Jump to content
SAU Community

Recommended Posts

Hmm turns out i actually don't have fog lights either :D. I thought i did because it said so in my car manual, but i checked recently and it turns out i don't.

Anyway, i think my parking lights are T10's and i have an R33 Series 1?

  • 4 weeks later...
  • 3 weeks later...
wot about R34 xenon headlights... anyone know wot type of bulb they are??

R34 Headlight bulbs are

Parkers: T10

Low Beam: H1

High Beam: GE 9011

Note GE 9011's were discontinued about 18 months ago,they were replaced by Toshiba 9011"s but you can also use any 9005 bulb by filing a bit off one of the tabs.

Both H1 and 9005 bulbs are as cheap as chips on everyone's favourite auction site.about $18.00 a pair including postage

mate can you take a pic of the front bar indicators next time you take em out ..never seen them with fog lights in them on a series 1 before...mine just have a slot for the parkers..wouldnt mind chasing up a set..

Edited by thizzle
  • 2 weeks later...
R34 Headlight bulbs are

Parkers: T10

Low Beam: H1

High Beam: GE 9011

Note GE 9011's were discontinued about 18 months ago,they were replaced by Toshiba 9011"s but you can also use any 9005 bulb by filing a bit off one of the tabs.

Both H1 and 9005 bulbs are as cheap as chips on everyone's favourite auction site.about $18.00 a pair including postage

If you can get a hold of the 9011's use those as they are the brightest halogen bulbs you can get.

A comparison:

http://hirheadlights.com/stats.htm

And some info on 9011's

http://hirheadlights.com/

  • 3 months later...

If anyone is interested im putting together an LED kit for the R33 series 2 (maybe more models if these become popular)

Basically replacing all of the exterior bulbs with LEDs.

Fog lights

Parker lights

Front, side and rear indicators

LED indicator flasher unit (so no more fast flashing indicators)

Reverse lights

As i already have the aftermarket LED tail lights in i wont be getting LEDs for the stop lights. I did however put LED bulbs in when i had the stock tail lights in and they looked crap.

Ill post some pics in a few weeks.

  • 3 months later...
  • 4 months later...
cheers for the help ppls

i moved the washer bottle to the side, and managed to get it out, and back in, using long nose pliers.

here's my contribution to your thread :thumbsup:

the parker bulb type, and holder. R33

post-29392-1198462460_thumb.jpg

hey just asking how did u managed to put the new light in??? I got a series 2 R33 and it is very tough to put it back...did u twist it or something?? mine is a 15mm wedge btw...so its a big bigger

  • 1 month later...

.. And be careful even with 'so-called' white LEDs. My car had DAN-666 'white' LEDs which when I was forced through a Regency defect inspection for my exhaust, they added my 'too blue parkers' to the list of things to the *new* defect list. Awesome.

Yep for the reason shown below, something that is 'less yellow' appears 'more blue' even though it is a spectrally a definate pure white (5000k to be exact) it is 'less yellow'

than a 3000K tungsten bulb.

A good example is to put the white LED next to a BLUE one, it actually appears 'more yellow' but for the clowns at Regency 'perecption is reality'

HunterLab.jpg

Edited by 666DAN
  • 4 weeks later...

Hi, does anyone know if you can upgrade the globes on the Driving lights for an R33 series 2. I see from this thread they appear to be 55W H3's and I know that for the headlights (being plastic) you shouldn't go above the stock 55w bulbs, but does the same apply for thre driving lights? (are these lenses also plastic?)

They are fog lights mate. And are pretty much illegal to use in 90% of driving conditions. Which is why i put an SMD LED cluster bulb in there, so now they are driving lights.

I could argue the point to the police if i get pulled over, i probably wont win seeing how the rest of the car breaks nearly every rule in the book ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah, just take the other one off too 
    • Oh yeah forgot to also mention need to also unplug the IACV as well. Thanks for the reminder @MBS206 Unplugging the TPS takes it out of closed loop so you're able to screw down the IACV without the ECU trying to add/subtract timing to maintain the idle (not sure PowerFC can even do this, but Nistune and the OEM definitely does)
    • For sale is my 1999 Nissan Skyline R34 GT-T, tuned to 234 kW / 313 hp. I've had the car for a few years as my daily driver. The car is original (as far as Skylines go), with only a few minor upgrades to enhance performance and driving experience, as typical for such a car of its age. Overall, it is in great condition with no body rust, thanks to its earlier import date. It features a top-notch security system (not literally, but it's great!) with remote start and still functional 4-wheel steering via HICAS. It comes with several performance and handling upgrades, including:     Hypergear 450HP Turbocharger running 17 PSI boost, installed mid-2021 by Jaustech     550cc injectors     Nistune ECU     Front-Mount Return-Flow Intercooler     X-Force Stainless Steel Exhaust     Upgraded engine mounts     Bottom end bearings replaced     BC Coilovers     Lenso DR1 rims     Bridgestone Potenza Adrenalin RE003 TL 245/40R18 97W tires, fitted early 2023 The interior is mostly stock, with a few additions:     Viper Satellite Tracking System with remote start     Bluetooth Double-Din Touchscreen Head Unit     Steering wheel cover Cons:     A few paint imperfections here and there     Driver’s seat shows more wear than the others. It's not torn at all, but I've added a seat cover to protect its condition. I also have a CarVX Vehicle History report available for serious buyers, so you don’t need to purchase it yourself. Price: $26,000 ONO.
    • I've had two suzukis in the past have an extremely hard time turning over and not starting after sitting for a few weeks. Ended up the alternator would seize up causing the starter to force. Same issue both times.  Maybe they're sourcing their alternators from the same place...
×
×
  • Create New...