished and/or pulley(s) glazed. Rub pulleys with sandpaper, replace belt.
    • I've also got a quick jack. I would never get under my car again without using it.  While it might be quicker to use a jack and stands, it is such a quality of life improvement that I wouldn't have it any other way now.  How much slower the quick jack is to setup will be based on your circumstances. Can you leave the jack rails on each side of the garage? Can you leave the hydraulic lines attached? etc.  If you can drive the car into the garage and simply push the jacking rail thingos under the car into place, it is super quick to setup and use. But if you have to pull the pump unit out of storage, attach the hydraulic lines, wheel out the lifting rail thingos.... yeah takes a bit of time. Having said that, I would still prefer that to using a jack and stands lol. 
×
×
  • Create New...