Jump to content
SAU Community

Recommended Posts

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

well. yes kind of. it depends how tight it is and how tolerant you are of the noise.

basically, if it is tight it will "skip" in tight turns at low speed, eg every time you park in the Woolies car park. Personally it didn't worry me because the on track performance was so good, but mothers with strollers used to look at me like I was the devil

sorry to hi-jack - but whats a good to average 1.5 diff cost these days?

but mothers with strollers used to look at me like I was the devil

Duncan - dont blame them :happy:

yeah under 20 or even slower. at quicker speeds the wheels can sort themselves out and turns dont tend to be as tight.

yes you can tighten a mechanical diff by adding or changing shim thickness. but aftermarket ones will already be pretty tight

yeah under 20 or even slower. at quicker speeds the wheels can sort themselves out and turns dont tend to be as tight.

yes you can tighten a mechanical diff by adding or changing shim thickness. but aftermarket ones will already be pretty tight

Can you heel and toe?..

I know its quite hard to keep a 1.5 in cheak when you give it a hiding or in the wet and you dont heel and toe down gears.. compression lock up is a biatch..

Do u mean compression lock is a bitch on a 1.5way compared to a viscous diff or compared to a 2way?

If anyone wants a nice quiet streetable diff, go no further than a Nismo GT LSD Pro TT-Model 1.5way. It's the 'softer' model than the rest.

yeah i was looking into the Nismo GT LSD Pro TT-Model 1.5way, would anyone happen to know the life span of these diff before a rebuild is needed???

A lot longer than other diffs. 1) Because as they wear, you can adjust the preload to compensate and 2) they have a lower overall clamping force on the clutches than other diffs.

well looks like the diffs going in

thanks alot guys

cheers

if its a daily driver keep the viscous diff!!!

mine went from daily driver to weekend car as soon as the 1.5 way kaaz went in, but the nismo sounds nice

if i were you, i would take a ride in a car with a mech diff before you decide, its not the skipping thats the problem, its the *CLUNK CLUNK*, very loud!

and then you gotta try and convince everyone that its normal

if its a daily driver keep the viscous diff!!!

mine went from daily driver to weekend car as soon as the 1.5 way kaaz went in, but the nismo sounds nice

if i were you, i would take a ride in a car with a mech diff before you decide, its not the skipping thats the problem, its the *CLUNK CLUNK*, very loud!

and then you gotta try and convince everyone that its normal

??? Great back to square one???

thanks for the heads up champ

Any one else like to comment?

Just a couple of quick ones:

i also agree that you don't want a 1.5 way in a daily driver, particularly if you have any sort of subframe bush upgrades, pinapples or alloy collars. I'm sure people do it and are happy to do it but i think thats what pushed mine over the edge as far as being a nice car to drive around in.

Re the nismo wearing less and having adjustable preload. If it slips more (less preload) it wears the plates more. It's not infinitely adjustable either, there are 3 levels of preload so if it wears and you bump up the preload to the next step it's actually a bit of a jump, rather than a tweak. To tweak it you'd need to get it apart.

As an alternative, maybe consider a GTR rear end, they are a mechanical type lsd, 1 way and a bit looser than your average aftermarket diff so much nicer in the day to day grind, or even a torsen out of an s15. both options require a bit of work though and a few more bits swapped

They are a two way, not one way. I used to have a Nismo 1 way and it was very obnoxious. You do get used to it and you learn to drive around it a bit but everyone does look at you funny, which I quite enjoyed. Still, some days, maybe I was a bit tired or cranky, it would annoy me a lot. Now I have a full GTR rear end and it's much nicer on the street. The lock up on the track isn't as good but overall I would say that it's a better compromise for a street car.

To do this you need the diff centre, housing, half shafts, drive shafts and hubs from an R32 GTR. It all bolts up. I got the lot with rear subframe for $700 from a mate. SSS wanted $1200 so somewhere in between there is your window.

That said, I agree that you should get someone who has a 1.5 way or 1 way to take you for a little drive so you can see what it's like. Any old SAU type event should do or post up where you are and maybe someone from here lives nearby.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Does it make a difference in your turbo having a shorter life if you have a cat converter as it causes that back pressure versus less/no back pressure with a decat? (Not sure if this is accurate) Also slightly different question if you went from a oem cat to a decat or vice versa will it require a tune? I heard if you change the dump pipe onwards it requires a tune?
    • No. Have only gotten as far as contemplating the task of having to put in the required fairly heavy wiring and fusing to run it (along with the big alternator), and preferring not to. But otherwise, it would be nice to have a little extra freedom as to exactly where the compressor is located and free up some space around the exhaust side of the engine.
    • Following from this in a related by not closely-related sense... Because I was buying a bunch of other GKTech stuff, I got some rear subframe collars. The history that leads up to this is: 25+ years ago the car arrived into the country with stock subframe bushes. At some point shortly thereafter I added Whiteline pineapple rings, set up neutral, and it improved the rear end behaviour. Well, it is my vague memory that I was happier with it with them in. Less axle tramp on launches, generally better, etc etc. ~2012 it got a new non-HICAS subframe with new stock bushes. No pineapple rings. I reckon that ever since then I've been dissatisfied with the axle tramp. Recently I've been f**king around a lot with all aspects of the suspension. One contemplation has been to relocate the rear lower control arm front mount points (and do the other things needed to make that work) to improve longitudinal rear grip by getting rid of some of the stupid anti-squat that Nissan ladled into the R32. But.... before doing that I thought I'd put some collars in. And.... The collars are good. The rear sounds a little bit different, but there has been no significant increase in NVH coming up into the body. In terms of rear behaviour - expansion joints on long sweeping elevated freeway ramps that would sometimes cause the rear to jiggle around a bit, no longer seem to do so. It appears that jamming chunks of metal into the gaps in the rubber so they can't move much is a really good thing. And the launch behaviour and general forward traction situation seems to be greatly improved too. It's impossible to be really sure, because the tyres are completely shagged - they are freakishly willing to let go right now. But as an A-B test with the same tyres it certainly seems to grip up a lot better. Highly recommended to anyone who still has stock bushes.
    • Bit off topic maybe but has anyone had a crack at one of those aftermarket electric compressors ? Bit of a search came up with one put out by Speedy Air Spares. Looks interesting and looks as if you'd have to run a big arse alternator. Found this out after the fact as my air con compressor packed it in and soon after my alternator ! !
    • Yes. Needs new ports. Usually just achieved by screwing an adapter onto them. Be aware that any AC compressor that hasn't been used in a long time will very likely have dried out seals and will not hold gas. Oh, and obviously you will require a new receiver-dryer also.
×
×
  • Create New...