Jump to content
SAU Community

Recommended Posts

Which silicone do I use to put on my coil packs to help the missfire on boost? There's a lot of different kinds, like the gasket stuff and the spray silicone, but can someone give me a picture or the name brand and which type of which one to use please? Also, is silicone the best thing to use, because I have seen posts about people using clean nail polish and heatwrap and stuff. I HAVE SEARCHED TOO!

Thanks,

Mike

Edited by Michaelove
Link to comment
https://www.sau.com.au/forums/topic/198765-about-siliconing-your-coil-packs/
Share on other sites

Selleys 401 is the one i used. Its industrial grade high temp silicone, used as an insulator, amongst other things. You can get it at bunnings.

It's probably just as important to clean the contacts on your coils, where the spring sits.

The last thing i tried was stretching each spring about 8mm longer, to make a better connection with the spark plug. I havent had a misfire since, but then the weather hasnt been freezing cold, so it may be due to that.

Edited by Munkyb0y
Selleys 401 is the one i used. Its industrial grade high temp silicone, used as an insulator, amongst other things. You can get it at bunnings.

It's probably just as important to clean the contacts on your coils, where the spring sits.

The last thing i tried was stretching each spring about 8mm longer, to make a better connection with the spark plug. I havent had a misfire since, but then the weather hasnt been freezing cold, so it may be due to that.

Thanks a lot.

no that wont work. that's more like a lubricant. get the 401. it's only $10.

Okay, the problem is that I live in USA and we don't have bunnings. Do you know of any other brands? Or any other stores I Can get it at? I don't think USA has shellys

Okay, the problem is that I live in USA and we don't have bunnings. Do you know of any other brands? Or any other stores I Can get it at? I don't think USA has shellys

what is the silicone supposed to be used for? ie, painting, flooring, ect? Is it like the caulking stuff?

Edited by Michaelove

it's used to seal glass on oven doors, and also used as an industrial electrical insulator.

not sure of an equivalent product, but there would be something.

here's the selleys 401. it's the only pic i could find

Silicone%20401%20Clear%20310g.jpg

it's used to seal glass on oven doors, and also used as an industrial electrical insulator.

not sure of an equivalent product, but there would be something.

here's the selleys 401. it's the only pic i could find

Silicone%20401%20Clear%20310g.jpg

sweet! thank's a lot man. one more question! where exactly do i put the silicone on the coil packs? that's the last thing i can't find =/

here are mine

post-29392-1198366555_thumb.jpg

seal the whole underside of the coil, up to the bracket. leave the stem uncoated, as you need to fit the rubber boot over that. also make sure you clean those contacts. u can see mine are shiny gold. they were a dull grey when i started.

here are mine

post-29392-1198366555_thumb.jpg

seal the whole underside of the coil, up to the bracket. leave the stem uncoated, as you need to fit the rubber boot over that. also make sure you clean those contacts. u can see mine are shiny gold. they were a dull grey when i started.

awesome. thank's a lot.

no worries man.

have you made sure your missfire isnt caused by your spark plugs? 0.8mm gap is highly recommended, although nissan specify 1.1mm

and many people have found the copper plugs to be better than the platinums/iridiums, that are also recommended.

Edited by Munkyb0y

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update: I got the magnet out. I bought 3 different flexible magnetic reach tools, but none of them worked. The magnet on the tip was all less than 2lbs of force, so i had to buy a special cylindrical magnet that had a pull force of 9lbs.  The magnet finally came in the mail yesterday, so i got under the car to get to work. The super strong magnet isn't that long, so i only have about 1 finger pinch lengths to hold it. I was so scared when i was going in the hole, that the 9lb magnet would just fly away inside the oil pan never to be seen again, but i had my butt cheeks clenched and finger gripped on that thing so tight, i managed to get it to suck the other magnet out.  It was a victory for me last night.         
    • Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
×
×
  • Create New...