Jump to content
SAU Community

Recommended Posts

Finally I got over it, this car been build by one of our member up here Jason "V8SkylineMan". It is one of those early GTR 32. But everything is in good condition. The car done around 80000km. Looking for around $22000 with every single aftermarket piece on the car.

Spec:

1990 GTR 32 in black

Mods Include

Engine/Performance

Tomei Arms Turbo x 2 with custom polished Greddy piping

Tomei 268 cams

Custom blue cam covers

Custom blue intake plenum

Custom blue cambelt cover

Trust belt

HKS oil cooler and relocation kit with braided lines

Apex'i Hybird intercooler

Z32 80mm AFM's

N1 water pump

N1 oil pump

HKS pod filters

Apexi Power FC with Hand control (the GameBoy)

Greddy turbo timer

Greddy Iridium plugs-cold #7

Split fire coil packs

HKS 600cc Injectors

Nismo fuel pump

CES race dump pipes

CES full 3.5 in open race exhaust

OS Giken triple plate clutch

OS Giken Cross Mission Gears

Nismo diffs 2 way

Brakes/Suspension/Wheels

Racing Ohlins coil overs with helper springs

Adj suspension linkages Aftermarket suspension arms

Cusco tension rods

Brembo R33 GTR brake upgrade front and rear-ABS removed

Cusco brake boost stop kit

Cusco front and rear strut braces

Hicas removed

Nismo 18" LM GT-4 Wheels (Very Rare)

Interior/Exterior

N1 Headlight

Do Luck carbon bonnet

Carbon grill insert

Bonnet pins

Real Tomei Rear wing

HID

Short shift kit-razo knob

Tomei 310km/h speedo (Around 80000klms)

Blitz Mirror Gauges x 4 (Turbo,oil/water temp and oil Pre)

Greddy E-01 Boost Controller

Tinted Windows

Some other parts I may forgot... and some more information, the car would like a retune on the Power FC since the car not been driven for some time already coz of no license

sms/call 0433473088

or

pm me

post-14837-1198501269_thumb.jpg

post-14837-1198501294_thumb.jpg

post-14837-1198501314_thumb.jpg

post-14837-1198501336_thumb.jpg

Edited by Stephen22
Link to comment
https://www.sau.com.au/forums/topic/198984-fs-skyline-r32-gt-r/
Share on other sites

Got told it is the same looking and size with the one sells from Tomei

Strock Bottom End

18by8.5(f) 9.5®

No dyno coz license gone for a year...

no, just disconnected coz will work better with the Brembo.. Everything is still on the car, can be hook it back up

Did you do most of the work here, or was it imported like this from Japan? Do you have receipts?

Tomei Turbos have different models... just like HKS do... Do you know which Tomei Arms turbos?

hey bud hows it goin jus readin threw ur page n ur car is exactly wat im lookin for but im poor as so i hav a series 4 rx7 convertable, extend port, doweld n intake n exhaust shaved , 5speed , brass button, to4, pwr fmic, 1.8lsurge tank , 044 pump , 50mm hks wastgate with 5inch screamer , full 3inch stainless with hi flow metal cat, 4 bosch coil packs, microtec lt10x with hand controler ,greedy electronic boost controler auto meter everything, ova 10gs in stereo tha entire car has been rebuilt absolutly everything n has only been running 4 20 hrs (i hav a hour meter on tha car) il stop now i dont wana take up 2 much of ur page il b here all day but has made 294 on mazfix's dyno at tha tyer only on 10lbs of boost started to run outta fuel but recently put fuel reg n 17lbs of boost archie at mazfix says easy 350 at tha tyer soon il b posting tha car on here n else were 4 sale 4 20+ or swap 4 r32 gtr..... reply to me wen u can thanx bye ..... anthony 0409095818

post-46007-1199180877_thumb.jpg post-46007-1199180935_thumb.jpg post-46007-1199180996_thumb.jpg post-46007-1199181028_thumb.jpg post-46007-1199181080_thumb.jpg post-46007-1199181123_thumb.jpg

finaly got m car on here so ive got the full write up on wat mi cars got if u want to check it out

http://www.skylinesaustralia.com/forums/S4...le-t200190.html

Do you have receipts etc? Esp the gearbox... Work done in OZ or Japan?

Do you have the dyno sheet from Mercury's Dyno? (if it is the same car)

It IS the same car...I saw 307awkw with my own eyes...16psi and conserative tune and that was b4 the CES dumps were put on...it would pull 340awkw at 20psi no probs

  • 3 weeks later...
  • 3 weeks later...

The car is still going

to correct someone up here....the car been under my name over 3years, it never been changed name as someone said up here.....and yes, it used to have a pair of T517Z in it.....but it didnt really last long on the QR....then at the end these Tomei's went into the car....as I said, the car needed a tune then it will be sweet~~

  • 3 weeks later...

yeah interested in swaps plus cash at all?

have a RB20det silvia.. full kit rims, etc all the d\goodies.. ready for drift..

or a manual r33 GTsT turbo, resprayed, 18s, lsd, coilovers... etc.

if keen drop me a PM.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome Jan, It's very likely that you are in over your head. You'll just have to learn to swim hard and fast! These old rust buckets have more ways to bankrupt us than almost any other car. But hopefully there's nothing wrong that ruins the whole show! We can help a fair bit. There's plenty here who've been fixing these things for >25 years. cheers
    • Hi all. First off, thanks for reading my post. So end of last season I put the car away knowing I was leaking at least two fluids. One of them being rear turbo's oil. I went to my car recently that is waiting in a garage to take a peek with my boroscope to try and see if I can narrow down the souce of oil before taking it out of storage. What I found is not so great I think. The rear turbo is (probably) leaking from the oil drain. The hose and it's clamps are probably the original ones, so most likely just worn out or loose. However I spotted a line of rust going straight down from the turbo oil feed, as if water leaked out of there at some point. Also explains the red liquid that was dripping from my front subframe, which I initially thought was power steering. I can even see coolant drops hanging off the side of the oil pan as well. After a quick hit on the web I found a select few discussions about porous engine blocks. My question is if the pics of the turbo oil feed and the left hand side of the block (imgur link below) looks like it could be exactly that to you. Maybe someone in the community has seen it before and knows what it looks like. If it actually is a porously leaking block, has anyone attempted at fixing it with simple methods like putting a sealer in the cooling system and using something like jb weld on the block surface, or will it just leak in 2 weeks again? I could not find any detailed info or pictures on this topic. If I need a new engine, tell me softly. https://imgur.com/a/knVvmZ8
    • Hey all. I'm 23 and from Germany, September last year I bought a mildly modded 1995 GTR Vspec. Looks great and was fun so far, but I already have a list of issues of various severity that I need to take care of, potentially growing longer the closer I look. I just hope I'm not in over my head, I really want to keep the car and work towards it becoming great. I hope y'all will help me out in getting there, I am positive I will need help sooner rather than later to figure out how to proceed. greetings, some pics of the car I posted to imgur. https://imgur.com/a/StKkabz
    • Would be interesting what the price would be without the barracuda wheels. Looks like he dropped it down to 40k. Maybe his mate wasn't correct about the 50k evaluation. Has always been a dream of mine to own an auto 33. Looks like I'll have to keep saving my pocket money or ask mum for more pocket money.
    • Thinking about importing a stagea as a family car since i’m getting married this year, thoughts? Me and my fiance both like stageas, but don’t have any experience with them
×
×
  • Create New...