Jump to content
SAU Community

Recommended Posts

Hey There,

Got my new engine put in this week, and after a bit of driving around etc i've noticed that sometimes when the revs are low and building up to boost

at about 2500rpm the car stutters a bit and feels like its holding back, then once it gets past there it boogies.

Now, i had a major issue with one of the cams f**king up so one of my old cams was used in the motor as the other was broken, now if the cams were say to be different would this cause the issue? The cams supposably on the new engine were NA ones but im unsure of this as a fact.

The car doesnt really pull hard on 14psi as it used to, it used to throw you back in your seat now the car just seems to pull along the revs?

Also thinking Injectors or fuel pump?

Help! I wanna get this fixed!

Trent

oh ok sorry - so the engine was just put back in the car?

id say something is loose, like a hose clamp, intercooler pipe work, the air vac lines for the actuator etc - something along those lines?

Well its not the gap on the plugs

After a fair bit of reading ive come to the conclusion that its the fuel pump not sending enough to the engine, probably causing it to lean out. The car runs fine when cold but thats when its running rich but as soon as it settles its stuffed.

"Many of you with S13s have probably experienced hesitation on boost which can start to happen when the standard fuel pump is getting old."

I believe thats what my problem is.

Now im estimating that its dangerous to drive the car whilst in this state, i.e fuel pump could break down, or could lean the engine out.

Would i be right saying that?

it will be dangerous for you to give the motor any reason to demand more fuel yes.. like cracked piston spec. putting around not so much the best thing for you to do man is take it to a dyno and get your air/fuel checked out they will be able to tell u if it is leaning out or not, if so extreemly likely tis the fuel pump

what gap and how much boost are you running? I was running 14 psi and I had a stutter even after I put in a new 040 pump and pulled the gap from 1.1 to .8 and it stopped it

Edited by BANGN
  • 2 weeks later...

Car was datalogged today, we found that the timing was out. We also adjusted the teeth so that it was sitting perfectly.

We also changed over to a working CAS which still didnt fix the problem, the timing was jumping around from sitting on 15 to 7/8 up and down. Also tried a few diff coilpacks but we are unsure if they are working correctly.

I'm waiting on my walbro replacement to come back then ill be installing that into the tank see if that fixes the issue, other than that its coil packs/injectors we are thinking.

Anyone able to add some to the situation?

Also, if somone could be nice enuff who lives in the melbournes west to let me borrow there coilpacks for 2 minutes to see if the car runs any better would be appreciated.

For a 180sx SR20 Red Top

Anyone who can help either post or pm me please!

My car does the same sometimes, most likely cause would be either fuel pump or injectors. i have a power fc and when it happens i look at the inj duty and its 100% . It never used to it when i had 550cc in there. Two ways to fix it....

1. Bigger fuel pump, Fuel reg and bigger Injectors and tune.. or

2. Turn the boost down.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Shit thing to find eh? I guess the big issue is that whatever "fix" you do now, it might slow the rust down but won't fix it. I just wanted to add that in no way is fixing sheet metal in 3 dimensions the place to start with welding....that is a pro only job because its too hard to work out where things should be, let alone doing a clean enough job that it can look OK and still be strong too.  I needed to get a new rear quarter panel on the GTR and it took a pro weeks to get the old one off cleanly, new one on in the right place and looking somewhat like it should have with most of the previous connecting panels in place. Gluing a couple of bits of metal together with a welder in the garage is doable, but that is totally different to doing panel  replacement
    • This seems to be a very popular swap since all the turbo skyline prices went through the roof! I'll let someone more familiar chime in, but I understand that yes you probably want to swap the loom in to swap out the auto TCM stuff. You should not assume everything just plugs in either, you need to check at least the ECU wiring diagram for any differences at the plug at the left headlight and probably the ones near the ECU that join the dash loom too  
    • hows it fellas, my first post here which seems crazy cos half the forums i read are like the same age as me haha. to make a long story short ive got an r34 sedan (rb25de neo auto) which im swapping to a s0/s1? rb25det, r33 big box and nismo gt pro lsd. i have the motor and gearbox all bolted up outside the car, old motor and trans out. i bought the motor with stock ecu and loom, do i switch over to that? or will it be easier to get a r34 manual ecu and keep the loom if thats even possible.  also engine mounts look different, anything else thats different or incompatible? cheers, hope this all makes sense Paddy
    • att.4QNbuJlz_gNZPFBGFqeEvxSUHXkGt7z40V59MrtXTPg.mp4    
    • Plan on the day will be to park trackside. Depending on space availability we will try put a small shade tent and a few of the cars on top of the hill inside turn 3, this is an easy to get to parking area with views of Turn 2, Turn 3, Turn 4 and Turn 5 and limited other pieces of the view around the track. IMPORTANT NOTE! One consideration from previous years is from memory the trackside parking sells out before the admission tickets, for that reason I encourage anyone planning on coming to buy tickets for parking now via the official website; https://www.worldtimeattack.com/ The type of parking you are looking for is 2 Day Park & View (Access Around Venue) Vehicle Pass Only Please note this does not include admission to the event itself, remember to grab that also, and kids under 12 get in for free!
×
×
  • Create New...