Jump to content
SAU Community

Recommended Posts

Which silicone do I use to put on my coil packs to help the missfire on boost? There's a lot of different kinds, like the gasket stuff and the spray silicone, but can someone give me a picture or the name brand and which type of which one to use please? Also, is silicone the best thing to use, because I have seen posts about people using clean nail polish and heatwrap and stuff. I HAVE SEARCHED TOO!

Thanks,

Mike

Edited by Michaelove
Link to comment
https://www.sau.com.au/forums/topic/198765-about-siliconing-your-coil-packs/
Share on other sites

Selleys 401 is the one i used. Its industrial grade high temp silicone, used as an insulator, amongst other things. You can get it at bunnings.

It's probably just as important to clean the contacts on your coils, where the spring sits.

The last thing i tried was stretching each spring about 8mm longer, to make a better connection with the spark plug. I havent had a misfire since, but then the weather hasnt been freezing cold, so it may be due to that.

Edited by Munkyb0y
Selleys 401 is the one i used. Its industrial grade high temp silicone, used as an insulator, amongst other things. You can get it at bunnings.

It's probably just as important to clean the contacts on your coils, where the spring sits.

The last thing i tried was stretching each spring about 8mm longer, to make a better connection with the spark plug. I havent had a misfire since, but then the weather hasnt been freezing cold, so it may be due to that.

Thanks a lot.

no that wont work. that's more like a lubricant. get the 401. it's only $10.

Okay, the problem is that I live in USA and we don't have bunnings. Do you know of any other brands? Or any other stores I Can get it at? I don't think USA has shellys

Okay, the problem is that I live in USA and we don't have bunnings. Do you know of any other brands? Or any other stores I Can get it at? I don't think USA has shellys

what is the silicone supposed to be used for? ie, painting, flooring, ect? Is it like the caulking stuff?

Edited by Michaelove

it's used to seal glass on oven doors, and also used as an industrial electrical insulator.

not sure of an equivalent product, but there would be something.

here's the selleys 401. it's the only pic i could find

Silicone%20401%20Clear%20310g.jpg

it's used to seal glass on oven doors, and also used as an industrial electrical insulator.

not sure of an equivalent product, but there would be something.

here's the selleys 401. it's the only pic i could find

Silicone%20401%20Clear%20310g.jpg

sweet! thank's a lot man. one more question! where exactly do i put the silicone on the coil packs? that's the last thing i can't find =/

here are mine

post-29392-1198366555_thumb.jpg

seal the whole underside of the coil, up to the bracket. leave the stem uncoated, as you need to fit the rubber boot over that. also make sure you clean those contacts. u can see mine are shiny gold. they were a dull grey when i started.

here are mine

post-29392-1198366555_thumb.jpg

seal the whole underside of the coil, up to the bracket. leave the stem uncoated, as you need to fit the rubber boot over that. also make sure you clean those contacts. u can see mine are shiny gold. they were a dull grey when i started.

awesome. thank's a lot.

no worries man.

have you made sure your missfire isnt caused by your spark plugs? 0.8mm gap is highly recommended, although nissan specify 1.1mm

and many people have found the copper plugs to be better than the platinums/iridiums, that are also recommended.

Edited by Munkyb0y

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There aren't boost creep issues, it's not engineered around the restriction of the cats but if you haven't tuned the engine a full decat + exhaust can flow enough air to run off the end of the OEM load scales and you will get a pretty substantial reduction in ignition timing as a result. I recommend using DFCO, avoiding ignition cut limiters, and avoiding popcorn tunes along with running a cat unless you enjoy a perpetually soot-covered and potentially burnt bumper.
    • Small update, it's been slow moving over the Christmas period with money having to go everywhere thats not my car 😅. I got myself a little present to myself from "santa" in the form of some tidy radiator mounts from fitmint automotive to get rid of the stock ones that look like they have been in an accident before and then straightened by a caveman. I know I should've replaced the rubber bush at the same time but I had no idea how bad they were until I was replacing the mounts. Decided to order their dash mat while I was at it as I feel like I am lucky enough to have a pretty decent condition dash and I don't want to risk it being ruined while it's parked in the aussie sun while I'm at work. I have found another electrical fault to add to the evergrowing list to eventually chase down. Every time I replace my taillight globe it blows within a day of use, I'm starting to think my life would be easier if I took a few minutes to learn how to use  a multimeter 😂.   Had some luck with finding a series 2 drivers headlight on marketplace to replace my mismatched series 1 headlight, a subtle difference but it's nice to have a matching set of lights now.   I returned to the air con problem due to being sick of this summer heat, found a good condition condenser to replace my leaking one! I got it in the car and was happy when I got the thumbs up that the system was now holding gas. Sadly the compressor is not kicking in for some reason, we even tried branching the relay in the fuse box. I have tried to do some research on the issue with no clear understanding of what the fix is, so for now it will be placed on the backburner until I can be bothered to look into the wiring to the compressor. The last small mods I have done was cutting the horizontal vents out of the front bar, not really in a functional airflow sense but I just think it looks better as I am not a fan of the series 2 bar. I also switched the shift knob out for a hosoboyo aluminium grex style one, it has a really nice more direct driving feel than the outdated rubbery oem one. Thirdly, I chucked on one of the ebay bonnet strut kits. The fitment is decent and they seem to work fairly well. They have only given out once while the car was parked facing downhill, I think if I was working under the bonnet I would still put the oem hood stay up to be precautionary as to avoid getting a speedy concussion.
    • Got pneumonia, haven’t played with her in a while, but I’m back now. Previous owners cut bonnet pins into the bonnet. My choice try find a replacement or spend $15 get some pins myself to cover up. Now only one small hole to cover. looks shit now, but when the bonnet is red again. Be good 🤞
    • No R32 GTSt had 15" wheels. 205/55-16 was standard GTSt fare. 4.36:1 is standard R32 turbo auto diff. I think the manual was too, not 4.11. 4.11 and 4.08 were R33 namual and auto respectively.
×
×
  • Create New...