Jump to content
SAU Community

Turbo Timer

Trent04

By Trent04,
in General Maintenance

 Share

Recommended Posts

Trent04 Proficient

Trent04

Posted
Posted (edited)

hey, i need your help, i got my car serviced this morning, and i also got the place to re-locate the turbo timer from the centre console to under the steering wheel.. and they said no problem..

i went to pick it up, and the first thing they said to me was "the tubo timer isn't working?" - but it was working when i dropped it off..

it does not light up, turn on, or anything, it just sits there.. and they wouldnt have a look to fix it, any ideas what could be wrong and is it a big problem if i dont have it for a little while until it gets fixed?

cheers

Edited by Trent04
Link to comment
https://www.sau.com.au/forums/topic/198961-turbo-timer/
Share on other sites
gdzlar1 Proficient

gdzlar1

Posted
Posted

yer i serviced my car and all to mate this is on a r32 gtr and copped the exact same problem the only thing i done was wen and bought a stock standard turbo timer n got a mate to put it in for the time being but still want my other 1 putback in but would turn on for some reason but the other turbo timer i got did

Link to comment
https://www.sau.com.au/forums/topic/198961-turbo-timer/#findComment-3549377
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      First/Second Post

      By Duncan · Posted

      Welcome Alice......hope you have a bit more luck from here on! What was done in the build?  
    • svenskalice
      First/Second Post

      By svenskalice · Posted

      Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • svenskalice
      Kaizo Industries

      By svenskalice · Posted

      Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • believer
      HKS Vcam Step Pro Issues

      By believer · Posted

      I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
    • Dose Pipe Sutututu
      WTB R32 GTR Window glass stabilisers

      By Dose Pipe Sutututu · Posted

      yeah, there's a country that recently started importing Skylines, I blame them.
×
×
  • Create New...